Thanks britom and 1% :D
I am having trouble loading the modules from the build of 1%'s work. Turning on autoload of *some* modules seems to get others to load but there appears to be nothing in the console telling me which is failing. I'll see if I can enable them one by one to find the offender.
Now that I have enabled them one by one, I can get them all to load and can't repro this.
Can someone please include info on what is new in each build changes so we can follow it better thanks for great work guys!
Quote from: edingacic on September 06, 2013, 01:33:02 AM
Can someone please include info on what is new in each build changes so we can follow it better thanks for great work guys!
https://bitbucket.org/hudson/magic-lantern
http://nanomad.magiclantern.fm/nightly/ChangeLog.txt <== Not currently updating.
https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all
Looks like britom is providing some information in his OP also!
eeh.. I was thinking.. is it hard to learn how to build the latest stuff you guys do your self?
I'm not a programmer but would love to test the newest stuff as it comes.. I have tried to take a look around but cannot find any thing about how to build the 7D stuff your self?
Is there a hidden forum thread or something I cant find?
Quote from: jphansen on September 08, 2013, 02:02:01 PM
eeh.. I was thinking.. is it hard to learn how to build the latest stuff you guys do your self?
I'm not a programmer but would love to test the newest stuff as it comes.. I have tried to take a look around but cannot find any thing about how to build the 7D stuff your self?
Is there a hidden forum thread or something I cant find?
Get your compiling systems setup and you will be able to build any camera supported.
I recommend using Vbox http://www.magiclantern.fm/forum/index.php?topic=7579.0
Quote from: jphansen on September 08, 2013, 02:02:01 PM
eeh.. I was thinking.. is it hard to learn how to build the latest stuff you guys do your self?
I'm not a programmer but would love to test the newest stuff as it comes.. I have tried to take a look around but cannot find any thing about how to build the 7D stuff your self?
Is there a hidden forum thread or something I cant find?
Next time try harder! :)
http://www.magiclantern.fm/forum/index.php?topic=7508.0
http://www.magiclantern.fm/forum/index.php?topic=991.0
http://www.magiclantern.fm/forum/index.php?topic=2899.0
http://www.magiclantern.fm/forum/index.php?topic=7503.0
...
Doh.. 2nd link was the one i was looking for.. Thanx :-)
i Think i found a bug in the 08/09/2013 1% build:
When you record a clip (in mpg4) and then play it, the audio stops to work the next time you record another clip
regards
Could be.... but now it has full audio controls so maybe not anymore, I'll have to check.
Hi,
Is the 1% build from 12/09/2013 the latest build for 7D raw?
Yes :)
Thank you.
u welcome, hope u enjoy ML :D
just put alpha 2 on and tested low light. 1344x560 i believe. force 18fps 2:3 crop.
Camera<Memory card<RAWMagic<Lightroom (edit - export into full res Adobe .jpg<FCPx<change duration to 1, consolidate clips<touch up more<export to youtube
this is a single fireplace light in the apartment. dont remember everything but i believe it was 800 iso..dont remember shutter or Aperture.
did diff kinda grades and clean ups. some have a fuzzyish ring still in dark and bright spots.. any way to remove?
here is a sample..
any suggestions?
i usually do .tiff but i just did jpeg for speed purposes. to excited to get it workin for more then 1 second lol.
Today I received a 16gb Lexar 1000x, but I do not understand why I can not get through the video size 1728x972.
This is the message
1984 is not possible in current video mode (max 1728)
It's the maximum that is supported for now. For more resolution you need to use the crop in 5x. Then you can achieve more hi resolution and with out skipping lines.
Quote from: Fringuello on September 17, 2013, 03:53:31 PM
Today I received a 16gb Lexar 1000x, but I do not understand why I can not get through the video size 1728x972.
This is the message
1984 is not possible in current video mode (max 1728)
It's because the camera skips pixels/photosites in 1x mode. So you only get 1 pixel for every 3. (this is also why the moire can be bad)
The 7D sensor is 5184 x 3456. Divided by 3 (every third pixel) you get 1728 x 1152. So you could change your aspect ratio to get more vertical resolution.
If you want to get more overall you need to go to crop mode which is a max of 2512 x 1200 IIRC.
