RAW video & ML -- Beginners Guide, FAQ & Useful Links -- READ FIRST

Started by RenatoPhoto, May 20, 2013, 05:14:36 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

RenatoPhoto

This original post is now outdated.

See:
Magic Lantern (RAW) Video format v2.0 (mlv_rec.mo)
MLV Lite
Crop mode recording (crop_rec.mo) (1:1, RAW/H.264, 25/30/50/60 fps)
crop_rec on steroids: 3K, 4K, 1080p48, full-resolution LiveView



Original post:
Updated Jan 04 2014

[b][size=14pt]Welcome to the world of RAW recording with Magic Lantern.[/size][/b]

Installing ML can be summarized in three steps, keep this in mind in case you are getting lost in the process!

1. You need to set the bootflag in your camera.  Only for 5D3 this cannot be undone so read here:
http://www.magiclantern.fm/forum/index.php?topic=7125.0

2. You need to make your SD card (or CF for some cameras) bootable with EOScard

3. Only then you can use the nightly builds.

-------------------------------------------------------------------------------------------

[color=blue][size=14pt][b]Quick Setup Guide for 5D3[/b][/size]

Here is a simplified procedure that works.

1. Format card on PC ([u]must use card reader[/u]) and then format on Camera.
2. Put card back on card reader (PC) and copy the fir file to the card root directory.  Get it here: http://a1ex.magiclantern.fm/bleeding-edge/5D3/5D3-113-bootflag.fir
3. Put card back on Camera and go to the Firmaware update section (Canon Menu) do an update with the 5D3-113-bootflag.fir  Make sure you have a full battery, a dead battery during firmware update could be a disaster.
4. Once the firmware update is finished you have set the bootflag on your camera. 
5. Put card back on the card reader
6. Use EOScard to make the card bootable, which is the main reason to use EOScard.exe
    get it here: http://pel.hu/eoscard/  or  http://pel.bencemate.com/eoscard/
7. [u]Make sure EOS Develop box is selected, Bootdisk box is selected and simply click on Save.  If all goes well the card will be made bootable and a "write sucessfull" message will appear on the bottom of EOScard.[/u]
8. EOScard sometimes fails to get the latest ML files so go to http://builds.magiclantern.fm/#/
and get the latest ML files.  If EOScard put some files in my card I would erase them and replace them with the latest compiles.

I only use EOScard to make my card bootable and use it only when I do a PC format of my card (almost never).  To stay up to date with the latest builds just go to  http://builds.magiclantern.fm/#/  and get the latest files.  Make sure you replace all of the existing files in your card so I always delete the existing files before I put the new ones.  Do not mix new files with old ML files.  Always replace the complete set, except for some modules that can be added separately.

Remember that if you format your card on the PC then the card has to be run through EOScard to make it bootable.

The EOScard added function of downloading the latest compile is a perk but apparently it does not always work and sometimes you end up putting the wrong ML files in your card.  In this case make sure you delete those files and get the latest.

[/color]
----------------------------------------------------------------

For the latest raw video capabilities of all supported cameras go here:
http://www.magiclantern.fm/forum/index.php?topic=6215.0

The best suited cameras for RAW are the ones that have CF cards which are faster then SD cards.  Other cameras with SD can also work but the RAW video is limited to lower frame size since the SD controller can only transfer at something like  30 to 40 MB/s depending on model.

5D3 is best and working very good.  Continuous recording at 1920x1080 up to 29.97 fps[color=red]  (Bootflag cannot be undone, this increases wake up time from 0.2 to 2 sec)[/color]
http://www.magiclantern.fm/forum/index.php?topic=7125.0
5D2 work in progress, continuous recording at 1880x940 at 24p or 1600x900 at 29.97 fps
7D work in progress, continuous 1728x972 24p.
6D work in progress, continuous recording at1840x460 at 24 fps
60D work in progress, continuous recording at 1584x1058 at 24fps
50D work in progress, continuous recording at 1584x1058 at 24fps
700D (T5i) work in progress, continuous recording 1280x720 24 fps.
650D (T4i) work in progress, continuous recording 1280x720 24 fps.
600D (T3i) work in progress, continuous recording 950x540 24 fps.
500D (T2i) work in progress, continuous recording 950x540? 24 fps.
550 & 550D work in progress, continuous recording 950x540 24 fps.
EOSM making progress 1280x720 at 24 fps.

