Hi Guys,
First time poster here, my camera is almost a brick. I was using it last night to capture an image through a windows application and it hung. I tried to "safely remove" it from windows which did not work. So I powered down the laptop and the camera. When I turned on the camera I got a Error 70 on all modes except the C1, C2, C3 modes, so I can get to the menu
I have tried the following techniques without any success:
1. Removed battery and coin battery and left it overnight
2. Reformatted the CF card
3. Changed the settings for the C1, C2, C3
4. Tried solution 0, 0.5 of http://wiki.magiclantern.fm/unbricking
I've run out of my technical knowledge of the Magic Lantern and Canon, can someone please assist me?
Error Log:
ASSERT: FALSE at BurstMgr.c:157, task RscMgr lv:0 mode:4
Magic Lantern version : Nightly.2015Jul02.5D2212
Mercurial changeset : bcd2d84120a5 (unified) tip
Built on 2015-07-01 22:09:50 UTC by
[email protected].
Free Memory : 129K + 4261K
Log File:
Tue Jan 1 00:24:29 2008
Tue Jan 1 00:24:29 2008
0: 8.809 [STARTUP] ICU Firmware Version 2.1.2 ( 6.9.8 )
1: 8.872 [STARTUP] ICU Release DateTime 2011.12.07 11:53:55
2: 9.062 [SEQ] CreateSequencer (Startup, Num = 6)
3: 9.280 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
4: 10.204 [SEQ] seqEventDispatch (Startup, 0)
5: 10.230 [STARTUP] startupEntry
6: 43.432 [PROPST] dwNewAeModeDial = 0
7: 43.602 [PROPST] PROP_MOVIE_SOUND_RECORD_FOR_CREATIVE 0 0 3 ######
8: 43.700 [PROPST] PROP_MOVIE_SOUND_RECORD 0 3 0 3 ######
9: 43.974 [PROPST] PROP_MOVIE_SOUND_RECORD 0 3 3 3 ######
10: 44.185 [PROPST] PROP_MOVIE_SOUND_RECORD_FOR_CREATIVE 0 3 3 ######
11: 47.681 [HPD] TOEDetectISR 0
12: 47.722 [HPD] CreateTask Master End
13: 48.870 [FIO] [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
14: 49.007 [FIO] [EM] emSlaveChangeCBR : UILOCK (0x0)
15: 86.284 [PROPST] dwNewAeModeDial = 16
16: 86.328 [PROPST] FromSaveTimming = 2(445)
17: 86.366 [PROPST] dwNewAeModeDial = 16
18: 87.317 [PROPST] PROP_MOVIE_SOUND_RECORD 16 2 3 3 ######
19: 87.537 [PROPST] PROP_MOVIE_SOUND_RECORD_FOR_CREATIVE 16 2 2 ######
20: 88.198 [STARTUP] startupPropAdminMain : End
21: 88.261 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
22: 88.339 [PROPST] PROP_MOVIE_SOUND_RECORD_FOR_CREATIVE 16 2 2 ######
23: 92.660 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
24: 93.111 [PROPST] dwNewAeModeDial = 16
25: 93.153 [PROPST] dwNewAeModeDial = 16
26: 93.994 [PRP] Complete WaitID = 0x80000001, 0x00000000(0)
27: 94.051 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1164
28: 94.522 [PRP] MovieParamData
29: 94.637 [PRP] #mode 0 size 0x0 , framerate 0x1e , type 0xf
30: 94.707 [PROPST] NTSC->PAL 0 25 12
31: 94.733 [PRP] #fRetry mode 0 size 0x0 , framerate 0x19 , type 0xc
32: 95.610 [SEQ] seqEventDispatch (Startup, 1)
33: 95.659 [STARTUP] startupPrepareProperty
34: 95.879 [STARTUP] startupChangeAckCBR (Ceres = 0, USB = -1)
35: 95.896 [STARTUP] Ceres Disappeared
36: 97.094 [FM] FM_Initialize (1, 0, 1)
37: 97.726 [FM] fmResultCBR (0x51c324)
38: 98.255 [FM] PROP_HDD_DCIM_PATH (/)
39: 98.503 [FC] FC_Initialize [drive:3][ClassID:39]
40: 98.707 [FM] PROP_CARD1_STATUS = 0x1
41: 98.804 [FM] PROP_CARD1_FOLDER_NUMBER = 100
42: 98.915 [FM] PROP_CARD2_STATUS = 0x0
43: 98.982 [FM] PROP_CARD2_FOLDER_NUMBER = 100
44: 99.075 [FM] PROP_CARD3_EXIST = 0
45: 99.108 [FM] PROP_CARD3_STATUS = 0x0
46: 99.146 [FM] PROP_CARD3_RECORD = 0 => 0
47: 99.182 [FM] PROP_CARD3_FOLDER_NUMBER = 100
48: 99.266 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
49: 99.302 [FM] PROP_CARD_EXTENSION = 0
50: 99.335 [FM] PROP_CURRENT_MEDIA = 1
51: 99.370 [FM] PROP_USBDEVICE_CONNECT = -1
52: 99.409 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 5518
53: 99.446 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
54: 99.540 [SEQ] seqEventDispatch (Startup, 2)
55: 99.561 [STARTUP] startupPrepareCapture
56: 100.524 [RSC] MemMgr 0 2
57: 100.548 [RSC] MemMgr 0 0
58: 100.562 [RSC] MemMgr 0 4
59: 100.572 [RSC] MemMgr 0 0
60: 100.812 [RSC] RearrangeMemMgr 0 4
,.........
