7D Raw Thread

Started by noisyboy, August 05, 2013, 11:52:15 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

arrinkiiii

Quote from: kh3naz on August 10, 2013, 10:15:45 PM
Solved

Do already have the "new" ML in your camera? And camera are autoboot?


http://www.magiclantern.fm/forum/index.php?topic=7464.0


Good  :D 

Im curiouse for see how much an x1000 can handle the raw.

kh3naz

Well , i'm still trying to figure out how to install ML , i'm having some issues you can read my post Here:

http://www.magiclantern.fm/forum/index.php?topic=7464.msg65786#msg65786

EDIT:

Pelican gave me a link to an older version of EOScard.exe and ML is up and running

will test it out and hopefully post some results

nick.p

I've been trying out raw video on my camera and can record continuous 960x540 but I have a slow card. I'm also really interested to see what a x1000 card can do. The komputerbay 64gb looks good.

kh3naz

For now a 1000x card can shoot RAW continuous at these resolutions :

Quote from: ted ramasola on August 11, 2013, 05:49:09 AM
Here's a list of raw continuous recording resolutions using 1000x cf card

24P & 30P
1728 x 576
1600 x 534
1472 x 626
1344 x 610
1280 x 582
1152 x 622

60P
1728 x 308
1600 x 382
1472 x 420
1344 x 436
1280 x 486
1152 x 464

nick.p

Quote from: kh3naz on August 11, 2013, 06:40:23 AM
For now a 1000x card can shoot RAW continuous at these resolutions :
I wander what the write speeds were on that card. It doesn't seem to be at the 7d's potential.

kh3naz

Quote from: nick.p on August 11, 2013, 06:42:45 AM
I wander what the write speeds were on that card. It doesn't seem to be at the 7d's potential.

I have no idea , i'm just here to test whatever they throw at us  ;D

However i'm crossing my finger that the potential of the 7D is much better , that 2.5k with no line skipping thing is driving me nuts !

Going to post some tests tomorow

ted ramasola

Quote from: nick.p on August 11, 2013, 06:42:45 AM
I wander what the write speeds were on that card. It doesn't seem to be at the 7d's potential.

Here's the benchmark of the 1000x cf lexar done in the 7D.
5DmkII  / 7D
www.ramasolaproductions.com
Texas

nick.p

Quote from: ted ramasola on August 11, 2013, 07:59:22 AM
Here's the benchmark of the 1000x cf lexar done in the 7D.

I'm no expert but I quick guesstimate puts your maximum bitrate at approx 50 mB/s judging from your continuous 30p resolutions. That is a fair way under the write speeds you got here.

juantamad

Result on 7D KomputerBay 128GB 1000x

ted ramasola

Quote from: juantamad on August 11, 2013, 08:47:19 AM
Result on 7D KomputerBay 128GB 1000x


"Lazy John" ;)

Your among the few lucky ones that got the 128 to work on the 7D.
When did you get your card? Seems like its from an earlier batch (ver.1)
since the data rate is slower.

Ver 2 is now faster BUT we can't get them to work with both 5D and 7D.
5DmkII  / 7D
www.ramasolaproductions.com
Texas

juantamad

@ted
Thanks for the 1st sentence.
Last June.

I used 32GB Sandisk Extreme to install .fir on 7D.
Changed to 128GB KB, format card into camera.
Download "Pelicans" modules.
I used BootDisk for MACOS X 10.8

ted ramasola

Quote from: juantamad on August 11, 2013, 09:06:34 AM
@ted
Thanks for the 1st sentence.
Last June.

I used 32GB Sandisk Extreme to install .fir on 7D.
Changed to 128GB KB, format card into camera.
Download "Pelicans" modules.
I used BootDisk for MACOS X 10.8

Thank you for providing that information.

5DmkII  / 7D
www.ramasolaproductions.com
Texas

Walter Schulz

Bug:

After recording the screen freezes and doesn't switch back to "liveview". (EDIT): Press Menu -> Shutter release half pressed (or any other button) -> back to normal.

Clean install today, downloaded RAW module from Pelican's site.

Ciao, Walter

obiyan19

got same, after recording, screen freeze, but still record. half press not back to normal. i have to switch off live view...
600D + 7D + 5D2  // 24-105 L is ~ 100-400 L is ~ 18-200 is ~ 18-55 isII ~ sigma 50 f1.4 EX

Pelican

Quote from: Walter Schulz on August 11, 2013, 10:44:53 AM

After recording the screen freezes and doesn't switch back to "liveview". (EDIT): Press Menu -> Shutter release half pressed (or any other button) -> back to normal.
Quote from: obiyan19 on August 11, 2013, 12:19:21 PM
got same, after recording, screen freeze, but still record. half press not back to normal. i have to switch off live view...
After recording? Not instantly?
For me the screen freezes in that moment when I start the record (push the Start/Stop button).
EOS 7D Mark II, EOS 7D, EOS 5, EOS 100 + lenses (10mm to 300mm), 600EX, 550EX, YN600EX x 3
EOScard, EOS DSLR firmwares, ARMu, NiControl, etc.: http://pel.hu/down

Walter Schulz

Of course you're right! It freezes the moment the record is *started*. Sorry for my germish ...
If the record session is stopped by pressing the record button again the screen remain frozen but it will get unlocked by MENU and shutter release half pressed. If you press MENU during recording you will get stuck with a blank screen after pressing shutter release half. Stop recording, press PLAY and then shutter release half and you're back to live view.

Ciao, Walter

wheezl

I get the same behavior.   It freezes instantly after the button is pressed.

EDIT:  I should add that my zebras continue to update properly.

obiyan19

Quote from: Pelican on August 11, 2013, 12:59:28 PM
After recording? Not instantly?
For me the screen freezes in that moment when I start the record (push the Start/Stop button).

yesn sorry , screen freeze when start...
600D + 7D + 5D2  // 24-105 L is ~ 100-400 L is ~ 18-200 is ~ 18-55 isII ~ sigma 50 f1.4 EX

africanmarty

Quote from: Walter Schulz on August 11, 2013, 01:09:06 PM
Of course you're right! It freezes the moment the record is *started*. Sorry for my germish ...
If the record session is stopped by pressing the record button again the screen remain frozen but it will get unlocked by MENU and shutter release half pressed. If you press MENU during recording you will get stuck with a blank screen after pressing shutter release half. Stop recording, press PLAY and then shutter release half and you're back to live view.

Ciao, Walter

I am experiencing the exact same behavior. Do you guys think it could be due to my slow CF cards ?? evan though i am trying to record raw video at the lowest resolution. The cards is am using are the PQi 32GB 150x and the Sandisk extreme 4GB. regards Marty. PS: great for ML team for all the developing :) and users for the contributions.

Walter Schulz

This issue doesn't have anything to do with card speed.

arrinkiiii

Quote from: Walter Schulz on August 11, 2013, 02:29:51 PM
This issue doesn't have anything to do with card speed.

Indeed, it's code.

edingacic

Quote from: arrinkiiii on August 11, 2013, 02:35:21 PM
Indeed, it's code.

now that Pelican is gone till october anyone up to the task to finish this great raw rec module?

kh3naz

Quote from: edingacic on August 11, 2013, 03:52:13 PM
now that Pelican is gone till october anyone up to the task to finish this great raw rec module?

Nobody else is working on the 7D ?

edingacic

As far as I understand no

arrinkiiii


I'm afraid not, at least for raw module. A1ex and g3gg0 working in other stuff...  we will benefit from it but we need some one that can work in the raw module.