Note: [b]... and audio recording with RAW video is not available yet.[/b]

There are two types of installs, one for ML proven cameras and the other for new cameras.

[b][size=14pt]Install for ML proven cameras:[/size][/b]

These are: 550D (T1i), 60D, 600D (T3i), 50D, 500D (T2i) , 5D2, and 1100D.

[b]Install Guide[/b] <--- this will install basic ML in your camera and you must do this first.
Here: http://wiki.magiclantern.fm/install

If you want to try the latest  features (including RAW) for these cameras then:
[b]Nightly Builds - try the very latest stuff:[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=3072.0

To try the new RAW development delete the old files from your card and copy the new ones obtained from above.
Direct link to the new builds:  http://builds.magiclantern.fm/#/

[b]IMPORTANT: Get a card reader, without it you will not be able to install ML.[/b]


[b][size=14pt]Install for other cameras:[/size][/b]

[b]IMPORTANT: Get a card reader, without it you will not be able to install ML.[/b]

[b]How to install Magic Lantern on 5D Mark III[/b]

A Tutorial linked by a1ex below in this thread for 5D Mark III

[youtube]http://www.youtube.com/watch?v=d7pn5Q6wNMY[/youtube]
Many thanks to Charlie Loc (correct spelling?) for creating it.

[b]Also here is a quick guide just for the 5D Mark III[/b]
http://www.cinema5d.com/news/?p=17898

If you do not want to set the bootflag then try the simple install (Not for RAW)
HERE: http://www.magiclantern.fm/forum/index.php?topic=2602.0
Make sure you are running Canon Firmware 1.1.3.

[b]HOW TO: A guide to installing ML on the 7D with recent features:[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=7464.0
Make sure you are running Canon Firmware 2.03

[b]Raw video on 50D[/b]
http://www.magiclantern.fm/forum/index.php?topic=5586.0

[b]60D RAW video - it's working !![/b]
http://www.magiclantern.fm/forum/index.php?topic=5653.0

[b]Magic Lantern for 6D | Dev kit releas[/b]ed:
HERE: http://www.magiclantern.fm/forum/index.php?topic=3904.0
Make sure you are running Canon 1.1.3

and also here:

6D - Install guide and raw shooting.
http://www.magiclantern.fm/forum/index.php?topic=5530.0

[b]Canon 700D / T5i[/b]
http://www.magiclantern.fm/forum/index.php?topic=5951.0

[b]Canon 650D [Status: Hello, world!]:[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=3697.0

[b]EOS M ** Alpha 1 ** [FIXED][DOWNLOAD]:[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=3648.0
[u][b]
OTHER CAMERAS:[/b][/u]

[b]Canon 1100D / T3:[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=1009.0
[b]
Canon 5D Classic Firmware ** Beta 4 **[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=1010.0
[b]
Canon 40D[/b]
http://www.magiclantern.fm/forum/index.php?topic=1452.0

-------------------------------------


[b]FINALLY INSTALLATION OF RAW VIDEO[/b]

[u][b]OK!  Now you should be familiar with ML for your camera and what you can do.  If you are one of the lucky owners of the DSLR that can do RAW Video then continue...[/b][/u]

Now that you have Magic Lantern installed and running on your camera, you are then ready to install RAW video.  The development team are continually making changes to the software and these changes compiled into builds which you can use to update your camera.

By now you know there is an autoexec.bin file in your card.  This file contains all the instruction on how your camera will behave and each new build will include all of those changes in this autoexec.bin file. 

So updating your camera software, in most cases, will require that you obtain the new autoexec.bin file to replace the old one.  In the case of the RAW video there are some additional files required, these files are inside the [b]Modules[/b] directory. 

