Author Topic: [UNBRICKED] Bricked 60D Err 70  (Read 77993 times)

fryedr1c3

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #100 on: July 18, 2015, 12:16:34 AM »
Hello,

Also having a similar problem as others. Using a Canon 7D, camera will boot in "C" modes, but will automatically display Err 70 if changed to other modes. Problem came about when trying to change the file format to save in .crw when it was connected to my computer in one of the other modes. Thank you for any advice or help with this issue.


Here are the Crash and Log Files
Crash:

ASSERT: FALSE
at DevelopCombination.c:52, task RscMgr
lv:0 mode:0




Magic Lantern version : Nightly.2015Jul02.7D203
Mercurial changeset   : bcd2d84120a5 (unified) tip
Built on 2015-07-01 22:30:47 UTC by [email protected].
Free Memory  : 258K + 2961K




Log:
http://pastebin.com/k7npUFUf

JFG

  • New to the forum
  • *
  • Posts: 5
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #101 on: August 18, 2015, 03:23:04 PM »
Hi everybody,

I have been having the same issue with my 60d. I have seen on this forum that similar situations were successfully resolved. This gives me hope. My problem is almost exactly the same than the one documented by other users:

1) The camera got wet and since that, I kept having Err 70.

2) Most of the time (this is not consistent), I am able to open it in C mode after having removed the battery. This works with only one of my lens (EF-S 55-250 IS). When it does, everything is functional: each control beside de “mode wheel” is responding, autofocus works, it can take a picture and menu can be accessed flawlessly. This was tried using different lens, card and battery. From my point of view, this suggests that this is not a hardware issue although I can’t be 100% sure (camera was ON what it got wet).

3) Iwas able to upgrade the firmware to 1.1.1 however after the incident. However; I have not been able to open the camera with a SD card mounted for a few days. This fact given, I was unable to install Magic Lantern in order to get a crash log (yet) but I’ll continue trying it since I am aware that this log could help diagnose the problem.
I tried resetting the picture parameters using gphoto2 by following the previously shared instructions. The software was successfully installed but the procedure did not give any results.

Of course, any help in resolving this situation would be appreciated. From what I understand, the camera can be rebooted by using a modified autoexec and this would allow me the clear camera settings. If this is the way to go, I am wondering if someone could please share with me the modified autoexec and some basics instructions.

Please let me know if more information is required.

Thanks in advance,

JFG
[email protected]

Dahoward

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #102 on: September 22, 2015, 06:56:40 PM »
Hey yall I have similar issues except I cannot get to the menu screen.  Changed batteries, sd card, and even used different batteries/cards.  Camera got a lil wet, still turns on n off easy n gives me the good ole error 70.  I read the forum but I'll make it simple, I'm not to tech savvy with still cameras. 


Gusto

  • Just arrived
  • *
  • Posts: 2
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #104 on: March 08, 2016, 04:47:11 AM »
Please help.. i have same err 70 too and i already installed magic lantern.

ASSERT: 0

at Evf/EvfState.c :1190

mic32

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #105 on: August 28, 2016, 04:38:20 AM »
Hello Alex,

for me now is near the same issue with 60D +  Err 70
Get error when camera was become slightly wet in backpack after longer rain.

Today on the beginn the camera was able to boot in C-mode WITHOUT ML-SD-Card.
I updated canon-firmware from 1.1.1 to 1.1.1 again without errors and "err 70" was still showing me after fir-update ith ability to load in C-mode,
then i downloaded the nightly build of ML for 60D and after i tryed to update to ML-firware, camera show me just only "Err 70"-message in all modes (C-mode too) and only with ML-SD-Card.

I need autoexec.bin with disabled assert handler to reset the settings.

Thank you in advance.

So here is LOG000.LOG for more details:
     86:   140.552 [JOB] PROP_CFN_TAB2 3 0
     87:   140.834 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     88:   140.914 [STARTUP] ERROR ASSERT : Line 108
     89:   140.964 [STARTUP] ERROR ASSERT : FALSE
     90:   141.046 [STARTUP] ASSERT Time 1899/12/31 0:0:0 