Quote from: wheezl on September 17, 2013, 04:14:54 PM
It's because the camera skips pixels/photosites in 1x mode. So you only get 1 pixel for every 3. (this is also why the moire can be bad)
The 7D sensor is 5184 x 3456. Divided by 3 (every third pixel) you get 1728 x 1152. So you could change your aspect ratio to get more vertical resolution.
If you want to get more overall you need to go to crop mode which is a max of 2512 x 1200 IIRC.
tutorial
http://www.youtube.com/watch?v=WhiQ9D9vyPI (http://www.youtube.com/watch?v=WhiQ9D9vyPI)
Quote from: Fringuello on September 17, 2013, 04:24:44 PM
tutorial
http://www.youtube.com/watch?v=WhiQ9D9vyPI (http://www.youtube.com/watch?v=WhiQ9D9vyPI)
Yep. Different camera but the same idea. Just put it into crop mode if you want higher resolutions.
so if i use that tutorial.. shoot at 1728 x 1152 on a canon 7d with 24-105 Lens what would i set my crop to i was using 2:3 and it has error code 6. if i use the 1344 like i was i can run continuous for atleast 30 sec-1min (that ive tested) will upload a video from today soon.. just raw no color correction
got my 64 gb komputerbay card yesterday. but yet i'm not sure if the card is fast enough, or if i missed an option that should be set?
any possibility to update the first post with the most important settings for optimum raw recording performance?
i guess it's not just me who sort of lost track on the stuff-to-do over all the pages in the different threads..
is there any common average what values such a card should produce in the benchmark?
mine was like 46MB/s write and 52MB/s read with the first 2048 chunk..
1)when the raw rec is working,I press zoom will led to err40 ....
2)if the card is full ,the warm card is failed so that I can't boot/reboot my 7d.
3)when one raw video finish writing, but the next UI is not show, i press start/stop that to continue the next rec. it will led to write 2s mov file and then the 3rd second startup the raw video.... but mov file just have 0-2 seconds' information ...MLV file start working ...that is disordered...
4) dual iso doesn't work in raw video
5)9-12 version has 2 raw moduel,but raw moduel doesn't work, .mlv moduel just ok but can't review....
6) .mlv file is the .RAW file ? Rawanizer can't recongize *.mlv .... that say I should updata new version?
7) when the .mlv file reach 10G....it goes error .... couldn't go ahead ... :-\
8) .mlv moduel isn't offer any lossless data compression... look forward to the real .mlv compression format debut ....
Quotegot my 64 gb komputerbay card yesterday. but yet i'm not sure if the card is fast enough, or if i missed an option that should be set?
Its plenty fast. Turn off GD and dialog timers in the debug menu and you should be able to record either the full 17XXx115X or the 17XXx1038. In zoom it does ~1038 at 30P or whatever you can make with 75-77MB with FPS override on. The benchmarks are almost never what it will record with the module, they only seem useful for me in play mode as it shows I have a 90MB/s card and I'm missing ~9 MB/s somewhere from the "wonderful" canon ui.
strange. when i switch to 5x mode i can maximum record about 30-40 frames then recording stops because of skipped frames. :(
i'm having severe frame skipping issues now with the new card. can't get it to recording without skipping frames any more. at any FPS may it be 23,79, 24, 25 or 30. 5x or 1x. tried different resolutions. at 1920 i can't get beyond 10 frames or so.
pretty much out of ideas what could be wrong..
once the camera had locked up when switching to 5x mode and starting recording. couldn't reproduce it though..
did some more tests. seems like the infotext when switching resolutions is pretty correct. when it's green i can continuosly record. so where does this thing gets its information from? seems like my card doesn't make any more than around 70mb/s? or is my cam too slow?!
when switching to 5x mode i really have to lower resolution. not even close to beeing able to record in around 1920.
once even liveview froze.
also changing zoom seems to slow down recording even with global draw off. maybe that magic zoom does interfere here?
You have to load the fir for it to work with FPS override, it gets the numbers from previous recorded video. The frozen 10x mode actually gives you some speed increase from further testing.
anyway to get sound while recording raw?