Here is a directory structure in a typical ML install:

Root Directory:

DCIM (Canon DIR)
MiSC (Canon DIR)
ML (DIR)
autoexec.bin
xxx-bootflag.fir

Please note that the xxx-bootflag.fir  only needed to set the bootflag on the camera.  After this time this fir file can be deleted.


The first two are directories for Canon files.

[b]ML[/b] is the main directory for Magic Lantern and inside this directory there is typically up to the following directories:

cropmks (DIR)
data (DIR)
doc (DIR)
LOGS (DIR)
[b]MODULES[/b] (DIR)
scripts (DIR)
SETTINGS (DIR)

So the other update is inside [b]MODULES[/b] where you will find the following files:

magic.sym
raw_rec.mo
[u][b]

SUMMARY: [/b][/u]
1. Obtain new files for: autoexec.bin, magic.sym, raw_rec.mo
2. Replace the old files in the card.  That is all!!
3. Usually it is a good idea to delete the MAGIC.CFG file which is in the SETTINGS directory to start saving new configuration settings which may apply to the new (updated) changes.

[u][b]SPECIAL CASES:  [/b][/u]
On the newer cameras there are new files that are uses instead or in addition to the autoexec.bin files. 

[b]5D3[/b] If you installed the Alpha 3 + DevKit you will also have this special file which will need to be downloaded:
5D3-113-bootflag.fir  This file will set the boot flag when the camera boots from the card containing the file.
[b]
This flag cannot be undone yet so may want to read here first: [/b]
http://www.magiclantern.fm/forum/index.php?topic=5810.msg42407#msg42407

This file is found at the bottom of the instructions where it says [color=red]FOR DEVELOPERS ONLY[/color]  here :

Download ML for 5D Mark III - Alpha 3.
http://www.magiclantern.fm/forum/index.php?topic=2602.0

Put camera in [b]M[/b] mode

Put the 5D3-113-bootflag.fir flag on the root directory (SD card) and let your camera boot.  Wait until the update is finished.

[b]Now make your card bootable[/b]

Use EOS card 1.2 to make your card bootable.

Go to: http://wiki.magiclantern.fm/install

Scroll to:

[b]Installing Magic Lantern on other cards[/b]

Download EOScard from the link and make your card bootable.  You have to install EOScard and select the card that you want to make bootable.

Now  put all of the ML required files, your cam will boot with ML installed!

If you downloaded  [b]ML for 5D Mark III - Alpha 3[/b], you should have most of the standard files needed to make up the ML directory structure.  To this structure you need to add all the newest RAW files as previously noted.  You will find a link to the newest files below..

[b]
Special note on to use EOScard Utility:[/b]

This is the way to set the flag on the card:

When you use EOScard make sure that:
1. You have the necesary files in the SD card: *.fir file (only if you need to set the bootflag on that camera; this process to be done only once), autoexec.bin file, plus the ML directory.
2. The Utility recognizes the card by identifiying it in the box next to Refresh.
3. You select the EOS_DEVELOP  check box
4. You select the BOOTDISK check box
5. Under Content, make sure EOScard recognizes: DCIM folder, autoexec.bin file, ML folder, and if required (to enable the boot flag on camera) the fir file.  When EOScard recognizes all of those files it should give you a check mark or something like that.
6. Press the Save button.
7. Look on the bottom of EOScard and should give you a confirmation that the card was written, ie. write successful.

I recently read about another situations with the newer EOScard utility in which the automatic function brought the files to the SD via internet connection.  I am not familiar with this function but Pelican seems to more about it since he created EOScard utility.  Anyway the issue was that EOScard utility had downloaded some files plus there were already some files in the card, the user noticed that in the fir file area it showed like 2 files so the user had to select the correct fir file for the EOScard utility to properly prepare the card! One of the files was for Mac and the other was for windows.

Also on most cameras, except 5D3, if you enable the camera bootflag via firmware update, and then do it again you will be disabling the bootflag. In the 5D3 you cannot disable the camera bootfalg.  It is and ON-OFF process, so if you have a camera working and set the camera flag using the *.fir file you will be disabling the flag in the camera and ML wont start.