Can someone please assist me, im stuck with a almost un-usable camera as I normally shoot in M.
Can someone please help me? Camera is almost useless now.
Did you wait 5 seconds before pulling CF card out?
Have you tried this ?
http://www.magiclantern.fm/forum/index.php?topic=4105.msg111403#msg111403
Google is your friend here ,
Here is a good thread to read , there some Diagnostic tools there for 5d2
http://www.magiclantern.fm/forum/index.php?topic=2296.msg8815#msg8815
You have do some reading , I seen that problem before on the forum but not sure what the extract fix was.
Search for any posts about error 70 , from "a1ex"
Hope that helps
edit: read this --> http://www.magiclantern.fm/forum/index.php?topic=10138.0
Did you try this ? http://www.magiclantern.fm/forum/index.php?topic=14915.msg144540#msg144540
Hello all,
I have the similar problem with 5D Mark ii.
The crash log shows:
ASSERT: FALSE
at BurstMgr.c:172, task RscMgr
lv:0 mode:0
Magic Lantern version : Nightly.2015Aug19.5D2212
Mercurial changeset : 8d48d164e83a (unified) tip
Built on 2015-08-18 22:10:02 UTC by
[email protected].
Free Memory : 128K + 4257K
and the my log file is under this link:
allegro.ventis.com.pl/log003.log (http://allegro.ventis.com.pl/log003.log)
I read about this error on another topic with canon 60D, and there is possibility to clear camera settings but you need modified autoexec.bin with assertions disabled.
Could somebody send us a modified autoexec.bin (with disabled assertions) for canon 5D Mark ii to try this solution.
My e-mail is :
[email protected]I tried to compile ML by myself but I failed during installing tools for compilation.
I will be grateful for any help.
Regards Krzysztof
Hi reddeercity,
Thanks for your suggestions however I tried all the solutions on could find on this site. I believe I mind need a assistance with a new compile. Can someone help?
I have 5dmkii stuck on err70 except in C1,C2,C3,green square,CA tried downgrade to FW 1.2.4 etc.
Does someone have autoexec w/o error assrt ?
CRASH.LOG:
ASSERT: 0
at Stub.c:29, task RscMgr
lv:0 mode:0
RscMgr stack: 136d70 [136f88-135f88]
0xUNKNOWN @ ff8773e0:136f80
0xUNKNOWN @ ff9b9704:136f58
0xFF9B9160 @ ff82cd50:136f30
0xUNKNOWN @ ff9b9190:136f20
0xUNKNOWN @ ff9b9218:136f00
0xFF8AF518 @ ff8b0d98:136ed0
0xFF9F3FD8 @ ff8af664:136de0
0xFFC47B64 @ ff9f4030:136db0
0xFF814CCC @ ff813168:136da8
0x0004E378 @ 4e648:136d70
Magic Lantern version : Nightly.2018Jul03.5D2212
Mercurial changeset : 7a3b5fa3f4c6 (unified) tip
Built on 2018-07-02 22:17:35 UTC by jenkins@nightly.
Free Memory : 212K + 4208K
Have you tried clearing camera settings from Canon menu?
If it doesn't help, send me your ROM backups via PM.
Just for worst case: How good are your soldering skills or do you have a hardware nerd/maker community around?
Location?