Test Video from using my settings listed above
f/7.0-9.0 - 1/100
iso 200-800
i had more from the play ground but deleted on accident..
using 1% build from 08/09/2013 (time to update :-), testing the new Sigma 18-35 in a local store :-)
I again had the failure that the outer AF-Points refused to work, the lens just goes for an back without finding anything, the center point worked fine
I switched to the green rectangle -> no focus is achieved
switching camera off an on, starting without ML (Set) -> nothing changed
after removing the CF card it worked
is anything I can look or log when this happens again?
(my 7D has ~180.000 shots, without ML this never happened)
Quote from: 1% on September 18, 2013, 05:33:27 PM
Its plenty fast. Turn off GD and dialog timers in the debug menu and you should be able to record either the full 17XXx115X or the 17XXx1038. In zoom it does ~1038 at 30P or whatever you can make with 75-77MB with FPS override on. The benchmarks are almost never what it will record with the module, they only seem useful for me in play mode as it shows I have a 90MB/s card and I'm missing ~9 MB/s somewhere from the "wonderful" canon ui.
mhh.. me stupid? i don't see a resolution above 17XXx972 or such? did i oversee something? need to test zoom a little further though.
uhmmmmm....
Use 5x zoom and then go to ML menu in raw resolution
Quoteanyway to get sound while recording raw?
Yea, but it loses packets/slows down raw.
QuoteI switched to the green rectangle -> no focus is achieved
So this bug is in LV? AF quick LV?
Quote from: 1% on September 22, 2013, 09:55:01 PM
So this bug is in LV? AF quick LV?
no, not in LV, in "normal" AF-Photo mode.
I switched to the green rectangle to switch of some special settings e.g. focus mode and focus on the star-button
I guess no focus is than achieved because the outer points are used too
Don't know if this is the right place to post this.
Further testing 1% build 12.09.13, I accidentally press start/stop button under PHOTO mode.
Is this meant to be either PHOTO or VIDEO mode? or just video mode.
(http://s23.postimg.org/5jet7ymx7/IMG_2919.jpg)
It's meant to be in movie mode only, but I think 1% doesn't care about this.
Thanks for the quick reply Alex, any idea what's causing the camera can shoot RAW video on photo mode?
Any chance you can help us?
As I said earlier, 1% removed my checks about movie mode. It's a really basic usability issue, so I don't agree with this change.
Anyway, you are no longer running my code, so I can't help you.
Copy that. And thank you.
I am sorry, but how do you install the 1% build? I currently have the 7d 2.0.3 alpha2 installed but I am getting corrupted frames and frame drop. I use the Transcend 1000x 32GB card but I can't record at the max resolution possible without the camera stop recording after only a few hundred frames. Thanks
Quote from: PANDETTA on September 23, 2013, 06:10:58 PM
I am sorry, but how do you install the 1% build? I currently have the 7d 2.0.3 alpha2 installed but I am getting corrupted frames and frame drop. I use the Transcend 1000x 32GB card but I can't record at the max resolution possible without the camera stop recording after only a few hundred frames. Thanks
http://www.magiclantern.fm/forum/index.php?topic=7987
Download and copy, overwriting the existent one's on the cf card.
Video Mode Zoom... 72.1 MB/s
Photo Mode Zoom 72.2-.4 MB/s
that's about the only difference I see for 7D, I recorded 1728x1038. I had a freeze when the card filled in both modes but the file wrote out completely.
The indicators screw up at around 45GB of one video in MLV. Wrote 14:15, 20491 frames.
Holy shit, MLV is winning now. While it doesn't have the highest throughput it keeps recording going longer.
Is it impossible to record without corrupted frames? because I get a lot of them. I am using Transcend 1000x 32GB CF card and MLV module. Thanks
Try timers off for the duration of raw recording or use the raw module. For me its usually frame 2 with MLV, + lack of batch processing is starting to hurt.
Are your bad frames at regular intervals and is GD off while recording?
Quote from: 1% on September 24, 2013, 03:57:38 AM
Try timers off for the duration of raw recording or use the raw module. For me its usually frame 2 with MLV, + lack of batch processing is starting to hurt.
Are your bad frames at regular intervals and is GD off while recording?
No, they are very random. In a 10 seconds clip, it will have 1-5 bad frames.
Um... Sorry, what is "GD" ?
GD= Global Draw
Oh! Yes I disabled GD in my most recent test and it still had 1-2 bad frames but definitely fewer than with GD on.