So remember to make a card bootable use EOScard utility, and to set the camera flag use *.fir file and do the firmware update.

[b]And... always use a card reader if you want this to work properly![/b]

----------

[u][b]Where to get the latest builds for RAW:[/b][/u]

[u][b]If you are a programmer then you can read to learn how to compile all this stuff by-yourself:[/b][/u]

[b]Getting started with development[/b]
Here:  http://www.magiclantern.fm/forum/index.php?topic=991.0
Here: http://www.magiclantern.fm/forum/index.php?topic=2899.0

[u][b]OTHER IMPORTANT LINKS FOR RAW VIDEO[/b][/u]

[u][b]To help the DEVS[/b][/u] and everybody it would be a good idea if specific RAW video issues are discussed in a [b]separate thread based on the camera under discussion.[/b]

5D3  [b]Uncompressed 14-bit RAW video testing - 5D Mark III[/b]
HERE:  http://www.magiclantern.fm/forum/index.php?topic=5473.0

5D2  [b]Raw video on 5DMK2[/b]
HERE:  http://www.magiclantern.fm/forum/index.php?topic=5419.0

600D [b]Uncompressed 600D Raw Video[/b] 
HERE: http://www.magiclantern.fm/forum/index.php?topic=5494.0

[b]6D + Raw thread (with instillation guide)[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=5530.msg37766#msg37766

[b]60D RAW video - it's working !!![/b]
http://www.magiclantern.fm/forum/index.php?topic=5653.0

[b]Canon 650D [Status: Hello, world!][/b]
http://www.magiclantern.fm/forum/index.php?topic=3697.0

[b]Raw video on 50d and 40d[/b]
http://www.magiclantern.fm/forum/index.php?topic=5586.msg38778;topicseen#msg38778

--------------------

[b]
[u]OTHER USEFUL LINKS:[/u][/b]

[b]Magic Lantern Best Practices:[/b]
http://www.magiclantern.fm/bestpractices

[b]How to install Magic Lantern on 5D Mark III[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=2602.0

[b]Where to get Canon Firmware 1.1.3 or any fw for any camera (Windows version) for sure:[/b]
HERE: http://pel.hu/eoscard/

[b]Where to get Canon Firmware 1.1.3 (Mac version) for sure:[/b]
HERE: http://hdslr.com.br/2012/06/20/atualizacao-de-firmware-para-5d-mark-iii-versao-1-1-3/

[b]How to install Magic Lantern on 5D Mark III[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=2602.0

[b]Where to get Compiled Nightly Builds?[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=3072.0

All questions regarding [b]RAW VIDEO POST PROCESSING on any OS[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=5404.0

All questions regarding [b]RAW_REC MODULE COMPILATION/INSTALLATION/USAGE[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=5405.0

[b]Supported 1000x CF cards for continuous RAW recording[/b]
HERE: http://www.magiclantern.fm/forum/index.php?topic=5391.0

*************************


Please help us keep our Forum Organized.  We have very specific areas for certain topics so try to conform so that everybody benefits.
[b]
If you have a question, don't post it[/b]! First use the search function on the forum (near the top left) and search for the key word.  If you have made a reasonable effort and cannot find an answer then please post your question in the appropriate forum.

[size=8pt][color=blue]Remove obsolete links to nightly builds and fixed remaining link to point to official nightly builds  // Audionut[/color][/size]
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

noisyboy

Quote from: RenatoPhoto on May 20, 2013, 05:14:36 AM
6D work in progress.. I need help for these details

Awesome work man! Just about to upload a 6D beginners guide and zip with all files needed myself dude :) Just want it to be proofed and tried by someone other than me before I mess anyones camera up :p

RenatoPhoto

Glad to help.  Only way I can pay back to society  ;D
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Robbe

Thanks for your BEGGINERS GUIDE!
Quote from: RenatoPhoto on May 20, 2013, 05:08:03 PM
SUMMARY:
1. Obtain new files for: autoexec.bin, magic.sym, raw_rec.mo, raw_rec.o
Where to get the 4 new files?

