Hi can i monitor my audio live on my 600d i have heard that it gives problems. Is it fixed can i use the audio controls also? and does the 600d still have that noise reduction or not?
Read the 600D audio thread. Yes you can monitor but monitoring volume seems different than recording volume.
What about the noise reduction i get alot of noise with the canon 600d with the rode ntg-2 how can i remove it i use a xlr to mini jack. I can't aford a portable audio mixer?
There are some filters but it can't do magic.
how can i apply these filters?
?
I don't think the code is there, you'll probably have to program them yourself by looking at the datasheet
i Just search abit i found something named Tragic Lantern does it work? or what can i do?
I get some bad sound when recording with my ntg-2 to my t3i via a xlr to mini jack cable?
here is a test http://www.youtube.com/watch?v=49UBuQVu-PA
Tragic Lantern is 1%'s fork of ML.
Audio for 600D will be added in 2.4 actually it's working in the nightly build (http://www.magiclantern.fm/forum/index.php?board=33.0).
You can turn on and off DC filter and wind filter and set the cut freq for the wind filter.
But to reduce noise I found better to have Analog gain low (+6 dB) and Mic boost high (+30 dB)
Quote from: scrax on November 10, 2012, 03:41:02 PM
Tragic Lantern is 1%'s fork of ML.
Audio for 600D will be added in 2.4 actually it's working in the nightly build (http://www.magiclantern.fm/forum/index.php?board=33.0).
You can turn on and off DC filter and wind filter and set the cut freq for the wind filter.
But to reduce noise I found better to have Analog gain low (+6 dB) and Mic boost high (+30 dB)
When will it be released? And can i download the 600d test file or would it be bether to wait to the release if 2.4?
You can use the nightly builds. There's no release date planned for 2.4 yet
It says when i try to get into the download page in the nightly build. it gives me an error "opps file not found" and for the "jp" site it can't get acces.
I downloaded Tragic last night. I also read that it has not got the 4GB limit. Is this true?
Can someone help me with the error?
Copy / paste the error you get... ::)
The nightly builds server is located at: http://nanomad.magiclantern.fm/nightly/
"Oops, you've found a dead link 404" on bitbucket and " Forbidden You don't have permission to access /pub/betauploader/600Daudio/ on this server" on the JP site
Well, you weren't looking at the nightly builds page then ;)
Go to the link I provided
Yours works but it was here i could not use the link http://www.magiclantern.fm/forum/index.php?topic=2032.0
Do you know what settings i should set it on in the menu (i have installed the nightly build now) for getting best audio with ntg-2 and t3i?
Not really, just make sure you turn off AGC and don't exaggerate with the camera-gain
Does headphone monitoring working on this nightly build ?
It should.
I wanna try this nightly build, but i've some questions before.
1. Is there something other different to v 2.3 or only audio?
2. Can you give me the direct link to the nightly build?
3. How to install? Only replace autoexe?
Quote from: LvP on December 21, 2012, 01:15:30 PM
I wanna try this nightly build, but i've some questions before.
1. Is there something other different to v 2.3 or only audio?
2. Can you give me the direct link to the nightly build?
3. How to install? Only replace autoexe?
1. a lot of things, an incomplete draft of what's new is in the nightly forum (fell free to add what you found).
2. Here you can find discussions about nightly and the link for downloading them
3, Yes, only the autoexec.bin is changed, other file are same as 2.3 (for the camera that were supported in 2.3 of course) so keep them
Quote from: nikoli on November 09, 2012, 01:09:26 PM
What about the noise reduction i get alot of noise with the canon 600d with the rode ntg-2 how can i remove it i use a xlr to mini jack. I can't aford a portable audio mixer?
dude all u need its not expensive mixer only most profesional Audio editiong software what is called SoundForge..
and your sound will never got NOIZE...tip add VSTdx drapper and milions of VST Plugins
Edit :
i just check this your microphone.. it looks liek quite coolstuff..
tel lme what version u use ? of ML .. nightly or 2.3v ...
in nightly u got extra few audio controlers but that is test version so i sugest stick to 2.3v.
im not realy sure what typeof input is in canon t3 for microfphone.. but it can be mono input ...and if your mic is stereo try to not put jack full in side camera input for mic..if u put it all .. stereo jack in mono mic input some weird things can happend..they dont need to happend but they can...
always remember to keep you metters lower than orange areas and keep it never go on REd meters areas..
try to not use extra gain..if u use u must remember u Gain EVERYTHING AROUND !!!..so later in audio software its mess..better buy more sensitve mic with muche more frquencies range than add more gain..gain is cool but not to muche..
dude..try upload one more time this Sound weird problem..im sure i cna hellp u with make it cool
I would like to monitor my sound on 600d runing 2.3 nightly but i havent a monitor pluged in , when i connect the cable the screen goes off, is this possible?