Code: [Select]
Sun Aug 28 00:11:48 2016
      0:    11.807 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.875 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.221 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.491 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    14.241 [SEQ] seqEventDispatch (Startup, 0)
      5:    14.274 [STARTUP] startupEntry
      6:    52.343 [PROPST] Initialize Adjective & Situation
      7:    52.724 [HPD] # 1 0 1
      8:    56.299 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    56.712 [PROPST] AEMode New:2 Last:0
     10:    56.810 [PROPST] Active Adjective & Situation
     11:    56.931 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    56.971 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    57.054 [PROPST] Not ExecMultiConvert : Situation 0
     14:    57.117 [PROPST]  CurrentAdjective 0 0
     15:    58.697 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x2)
     16:    59.789 [PROPST] AEMode New:2 Last:2
     17:    60.649 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     18:    62.279 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     19:    62.505 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     20:    64.021 [PRP] MovieParamData
     21:    64.268 [PRP] mode 0 size 0x22 , framerate 0x0 , type 0x0 zoom 0x0
     22:    67.016 [PROPST] AEMode New:7 Last:2
     23:    67.078 [PROPST] FromSaveTimming = 2(489)
     24:    71.795 [HPD] CreateTask Master End
     25:    73.356 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     26:    73.517 [EM] emSlaveChangeCBR : UILOCK (0x0)
     27:    74.035 [HPD] ERASE SW OFF
     28:   112.424 [PRP] MovieParamData
     29:   112.749 [PRP] mode 0 size 0x0 , framerate 0x19 , type 0xc zoom 0x0
     30:   118.605 [STARTUP] startupPropAdminMain : End
     31:   118.693 [SEQ] NotifyComplete (Cur = 1, 0x20000000, Flag = 0x20000000)
     32:   118.791 [SEQ] seqEventDispatch (Startup, 1)
     33:   118.824 [STARTUP] startupPrepareProperty
     34:   119.251 [FM] FM_Initialize (0, 1, 0)
     35:   119.676 [FM] fmResultCBR (0x80e408)
     36:   120.648 [FM] PROP_HDD_DCIM_PATH (/)
     37:   120.872 [FC] FC_Initialize [drive:3][ClassID:39]
     38:   121.120 [FM] PROP_CARD1_STATUS = 0x1
     39:   121.256 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     40:   121.368 [FM] PROP_CARD1_FILE_NUMBER = 0
     41:   121.526 [FM] PROP_CARD2_STATUS = 0x0
     42:   121.637 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     43:   121.750 [FM] PROP_CARD2_FILE_NUMBER = 8524
     44:   121.873 [FM] PROP_CARD3_EXIST = 0
     45:   121.936 [FM] PROP_CARD3_STATUS = 0x1
     46:   122.002 [FM] PROP_CARD3_RECORD = 0 => 1
     47:   122.062 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     48:   122.155 [FM] PROP_CARD3_FILE_NUMBER = 0
     49:   122.290 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     50:   122.357 [FM] PROP_CARD_EXTENSION = 0
     51:   122.421 [FM] PROP_CURRENT_MEDIA = 2
     52:   122.481 [FM] PROP_USBDEVICE_CONNECT = -1
     53:   122.552 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 8524
     54:   122.591 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     55:   122.721 [FM] PROP_DSDEFINE ModelId 80000287
     56:   122.807 [SEQ] seqEventDispatch (Startup, 2)
     57:   122.833 [STARTUP] startupPrepareCapture
     58:   123.467 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     59:   125.147 [RSC] AllocateMemoryUnit For ExMem1
     60:   125.175 [RSC] AllocateMemoryUnit For ExMem1_2
     61:   125.195 [RSC] AllocateMemoryUnit For OnlyMem1
     62:   126.460 [RSC] MemMgr(IMAGE) 0 2
     63:   126.490 [RSC] MemMgr(IMAGE) 0 0
     64:   126.516 [RSC] MemMgr(IMAGE) 0 7
     65:   126.539 [RSC] MemMgr(IMAGE) 0 0
     66:   126.605 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     67:   126.623 [RSC] Deliver PROP_MEMORY_STATUS 3
     68:   128.011 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     69:   128.063 [RSC] hExMem1_2StateObject Through Event 0 State 0
     70:   128.793 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     71:   128.828 [RSC] hExMem1_2StateObject Through Event 4 State 0
     72:   129.615 [RSC] this->dwCardStatus[0] = 0x1(552)
     73:   130.362 [RSC] this->dwCardStatus[1] = 0x0(552)
     74:   131.092 [RSC] this->dwCardStatus[2] = 0x1(552)
     75:   131.804 [RSC] PROP_PC_HDD_STATUS = 0x1
     76:   132.722 [RSC] NO IMAGEFORMAT EstimatedSize.c 0
     77:   132.754 [RSC] NO IMAGEFORMAT EstimatedSize.c 0
     78:   132.791 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     79:   133.916 [RTC] !! RTC CHECK ERROR !!