//RoBbe
//RobBe
Canon 5D MarkII, Canon 600D, EF 14mm, EF 15mm, EF 35-350, EF 70-200  ML: latest Nighly Build + RAW video module. 32GB Sandisk 800x (120 MB/s) card.


RenatoPhoto

Quote from: Robbe on May 21, 2013, 02:11:27 AM
Thanks for your BEGGINERS GUIDE!Where to get the 4 new files?

//RoBbe

As stated above here:

If you are not a programmer then you have to beg for someone to get you the new files

Newest compiled nightly Builds:
HERE: http://www.magiclantern.fm/forum/index.php?topic=5413.0
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Robbe

Do I just have to copy modules folder with 3 files to ML and replace autoexec.bin on the card with function latest nightly build in my 600D?
//RobBe
Canon 5D MarkII, Canon 600D, EF 14mm, EF 15mm, EF 35-350, EF 70-200  ML: latest Nighly Build + RAW video module. 32GB Sandisk 800x (120 MB/s) card.

RenatoPhoto

Quote from: Robbe on May 21, 2013, 12:20:23 PM
Do I just have to copy modules folder with 3 files to ML and replace autoexec.bin on the card with function latest nightly build in my 600D?
Yep, make sure you get the ones that apply to your camera. Each camera has different files.
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

haemma

Very useful, thank you!

If needed - I can translate the whole opening post into german.

RenatoPhoto

This is an open community and all helpers are welcome.  May want to use same format:
Re: How to:  -- Install RAW video & ML -- BEGINNERS GUIDE   (German)
or something like that.
Thanks for offering.
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Robbe

Quote from: RenatoPhoto on May 21, 2013, 12:36:05 PM
Yep, make sure you get the ones that apply to your camera. Each camera has different files.
Is there a version for 600D? Can only find for 6D, 5D2 and 5D3.
//RobBe
Canon 5D MarkII, Canon 600D, EF 14mm, EF 15mm, EF 35-350, EF 70-200  ML: latest Nighly Build + RAW video module. 32GB Sandisk 800x (120 MB/s) card.

haemma

          ************************************************
          *                                                                                            *
          *          DIE FOLGENDEN SCHRITTE SIND GEFÄHRLICH
                       UND KÖNNEN IHRE KAMERA BESCHÄDIGEN.   
          *
          *                 KEINE GARANTIE.  KEINE GARANTIE.                   *
          *                                                                                            *
          ************************************************

Sollten Sie sich bereits beim Lesen dieser Warnung mit dem weiteren Prozedere überfordert fühlen, hören Sie zum Lesen auf und löschen Sie die Software bevor Sie sie zum Laufen bringen.

Bitte lesen Sie die Gebrauchsanleitung sorgfältig bevor Sie die Software installieren.

Falls etwas schief läuft: ENTFERNEN SIE DIE BATTERIE/AKKU AUS DER KAMERA.


------------------------------------------------------------------------------------------------------------------------

Folgende Kameras erlauben RAW Video zum jetzigen Zeitpunkt. (21.05.2013).


Kameras mit CF Kartenslots eignen sich besser zur RAW Aufnahme als solche mit SD Kartenslot. Die RAW Videoaufnahme funktioniert ebenfalls auf Kameras mit SD Kartenslot, dort sind jedoch die Frameraten aufgrund der niedrigeren Übertragungsgeschwindigkeit der SD Controller beschränkt und bewegen sich auf einem Niveau von ca. 30-40MB/s.