Suddenly I think of a question. Will hooking up monitors causes any raw recording performance problems? Thanks
HDMI: usually yes.
how do i turn back on sound without raw?
Canon menu.
i looked all it said was AUTO - MANUAL - DISABLE and its on Auto.. and i tried Manual. and everytime i hit record it flashes SOUND DISABLED and then it continues to record with no audio.
Quote from: 1% on September 23, 2013, 06:27:23 PM
Video Mode Zoom... 72.1 MB/s
Photo Mode Zoom 72.2-.4 MB/s
that's about the only difference I see for 7D, I recorded 1728x1038. I had a freeze when the card filled in both modes but the file wrote out completely.
The indicators screw up at around 45GB of one video in MLV. Wrote 14:15, 20491 frames.
Holy shit, MLV is winning now. While it doesn't have the highest throughput it keeps recording going longer.
Crop mode can reach 76.5 mb/s so that can make 5422 frames in 2048X872 29.951p rec.
why crop mode just work in 29.951p instead of 24p or 50/60p mode?
Quoteeverytime i hit record it flashes SOUND DISABLED and then it continues to record with no audio.
Check FPS override is off + video hacks are off and separate wav is not enabled.
Speeds will vary but 0x5 = good in zoom, 0x6 good in 1x
it was FPS override that was doing it.
thanks 1% dont wanna be a troll, but i feel i get 1 ETA question lol.
so whats atleast a date for a Update or what will be in the next update? hopefully sound?
Update:
now i have 2 raw video choices?
Only load one raw module. mlv or raw_rec
The next signed build will happen when I figure out the memory error so you can have
headphone/videohacks/fps without it crashing.
Maybe edmac 05 for fir an 06 for bin so you can record full LV on the bin and zoom mode + fps in the fir?
I want to record MLV but I can find a program on Mac that can convert it to what I need to put it in FCpx every program doesn't recognize the format .. I heard MLV is better than raw?
Quote from: 1% on September 24, 2013, 08:22:29 PM
Maybe edmac 05 for fir an 06 for bin so you can record full LV on the bin and zoom mode + fps in the fir?
It's one solution :D
Quote from: mrnv45 on September 24, 2013, 09:46:33 PM
I want to record MLV but I can find a program on Mac that can convert it to what I need to put it in FCpx every program doesn't recognize the format .. I heard MLV is better than raw?
MLV got more data/info inside of the file. I don't yet get who is more fast, already listened the 2 versions... But i think the MLV is what will be the future.
I use windows but i think they already got a version for mac and also MLV viewer for the mac.
let's try `~` 9-24
Other ones didn't work.
Quote from: mrnv45 on September 24, 2013, 09:46:33 PM
I want to record MLV but I can find a program on Mac that can convert it to what I need to put it in FCpx every program doesn't recognize the format .. I heard MLV is better than raw?
MLV converter: https://dl.dropboxusercontent.com/u/8769684/MLVConverter.app.zip
created by 8beeeaaat
I never used FCP, but I heard it doesn't support cinema DNG? That means you will have to adapt the offline editing thingy.
How to Edit Magic Lantern RAW Footage Offline
http://www.youtube.com/watch?v=jASBwVSOlXk&feature=c4-overview&list=UUM2FoYtC-2PQzMr_gDfQnHg
With 24.09.13 build i get arround 79mb stable write speed in raw_rec,, both way normal Lv end 5x zoom.
Well done 1%.
Thanks.
A long video mostly outside stuff on 5500k w/b. + 100-250 + f/9 + iso 250 in .raw format
rawmagic + lightroom +fcpx (color correction)
has a 5x zoom in there too...
hey, Briton
can you add ml.bot-fly.com to the list? it's got a 7D nightly build routinely built every night.
@feureau yes!
What's the actual download link for the night lies? That page confuses me.. Lol
Also what's the major difference in the 10/9 vs. nightly
ok, i just download - magiclantern-v2.3.NEXT.2013Oct08.7D203.zip 2013-10-09 05:022.0 MB from http://ml.bot-fly.com/...
i extract this whit winrar and copy to my cf card.. i update camera, and load raw.module. when i restart my 7d, camera freeze and i must to take the battery out.. i also download 09/10/2013
► Build updated to commit 11880a4 from 1% repository (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all)
https://www.dropbox.com/s/2o8cresqe0lv0hj/ML-ONEPERCENT-9-10-13.zip.. where is the fir file for this buildit...sory for my eng...