     80:   138.045 [PRP] Deliv WaitID = 0x8000003F, 0xFF02BE84(1)
     81:   138.278 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     82:   138.494 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     83:   138.699 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     84:   140.000 [JOB] InitializeJobClass (ID = 9699, Num = 17)
     85:   140.283 [JOB] [BIND] dcsResultCBR (0x931ba4)
     86:   140.552 [JOB] PROP_CFN_TAB2 3 0
     87:   140.834 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     88:   140.914 [STARTUP] ERROR ASSERT : Line 108
     89:   140.964 [STARTUP] ERROR ASSERT : FALSE
     90:   141.046 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     91:   141.547 [PRP] propRegisterSlave 0x8000003F

     92:   144.120 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     93:   144.244 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     94:   144.520 [PRP] Complete WaitID = 0x8000003F, 0xFF02A10C(1)
     95:   144.846 [CERES]  RegisterGPSInfoCallback
     96:   145.555 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     97:   146.825 [JOB] InitializeInnerDevelopJobClass (ID = 9699, Num = 16)
     98:   146.868 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     99:   148.315 [SND] Seq LPC 5-0
    100:   148.362 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
    101:   148.402 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
    102:   148.415 [SND] Seq LPC 5-1
    103:   148.520 [SND] Seq LPC 5-2
    104:   148.592 [SND] Seq LPC 5-3
    105:   148.619 [SND] Seq LPC 5-4
    106:   148.633 [SND] Seq LPC 5-5
    107:   148.673 [SND] Seq LPC 5-6
    108:   149.075 [SND] Seq LPC 5-7
    109:   149.093 [SND] Seq LPC fin
    110:   151.546 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    111:   151.764 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    112:   152.011 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    113:   152.221 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    114:   152.432 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    115:   152.634 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    116:   152.835 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    117:   153.043 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    118:   153.244 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    119:   153.449 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    120:   153.656 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    121:   153.862 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    122:   154.080 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    123:   154.321 [SHTC] scsInit
    124:   155.430 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    125:   162.008 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    126:   162.232 [SHTB] sbsInit
    127:   162.482 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    128:   163.294 [SHTP] spsInit
    129:   163.401 [FM] FM_RegisterSpaceNotifyCallback
    130:   163.575 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    131:   163.615 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    132:   163.674 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    133:   163.712 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    134:   163.768 [FM] FM_RegisterSpaceNotifyCallback
    135:   164.035 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    136:   164.192 [WFT]  TOM_Initialize
    137:   165.015 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    138:   165.257 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    139:   165.475 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    140:   166.243 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    141:   166.474 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    142:   166.519 [EM] Already SW1OFF
    143:   166.664 [MC] cam event metering timer start
    144:   166.869 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    145:   167.076 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    146:   167.283 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    147:   167.496 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    148:   167.718 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    149:   167.934 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    150:   168.150 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    151:   168.905 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    152:   169.039 [TA10] TA10_Initialize : Start
    153:   169.640 [TA10] TA10S_Initialize : Start
    154:   169.678 [TA10] TA10S_Initialize : CreateStageClass
    155:   169.991 [TA10] TA10S_Initialize : End
    156:   170.168 [TA10] TA10_Initialize : End
    157:   170.315 [FM] fmInitialized
    158:   170.424 [FC] _FC_SetDirSuffix (CANON)
    159:   170.602 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 8524)
    160:   170.765 [FM] fmPrepare
    161:   172.826 [FM] ALV_Initialize (36, 25)
    162:   173.207 [FM] fmAllocDcfNo(0x80e1c4)(0x0)
    163:   176.831 [TERM] terminateChangeCBR : SHUTDOWN (255)
    164:   176.864 [TERMINATE] SHUTDOWN init comp
    165:   177.027 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    166:   177.073 [TERMINATE] Abort init comp
    167:   177.480 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    168:   179.365 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    169:   179.643 [MC] DisplaySensor : 1(0)
    170:   180.410 [MC] PROP_GUI_STATE 0
    171:   180.657 [MC] PROP_LV_ACTION : LV_STOP
    172:   180.807 [MC] PROP_LV_DISPBUSY : not Busy
    173:   181.013 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    174:   181.171 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    175:   181.626 [MC] JobState 0
    176:   182.693 [MC] QRTime : 2
    177:   183.261 [MC] PROP_VARIANGLE_GUICTRL : Enable
    178:   183.683 [MC] regist master CardCover
    179:   184.770 [PRP] propRegisterSlave 0x8000003F