5D Mark III: Für die RAW Aufnahme am besten geeignet. 1920x1080 bei 24 und 25fps
5D Mark II: Derzeit noch einige Probleme, Funktion jedoch gegeben bei 1880x840 bei 24fps
7D: Aufgrund der Zweiprozessorenarchitektur funktioniert RAW derzeit noch nicht
6D: Derzeit noch einige Probleme. 1880x840 bei 24fps möglich
600D (T3i): Port noch in Arbeit, 1280x400 bei 24fps derzeit möglich
650D (T4i): Port noch in Arbeit, Möglicherweise 1280x560 bei 24fps möglich
EOS M: Derzeit nicht möglich

Noch interessiert? Hier weiterlesen:

Schrittweise Installation von Magiclantern und Vorbereitende Schritte zur RAW Videoaufnahme:

Installation von Magic Lantern:
500D (T1i), 60D, 600D (T3i), 50D, 500D (T2i), 5D2 und 1100D Installationsanleitung:
http://wiki.magiclantern.fm/install

Für die allerneuesten Features empfehlen sich die ,,Nightly Builds":
http://www.magiclantern.fm/forum/index.php?topic=3072.0


Installationsanleitungen für Magiclantern (Kameraspezifisch, in Englisch)

Installation von Magiclantern auf der 5D Mark III:
http://www.magiclantern.fm/forum/index.php?topic=2602.0

Installation von Magiclantern auf der 7D (Alpha 2)
http://www.magiclantern.fm/forum/index.php?topic=3974.0

Installation von Magiclantern auf der 6D (Development Kit)
http://www.magiclantern.fm/forum/index.php?topic=3904.0

Installation von Magiclantern auf der 650D (Dzt. im Entwicklungsstadium)
http://www.magiclantern.fm/forum/index.php?topic=3697.0

Installation von Magiclantern auf EOS M Kameras (Alpha 1)
http://www.magiclantern.fm/forum/index.php?topic=3648.0

Andere Kameras
http://www.magiclantern.fm/forum/index.php?topic=1009.0

Canon 5D Classic Firmware (Beta 4)
http://www.magiclantern.fm/forum/index.php?topic=1010.0


INSTALLATION – RAW VIDEO

Nach der Installation von Magiclantern und der Durchsicht der vorangegangenen Links sollten Sie mit Magiclantern soweit vertraut sein um RAW Video auf Ihrer DSLR zu ermöglichen.


Die Entwickler von Magiclantern sind stets um Verbesserungen der Software bemüht die Sie nach Kompilierung auf Ihrer Kamera benutzen können.

Sie wissen nun dass es auf Ihrer Speicherkarte mit Magiclantern eine ,,autoexec.bin" Datei gibt. Diese Datei enthält alle Informationen wie sich Ihre Kamera verhalten soll, jedes Update von ML wird die Änderungen in der ,,autoexec.bin" gespeichert haben.

Sollten Sie von einem ML Release auf ein neueres updaten wollen, müssen Sie die bestehende ,,autoexec.bin" durch die neue Datei ersetzen. Bei einer so tiefgreifenden Änderung wie RAW Video müssen jedoch noch weitere Dateien ersetzt/hinzugefügt werden. Diese Dateien befinden sich im ,,Modules" Verzeichnis auf Ihrer Speicherkarte.


Hier sehen Sie die typische Ordnerstruktur einer ML Installation:

Root Ordner:
DCIM (Canon DIR)
MiSC (Canon DIR)
ML (DIR)
autoexec.bin
einige-xxx-bootflag.fir (siehe Sonderfälle)

Die ersten beiden Ordner sind Canon Ordner.

ML ist der Hauptordner für Magic Lantern. Darin befinden sich üblicherweise die folgenden Unterordner:

cropmks (DIR)
data (DIR)
doc (DIR)
LOGS (DIR)
MODULES (DIR)
scripts (DIR)
SETTINGS (DIR)


In unserem Fall müssen noch weitere Dateien im MODULES Ordner ersetzt/eingefügt werden:

magic.sym
raw_rec.mo
raw_rec.o)



ZUSAMMENFASSUNG:
1.   Holen Sie die neuesten Versionen der: autoexec.bin, magic.sym, raw_rec.mo, raw_rec.o
2.   Ersetzen Sie die alten Dateien auf der Karte
3.   Normalerweise ist es von Vorteil die MAGIC.CFG zu löschen da in dieser Datei die Einstellungen gesichert werden.