Quoterestart my 7d, camera freeze and i must to take the battery out
You need to have the right sym file with the release otherwise it won't load modules and freeze, then next reboot should say modules not loaded.
I haven't made a new fir yet, it only has video hacks and vignetting which doesn't look like it does anything.
So should I upload to 10-9-13 ? I'm on the last update
Make sure when you update autoexec.bin you also update modules/7DXXX.sym from the same release
Quote
Nightly Builds:
Updated from 1% repository (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all)
http://ml.bot-fly.com/
I have version 09/10 how to upgrade?
I don't know what is "sym file"this is too much for me. I give up, maybe I'll find someone who knows better eng. from me, and help me understand how run Ml on my 7d. anyway thx 1%!
sym file = 7D_203.sym
It goes in ML/Modules folder... its the symbols from the autoexec.bin... if it doesn't match your modules don't load and camera crashes. So if you only copy new autoexec.bin to your card then it won't boot. If copying a text file is too much maybe computers aren't for you.
Quote from: szymszymon on October 10, 2013, 06:37:47 PM
I don't know what is "sym file"this is too much for me. I give up, maybe I'll find someone who knows better eng. from me, and help me understand how run Ml on my 7d. anyway thx 1%!
Io sono italiano di cosa hai bisogno?
I am Italian what do you need?
Quote from: 1% on October 10, 2013, 06:46:02 PM
sym file = 7D_203.sym
It goes in ML/Modules folder... its the symbols from the autoexec.bin... if it doesn't match your modules don't load and camera crashes. So if you only copy new autoexec.bin to your card then it won't boot. If copying a text file is too much maybe computers aren't for you.
I copy all files from the v2.3.NEXT.2013Sep30.7D203 (2).zip, not only autoexec.bin. this folder contains everything I need? I wrote before...I run Ml
"ok, I just download - magiclantern-v2.3.NEXT.2013Oct08.7D203.zip 2013-10-09 05:022.0 MB from http://ml.bot-fly.com/...
I extract this whit winrar and copy to my cf card.. I update camera, and load raw.module. when i restart my 7d, camera freeze and i must to take the battery out.."
I have sym file = 7D_203.sym in modules...
"If copying a text file is too much maybe computers aren't for you."text file?... i must read everything twice...probably, english its my problem, not the computer...:)
If you open the .sym its just a text file with address + names of functions ... maybe that compile is broken? The next one failed I think its because I was still working at the time it was compiling. Yesterday I merged bolt_raw and I have no errors making in the morning so wait till the next day maybe?
Quote from: 1% on October 10, 2013, 08:51:06 PM
If you open the .sym its just a text file with address + names of functions ... maybe that compile is broken? The next one failed I think its because I was still working at the time it was compiling. Yesterday I merged bolt_raw and I have no errors making in the morning so wait till the next day maybe?
right click mouse...open with wordpad, I know...I'm not a computer specialist, however I'm not so stupid...thx for help, I'll wait a little.. :)
You can also try one bin back from 08... there is 07/06/etc
I think there were some changes with dual ISO preview today but thats about it.
I've tried to update, it gives me the same errors
I can run only this build without complications...
12/09/2013
► 1% Build updated to commit f9bec4d (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all)
Includes a signed .fir version where you can use fps override and video hacks that can be booted via firmware update. (Does not modify your camera.)
http://bit.ly/1auyDTd
Thats pretty far back. None of the nightlies work for you?
This is straight off my card, just deleted settings and renamed MLV_REC
https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5B7D%5D%2010-10-13.zip
Quote from: 1% on October 11, 2013, 12:58:16 AM
Thats pretty far back. None of the nightlies work for you?
This is straight off my card, just deleted settings and renamed MLV_REC
https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads/%5B7D%5D%2010-10-13.zip
not works...the same as rest, apparently this not for me...i run ml, but when I load modules camera crash and I must take out battery...I surrender,and I do not waste your time..thanx for help 1%
Quote from: szymszymon on October 11, 2013, 11:46:23 AM
not works...the same as rest, apparently this not for me...i run ml, but when I load modules camera crash and I must take out battery...I surrender,and I do not waste your time..thanx for help 1%
maybe last chance...1% you may create fir file for [7D] 10-10-13 ?
