Hi,
i'm new in the forum and in ML RAW hack world.
I choose to install it on my camera because i wanted to be able to make my 5D an equal and right support camera to use with my others, Blackmagic Cinema Camera 2.5K and a Canon C300.
But! Going straight to the point:
I. In both RAW and MLV hack my 5D skips frames. How come?
This is the situation:
- Komputerbay 128GB 1000x CF.
- Camera is set to 1920x1080 24fps ALL-I.
- Override is set to 29.976.
- Camera is set specifically and only on RAW image quality.
- Just for now in ML Frame Skipping is Allowed.
- Use SRM job memory is ON.
- Small hack is ON.
What isn't mentioned in the list and is bound to RAW recording is set to OFF.
II. Yesterday i recorded my FIRST over 4.29GB RAW (not MLV) file and when i tried - as usual - to transcode it using MLRawViewer the application crashed. So i tried to use RAW Magic and it appears to be a split and not complete file. So, i can glue the file together, or how can i transcode it as it is?
Probably the second question was already answered many times, so sorry to bother, but i'd like a recap.
Thx
Set your CF card to exFat.
Not sure why would you override to 29.976fps with Camera set @ 24fps? It'd be ideal to set 29.976fps and not use override unless you want to shoot in exact 30fps.
Also with KB 128GB 1066x card -- it's going to skip frames at full 1080p and try to lower resolution such as 1856x1044 which should work without skipping.
(https://farm9.staticflickr.com/8653/16501390111_31355fd871_n.jpg) (https://flic.kr/p/r9aWo4) (https://farm8.staticflickr.com/7298/16501389951_f208576083_n.jpg) (https://flic.kr/p/r9aWki)
If it does skip then try with Card Warm-Up enabled which should help do the trick.
Reminder: RAWMagic isn't supported here on ML (read here (http://www.magiclantern.fm/forum/index.php?topic=13335.0read%20here)) -- since you are on a Mac try either MLVFS (only supports MLV files) or cr2hdr-r which works really well for both MLV & RAW.