SONDERFÄLLE:

Auf neueren Kameras gibt es Dateien welche zusätzlich zur "autoexec.bin" genutzt werden:

5D Mark III: Sollten sie ML Alpha 3 + DevKit installiert haben gibt es die Datei ,,5D3-113-bootflag.fir" welche nicht upgedated werden muss.

7D: Sollten sie ML Alpha 2 installiert haben gibt es die Datei MAGIC.FIR (zur Erinnerung: RAW Video funktioniert auf der 7D derzeit noch nicht)

Ein weiterer Weg zum Update ist einfach alle Files welche üblicherweise in einem .zip File zur Verfügung gestellt werden zu ersetzen.


Sollten Sie Programmierskills besitzen besteht die Möglichkeit die Dateien bzw. den Sourcecode selbst zu kompilieren.

Erste Schritte mit der Entwicklung:

Hier:http://www.magiclantern.fm/forum/index.php?topic=991.0
Hier: http://www.magiclantern.fm/forum/index.php?topic=2899.0



Sollten Sie keine Programmierskills besitzen, fragen Sie bitte im MagicLantern Forum nach. (nur nightlyBuilds sind normalerweise unkompiliert)



Die neusten kompilierten Nightly Builds
Hier: http://www.magiclantern.fm/forum/index.php?topic=5413.0

Weitere wichtige Links zum RAW Video:

Um den Programmieren zu helfen wäre es eine gute Idee eventuelle RAW Video Probleme in den dazu bereitstehenden Forenthreads zu besprechen bzw. aufzuzeigen:

Spezifische Forenthreads:

5D3  Uncompressed 14-bit RAW video testing - 5D Mark III
Hier:  http://www.magiclantern.fm/forum/index.php?topic=5473.0

5D2  Raw video on 5DMK2
Hier:  http://www.magiclantern.fm/forum/index.php?topic=5419.0

600D Uncompressed 600D Raw Video
Hier: http://www.magiclantern.fm/forum/index.php?topic=5494.0

6D 6D + Raw thread (mit Installationsanleitung, englisch)
Hier: http://www.magiclantern.fm/forum/index.php?topic=5530.msg37766#msg37766

650D: Derzeit gibt es keinen spezifischen Thread

Weitere nützliche Links

Wie installiere ich Magic Lantern auf einer Canon 5D Mark III
Hier: http://www.magiclantern.fm/forum/index.php?topic=2602.0

Wo become ich die Canon Firmware 1.1.3
Hier: http://pel.hu/eoscard/

Wo become ich bereits kompilierte Nightly Builds
Hier: http://www.magiclantern.fm/forum/index.php?topic=5413.0

Alle Fragen die die Nachbearbeitung von RAW Videos betreffen (jedes Betriebssystem):
Hier: http://www.magiclantern.fm/forum/index.php?topic=5404.0

Alle Fragen bzgl. RAW_REC MODULE Kompilierung/Installation/Nutzung
Hier: http://www.magiclantern.fm/forum/index.php?topic=5405.0

Unterstützte 1000x CF Karten für durchgehende RAW Aufnahme
Hier: http://www.magiclantern.fm/forum/index.php?topic=5391.0

RenatoPhoto

Swweeeeet!  I dont understand a thing!   
Danke    ;D
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Robbe

Quote from: Robbe on May 21, 2013, 01:21:48 PM
Is there a version for 600D? Can only find for 6D, 5D2 and 5D3.
Found 600D files at "Tragic Lantern"? Why Tragic?
But the Modules only have 2 files:MAGIC.SYM (53K), raw_rec.mo (25K)
and the autoexec.bin is only 520K.
//RobBe
Canon 5D MarkII, Canon 600D, EF 14mm, EF 15mm, EF 35-350, EF 70-200  ML: latest Nighly Build + RAW video module. 32GB Sandisk 800x (120 MB/s) card.

RenatoPhoto

Quote from: Robbe on May 21, 2013, 09:44:36 PM
Found 600D files at "Tragic Lantern"? Why Tragic?
But the Modules only have 2 files:MAGIC.SYM (53K), raw_rec.mo (25K)
and the autoexec.bin is only 520K.