    180:   185.008 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
    181:   186.213 [MC] GuiGroundState : 0
    182:   186.687 [MC] PROP_LV_ACTION : LV_STOP
    183:   187.433 [PRP] Complete WaitID = 0x8000003F, 0xFF080794(1)
    184:   187.708 [MC] Disp Error : 70

syifaa diding

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #106 on: December 05, 2016, 09:38:54 PM »
Dear ALEX, I need help with my Canon 60D camera. The screen shows an error 70, told to turn off and turn on the camera and reinsert the battery. The only way this works is in C, and even then I had to wear full auto mode used to initiate the turn on the camera, half Shuter Biltz open up new switch to the c in order to light up. after burning in the on mode can only be used in that fashion, I try switching to another mode will reappear on the mode c error 70. I have successfully installed the ML, but to turn on the camera is still the same. there are reports of "Crash" in the memory card containing: assert: FALSE
at DevelopCombination.c: 108, task RscMgr
lv: 0 mode: 0


Magic Lantern version: Nightly.2016Nov17.60D111
Mercurial changeset: d5e2cc0b6743 (unified) tip
Built on 2016-11-16 23:14:18 UTC by Jenkins @ nightly.
Free Memory: 390K + 1872K

my email : [email protected]

denejka

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #107 on: December 13, 2016, 07:39:54 PM »
Have my bricked 500D (water damaged but it worked fine). Seeing ERROR70 on boot.
I can't have the log files, 'cus I didn't had ML installed (JUST DELETED IT BEFORE THE "DEATH" sadly)
Can I please get some heeeelp?
Using firmware (1.1.1) / Don't have ML (deleted it before death, fu...)
Tried:
1) Booting up in all modes - no effect
2) Changed battery - brighter sd light :)
3) Changed lenses - no effect
4) Formated SD card - no effect

Can I somehow forceinstall ML without going into menu and have autoexec with disabled assert handler?

It's sad that I can't even see logs or get into menu → settings → reset to factory settings
What should I do? Please somebody help me! :C

email: [email protected]


aiminli

  • Just arrived
  • *
  • Posts: 1
Re: [UNBRICKED] Bricked 60D Err 70
« Reply #109 on: August 10, 2017, 10:00:15 PM »
Hello,

My Canon 60D has a similar problem like others. The camera worked fine until it was stored in a wet camera bag after which the error 70 prevented using it. It displays error 70 on all shooting modes except the "C"/"CA" trick. First I have to turn the shooting mode to "CA" , power on then power off, change shooting mode to "C" and power on. I was wondering if someone could give me a modified autoexec.bin with disabled assert handler to unbrick the camera. The crash log file is as follows:

ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0

RscMgr stack: 115e68 [115f90-114f90]
0xUNKNOWN  @ ff07b8cc:115f88
0xUNKNOWN  @ ff1dcb80:115f60
0xFF1DC5DC @ ff02c3fc:115f28
0xUNKNOWN  @ ff1dc60c:115f18
0xUNKNOWN  @ ff1dc694:115ef8
0xFF0CAE58 @ ff0c992c:115ec0
0xFF013EC0 @ ff0caf18:115ea0
0x1FE00368 @ 1fe006d0:115e68

Magic Lantern version : Nightly.2017Aug07.60D111
Mercurial changeset   : ff6f36e11acb (unified) tip
Built on 2017-08-06 22:14:23 UTC by [email protected]
Free Memory  : 390K + 1920K

My Canon firmware version is 1.1.1.
Email: [email protected]
Thanks.

The log002.log is as follows:

