SOME HELP FOR BEGINNERSINSTALLING ML RAW
READ THIS THREAD: http://www.magiclantern.fm/forum/index.php?topic=5520.0
You've got ML already on your camera/SD card - good.
Now all you need to do is download the nightly build & then copy what you find onto your SD card (you'll be replacing old ML stuff, but don't worry).
Put your SD back into your camera & you should now find a Modules section in ML menu.
Turn on/activate what you want from that menu (the RAW_Rec or RAW_MLV modules are there & other goodies) & then restart your camera.
Go to video section in ML menu & turn on RAW rec.
Just a little note, the 60D is serverely hampered & will not do continuous RAW recording - faster cards will not help, its the card slot (21mbs max).
In the Canon Menu turn the picture quality to S3 (JPEG) only - you'll be able to record for longer.
When recording turn Global Draw off - again helps recording.
I use 1280x... crop modes - they upscale nicely to HD & give adequate recording times.
Also, the wider the aspect ratio setting the longer the recording time.NOISE & ETTR:
Ok, so the noise issue is because you aren't following the ETTR rule - more light=better detail & less noise.
Here's a video i made to demonstrate exactly why you should be following ETTR:
Use the Raw Zebras & a good reading should be about -0.4ev (you're nearly or just a bit overexposing).
I tend to use a higher ISO (400/800) & an ND filter, but if you make sure that you're exposing [enough] to the right (ETTR) & have good light then most ISOs should be fine.
Just remember that this is RAW & you'll have to do post work - you can recover everything!
Read This: http://schewephoto.com/ETTR/
Here's a link to Marrek's build that gets rid of the bad pixels (you need to turn on LV_AF_Raw in the Raw Video menu).https://www.dropbox.com/s/0jiq5wuzwp6igyi/ml60d_01_09_2013.zip
Here's a link to an earlier version (can't remember which one works best - think the one above has Dual ISO as well & some other stuff):https://docs.google.com/file/d/0B-HdscXfsKpgbTJiT18tcS1ldjA/edit?usp=sharing&pli=1
It works & is the only workaround for the 60D ATM.
Don't be afraid to use the lesser crop modes - I find 1280x... upscales really nicely & you get longer recording times!
Also, remember to change the Picture Quality in the Canon Menu from SRAW to S2 (jpeg) - you'll get longer recording times.
Turn Global Draw off when recording.
And finally, if you want really high res bursts (i.e. higher than 1728x...) you can achieve this by doing the following:
Press x5 zoom button (remember to turn off Global raw first & set Frames Per Second Override!)
Press ML Menu button
Goto Raw Video Menu & you'll notice that you can go further on the Resolution scale (max 2512x...., but i use 2240x.... to be safe).
Exit ML Menu
DO NOT EXIT x5 zoom mode
Press record & you should be able to get about 73frames.
Its not perfect, but once you find a higher resolution that works well it can add to your videos.