I dont know, the developer chose that title.

All looks ok.  I dont know why there is no raw_rec.o but probably dont need it for that camera or it is missing...

May want to ask in:
600D Uncompressed 600D Raw Video
HERE: http://www.magiclantern.fm/forum/index.php?topic=5494.0

All your questions regarding 600D should go there.  Please let me know if it does not need it!
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

RenatoPhoto

Quote from: Robbe on May 21, 2013, 09:44:36 PM
Found 600D files at "Tragic Lantern"? Why Tragic?
But the Modules only have 2 files:MAGIC.SYM (53K), raw_rec.mo (25K)
and the autoexec.bin is only 520K.

Just un update for the links to the latest compiles:

5D3 -- Newest compiled nightly Builds:
HERE: http://www.magiclantern.fm/forum/index.php?topic=5413.0

5D2 -- Builds:
http://www.magiclantern.fm/forum/index.php?topic=5533.msg37819#msg37819

60D -- Compiles & Builds:
https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads

600D -- Compiles & Builds Builds:
https://bitbucket.org/OtherOnePercent/tragic-lantern-2.0/downloads
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Robbe

Thanks a lot for all your help!
No problems to replace autoexec.bin and copy the Module folder with 2 files into ML folder. I used 600D -- Compiles & Builds Builds.
Some try and error to get raw_rec in function, but it worked! Have to test settings for my SanDisk Extreme 32GB SDHC 30MB/s. So fare I got plenty of buffer errors.
I have to say that it's absolute fantastic the way Magic Lantern extend Canon cameras potential!
And it's even more remarkable that Canon seems to ignore this amazing opportunity!!
//RobBe
Canon 5D MarkII, Canon 600D, EF 14mm, EF 15mm, EF 35-350, EF 70-200  ML: latest Nighly Build + RAW video module. 32GB Sandisk 800x (120 MB/s) card.

budafilms

Renato, in the last build May 25, we don´t have tha resolution option as May 22 (1920 x 720, etc) can we have again that? was the optimal for us. Thanks.

keith.uk

Quote from: RenatoPhoto on May 22, 2013, 02:56:45 PM
Just un update for the links to the latest compiles:
/index.php?topic=5533.msg37819#msg37819

60D -- Compiles & Builds:
https://bitbucket.org/OtherOnePercent/tragic-lantern-6d/downloads


Just a note that the heading for the above link refers to the 60D but the link is for the 6D. Also, it might be worth while adding something from this thread into the first post-- in the section which summarises the current state of play for each of the newer cameras.

RenatoPhoto

http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X



hjfilmspeed

I have a 5d3. so with the nightly builds, should i be running ml from sd card while recording on compac flash?

Also how do you completely uninstall nightly builds from 5d3?

RenatoPhoto

Quote from: hjfilmspeed on June 03, 2013, 06:31:35 AM
I have a 5d3. so with the nightly builds, should i be running ml from sd card while recording on compac flash?

Yes
Quote from: hjfilmspeed on June 03, 2013, 06:31:35 AM
Also how do you completely uninstall nightly builds from 5d3?

You cant yet! 

How do disable Bootdisk flag on a 5D Mk III
http://www.magiclantern.fm/forum/index.php?topic=6035.msg45325;topicseen#msg45325
http://www.pululahuahostal.com  |  EF 300 f/4, EF 100-400 L, EF 180 L, EF-S 10-22, Samyang 14mm, Sigma 28mm EX DG, Sigma 8mm 1:3.5 EX DG, EF 50mm 1:1.8 II, EF 1.4X II, Kenko C-AF 2X

Dugdale

For those that are interested I also made a "tutorial" of me installing ML raw on my 5D3 for the first time which is a little different from his video because he already had ML installed.

Hope it helps someone:
http://www.learningdslrvideo.com/magic-lantern-raw-5d-mark-iii/

I figured out how to get past the 4GB limit, now I have figure out why it shuts off after 2:00 of recording or 9.7GB. I figured out that I need to disable power off after 2 minutes in the main menu.