Having tested the 128gb 1000x Komputerbay Card, I used it on a shoot this evening, all was fine and its w/s was consistent; didn't drop any frames. However as I dropped it onto my Mac the CF card reader 2.0 appears to have tripped the card and now a message reads: 'computer cannot read.....would you like to initialize'.
Is there anyway to retrieve the data/fix the card?
I have looked for this thread but couldn't find the answer anywhere but I apologize in advance if it does exist.
Thanks in advance for any suggestions.
I think there should be a large banner somewhere (or a sticky thread) saying:
Use only UDMA 7 enabled USB3 card readers with Komputerbay cards, to avoid any problems... :D
Not sure if you can fix the card, but you might be able to recover data with one of those card recovery software. There are plenty around.
Can`t recommend any, since I never used one.
rest your worry young one
return komputerbay
buy lexar 128gb 1066x
that is what I did
no more headache after, no frame drop at all at 1080p
I had similar issue on my Komputer bay 64GB 1000x card, was testing a May nightly build witt it....had to return it for replacement. I didnt know it has to be used with UDMA 7 enabled USB3 card. Thanks for the info.
I had exactly the simular problem. My card wasn't readable at any device. I guess the problem was, that the intern CF Card controller was broken. After some searching time in the web, I decided to send my card to http://card-recovery.biz. They recovered all my data and send me a FTP-Access within 3 days.
Stefan