Load the ol.zip first then drag and drop newer .zips. The new ones don't gave as many folders now. I am running 10/9 with no problem
Quotenot works...the same as rest, apparently this not for me...i run ml, but when I load modules camera crash and I must take out battery...I surrender,and I do not waste your time..thanx for help 1%
I bet you're missing something really simple.
Quote from: britom on August 30, 2013, 09:20:27 PM
Nightly Builds:
►Updated from 1% repository (https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/commits/all)
http://ml.bot-fly.com/
@1%
Could you explain better what is it and how do you?
Quote from: 1% on October 11, 2013, 03:41:59 PM
I bet you're missing something really simple.
I realy don't know how I did it... :) I format another cf on my pc...I update orginal software from the canon...then I use this method
http://www.magiclantern.fm/forum/index.php?topic=7464.0 and dowload
tragiclantern-v2.3.NEXT.2013Oct11.7D203.zip
2013-10-12 05:292.0 MB
I just drag and drop....and whala..:) works perfectly...maybe card is the problem...thx for help!!
i go rec something...hahaha :)
It seems that I have succeeded.
In mode crop arrives 2512x1200
after testing La7d has stalled
I'm using the 29/09/2013 build. When I record I do so with global draw off. The crop box remains on for a few seconds and then disappears for about 20 seconds. Is there any way to have this crop box on all the time with global draw?? Cheers for your help !
What is improved in this new verson?
You may find some information in the change log.
thank you! 8)
Quote from: StefanKeller.AC on September 20, 2013, 03:53:48 PM
using 1% build from 08/09/2013 (time to update :-), testing the new Sigma 18-35 in a local store :-)
I again had the failure that the outer AF-Points refused to work, the lens just goes for an back without finding anything, the center point worked fine
I switched to the green rectangle -> no focus is achieved
after removing the CF card it worked
I thought it may be a Problem with the camera, because I had this failure after restarting the camera without ML.
I now have a new 7D :-), but today the error occurred again, using tragiclantern-Tragic.2013Nov14.7D203
switching off/on didnt help, after removing battery it works fine.
Installed latest nightly... Single buffer one. Using toshiba xceria pro 1066 16gig. Raw recording speed is a lot slower compared to the previous build. I'm getting 75mb/s max. I have exactly the same card but with an older build and I'm getting 87-90mb/s. Same config on both cards.
You can turn off single buffering and its back to how it was. Its an option. The focus problem I'd have to reproduce... this camera doesn't have AF patterns or much of any focus related stuff.
Nope nothing changed :/
Dunno, nothing changed for me and the only thing added was related to memory allocation.
I can't test the new builds but with the last build is pink/corrupt frame free?
Quote from: arrinkiiii on December 09, 2013, 04:26:39 AM
I can't test the new builds but with the last build is pink/corrupt frame free?
Nope they still appear from time to time
Serious?? Damn!!
I haven't seen any in the middle of footage for a long long time... then again I kill dialog timers and turn off gd while recording.
Need to test.... grrrrrrrr :D Missing my ML machine :(
Quote from: 1% on December 09, 2013, 01:50:50 PM
I haven't seen any in the middle of footage for a long long time... then again I kill dialog timers and turn off gd while recording.
That seems to fix the pink frames but they still appear at the beginning(first or second frame) sometimes. Not a huge issue anyway.
More relief now if it's only the first frame =DD Better if none but cê la vie...
Quote from: arrinkiiii on December 09, 2013, 07:16:03 PM
More relief now if it's only the first frame =DD Better if none but cê la vie...
I'm sure that we will get there pretty soon ))
Hope so :D
Probably happens while GD/AE is being toggled. For narrative the first second or so is lost to slate/etc.
For me the first frame is fine, if it be fixed better.
same same :D
Every frame is fine for me
@moderators: what about merging with 7D Raw Thread (http://www.magiclantern.fm/forum/index.php?topic=7503) ?
No idea how to merge topics without the posts getting intertwined.
The test builds can be found here: http://www.magiclantern.fm/forum/index.php?topic=7987.0
And discussion should continue in this thread: http://www.magiclantern.fm/forum/index.php?topic=7503.0