Code: [Select]
Wed Aug  9 18:07:49 2017
      0:    11.809 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.875 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.221 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.488 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    14.252 [SEQ] seqEventDispatch (Startup, 0)
      5:    14.279 [STARTUP] startupEntry
      6:    52.611 [PROPST] Initialize Adjective & Situation
      7:    53.010 [HPD] # 1 0 1
      8:    56.499 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    56.903 [PROPST] AEMode New:0 Last:0
     10:    57.000 [PROPST] Active Adjective & Situation
     11:    57.118 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    57.156 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    57.246 [PROPST] Not ExecMultiConvert : Situation 0
     14:    57.316 [PROPST]  CurrentAdjective 0 0
     15:    58.849 [HPD] CreateTask Master End
     16:    60.513 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    60.673 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    61.160 [HPD] ERASE SW OFF
     19:   111.029 [STARTUP] startupPropAdminMain : End
     20:   111.107 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   155.773 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   156.353 [PROPST] AEMode New:0 Last:0
     23:   156.779 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   157.551 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   157.628 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   158.173 [SEQ] seqEventDispatch (Startup, 1)
     27:   158.211 [STARTUP] startupPrepareProperty
     28:   158.374 [PRP] MovieParamData
     29:   158.513 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
     30:   161.355 [FM] FM_Initialize (0, 1, 0)
     31:   161.906 [FM] fmResultCBR (0x80e4a4)
     32:   163.177 [FM] PROP_HDD_DCIM_PATH (/)
     33:   163.789 [PROPST] AEMode New:2 Last:0
     34:   164.170 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     35:   164.427 [FC] FC_Initialize [drive:3][ClassID:39]
     36:   164.783 [FM] PROP_CARD1_STATUS = 0x1
     37:   164.923 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     38:   165.025 [FM] PROP_CARD1_FILE_NUMBER = 0
     39:   165.179 [FM] PROP_CARD2_STATUS = 0x1
     40:   165.280 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     41:   165.391 [FM] PROP_CARD2_FILE_NUMBER = 3268
     42:   165.513 [FM] PROP_CARD3_EXIST = 0
     43:   165.571 [FM] PROP_CARD3_STATUS = 0x1
     44:   165.637 [FM] PROP_CARD3_RECORD = 0 => 0
     45:   165.700 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     46:   165.789 [FM] PROP_CARD3_FILE_NUMBER = 0
     47:   165.904 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     48:   165.976 [FM] PROP_CARD_EXTENSION = 132
     49:   166.043 [FM] PROP_CURRENT_MEDIA = 2
     50:   166.111 [FM] PROP_USBDEVICE_CONNECT = -1
     51:   166.183 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 3268
     52:   166.223 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     53:   166.356 [FM] PROP_DSDEFINE ModelId 80000287
     54:   166.445 [SEQ] seqEventDispatch (Startup, 2)
     55:   166.469 [STARTUP] startupPrepareCapture
     56:   167.135 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     57:   168.880 [RSC] AllocateMemoryUnit For ExMem1
     58:   168.905 [RSC] AllocateMemoryUnit For ExMem1_2
     59:   168.924 [RSC] AllocateMemoryUnit For OnlyMem1
     60:   170.211 [RSC] MemMgr(IMAGE) 0 2
     61:   170.252 [RSC] MemMgr(IMAGE) 0 0
     62:   170.279 [RSC] MemMgr(IMAGE) 0 7
     63:   170.303 [RSC] MemMgr(IMAGE) 0 0
     64:   170.370 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     65:   170.391 [RSC] Deliver PROP_MEMORY_STATUS 3
     66:   170.932 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     67:   170.970 [RSC] hExMem1_2StateObject Through Event 0 State 0
     68:   171.587 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     69:   171.617 [RSC] hExMem1_2StateObject Through Event 4 State 0
     70:   172.365 [RSC] this->dwCardStatus[0] = 0x1(552)
     71:   173.096 [RSC] this->dwCardStatus[1] = 0x1(552)
     72:   173.806 [RSC] this->dwCardStatus[2] = 0x1(552)
     73:   174.522 [RSC] PROP_PC_HDD_STATUS = 0x1
     74:   175.485 [RSC] NO IMAGEFORMAT EstimatedSize.c 10
     75:   175.519 [RSC] NO IMAGEFORMAT EstimatedSize.c 10
     76:   175.555 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     77:   176.744 [RTC] !! RTC CHECK ERROR !!

     78:   179.916 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     79:   180.150 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     80:   180.357 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     81:   181.563 [JOB] InitializeJobClass (ID = 25253, Num = 17)
     82:   181.888 [JOB] [BIND] dcsResultCBR (0x931b20)
     83:   182.155 [JOB] PROP_CFN_TAB2 10 10
     84:   183.694 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     85:   183.780 [STARTUP] ERROR ASSERT : Line 108
     86:   183.828 [STARTUP] ERROR ASSERT : FALSE
     87:   183.917 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     88:   185.346 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     89:   185.476 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     90:   185.928 [CERES]  RegisterGPSInfoCallback
     91:   186.653 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     92:   187.924 [JOB] InitializeInnerDevelopJobClass (ID = 25253, Num = 16)
     93:   187.996 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     94:   189.526 [SND] Seq LPC 5-0
     95:   189.571 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     96:   189.609 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
     97:   189.621 [SND] Seq LPC 5-1
     98:   189.677 [SND] Seq LPC 5-2
     99:   189.720 [SND] Seq LPC 5-3
    100:   189.773 [SND] Seq LPC 5-4
    101:   189.786 [SND] Seq LPC 5-5
    102:   189.798 [SND] Seq LPC 5-6
    103:   190.206 [SND] Seq LPC 5-7
    104:   190.220 [SND] Seq LPC fin
    105:   192.219 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    106:   192.400 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    107:   192.659 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147