Author Topic: Canon 1200D  (Read 192785 times)

Torkie

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #425 on: February 24, 2017, 09:42:43 PM »
I have done some more testing

I performed the API test in LUA, and have the output attached.
The  battery stuff could be caused because I have the camera on a powersupply

The selftest.mo was not among the modules. I have built ML from the 1200D branch, and the selftest.mo was included.
Enabling it gives an error on booting the camera:
Code: [Select]
Scanning modules...
Load modules...
  [i] load: SELFTEST.MO
linking..
tcc: error: undefined symbol 'bv_toggle'
  [E] failed to link modules

Also enabling other modules in my own build gave errors while loading them.



Code: [Select]

===============================================================================
ML/SCRIPTS/API_TEST.LUA - 2017-2-24 22:22:25
===============================================================================

Strict mode tests...
Strict mode tests passed.

Generic tests...
arg = table:
  [0] = "API_TEST.LUA"
camera = table:
  shutter = table:
    raw = 0
    apex = -7.
    ms = 0
    value = 0
  aperture = table:
    raw = 75
    apex = 8.374999
    value = 18.2
    min = table:
      raw = 45
      apex = 4.624999
      value = 4.9
    max = table:
      raw = 88
      apex = 10
      value = 32
  iso = table:
    raw = 0
    apex = -4
    value = 0
  ec = table:
    raw = 0
    value = 0
  flash_ec = table:
    raw = 0
    value = 0
  kelvin = 5200
  mode = 0
  metering_mode = 3
  drive_mode = 0
  model = "Canon EOS 1200D"
  model_short = "1200D"
  firmware = "1.0.1"
  temperature = 165
  state = 0
  reboot = function: p
  burst = function: p
  shoot = function: p
  bulb = function: p
event = table:
  pre_shoot = nil
  post_shoot = nil
  shoot_task = nil
  seconds_clock = nil
  keypress = nil
  custom_picture_taking = nil
  intervalometer = nil
  config_save = nil
console = table:
  hide = function: p
  write = function: p
  show = function: p
  clear = function: p
lv = table:
  enabled = false
  paused = false
  running = false
  zoom = 1
  wait = function: p
  info = function: p
  resume = function: p
  stop = function: p
  start = function: p
  pause = function: p
lens = table:
  name = "EF-S18-55mm f/3.5-5.6 III"
  focal_length = 0
  focus_distance = 14080
  hyperfocal = 0
  dof_near = 0
  dof_far = 0
  af = false
  af_mode = 771
  focus = function: p
  autofocus = function: p
display = table:
  idle = true
  height = 480
  width = 720
  pixel = function: p
  print = function: p
  notify_box = function: p
  rect = function: p
  screenshot = function: p
  draw = function: p
  load = function: p
  circle = function: p
  on = function: p
  off = function: p
  line = function: p
  clear = function: p
key = table:
  last = 10
  wait = function: p
  press = function: p
menu = table:
  visible = false
  close = function: p
  set = function: p
  open = function: p
  new = function: p
  block = function: p
  get = function: p
movie = table:
  recording = false
  start = function: p
  stop = function: p
dryos = table:
  clock = 39
  ms_clock = 39453
  prefix = "IMG_"
  dcim_dir = table:
    exists = true
    create = function: p
    children = function: p
    files = function: p
    parent = table:
      exists = true
      create = function: p
      children = function: p
      files = function: p
      parent = table:
        exists = true
        create = function: p
        children = function: p
        files = function: p
        parent = nil
        path = "B:/"
      path = "B:/DCIM/"
    path = "B:/DCIM/100CANON/"
  config_dir = table:
    exists = true
    create = function: p
    children = function: p
    files = function: p
    parent = table:
      exists = true
      create = function: p
      children = function: p
      files = function: p
      parent = table:
        exists = true
        create = function: p
        children = function: p
        files = function: p
        parent = nil
        path = "B:/"
      path = "ML/"
    path = "ML/SETTINGS/"
  ml_card = table:
    cluster_size = 32768
    drive_letter = "B"
    file_number = 84
    folder_number = 100
    free_space = 14400608
    type = "SD"
    _card_ptr = userdata
    path = "B:/"
  shooting_card = table:
    cluster_size = 32768
    drive_letter = "B"
    file_number = 84
    folder_number = 100
    free_space = 14400608
    type = "SD"
    _card_ptr = userdata
    path = "B:/"
  date = table:
    yday = 55
    wday = 6
    isdst = false
    day = 24
    month = 2
    year = 2017
    hour = 22
    sec = 27
    min = 22
  rename = function: p
  call = function: p
  directory = function: p
  remove = function: p
interval = table:
  time = 10
  count = 0
  running = false
  stop = function: p
battery = table:
function not available on this camera
stack traceback:
[C]: in ?
[C]: in for iterator 'for iterator'
ML/SCRIPTS/LIB/logger.lua:125: in function 'logger.serialize'
ML/SCRIPTS/API_TEST.LUA:32: in function <ML/SCRIPTS/API_TEST.LUA:31>
[C]: in function 'globals.xpcall'
ML/SCRIPTS/API_TEST.LUA:31: in function 'globals.print_table'
ML/SCRIPTS/API_TEST.LUA:77: in function 'globals.generic_tests'
ML/SCRIPTS/API_TEST.LUA:832: in function 'globals.api_tests'
ML/SCRIPTS/API_TEST.LUA:855: in main chunktask = table:
  create = function: p
  yield = function: p
property = table:
Generic tests completed.

Module tests...
Testing file I/O...
Copy test: autoexec.bin -> tmp.bin
Copy test OK
Append test: tmp.txt
Append test OK
Rename test: apple.txt -> banana.txt
Rename test OK
Rename test: apple.txt -> ML/banana.txt
Rename test OK
File I/O tests completed.

Testing half-shutter...
half-shutter...





Greg

  • Hero Member
  • *****
  • Posts: 550
Re: Canon 1200D
« Reply #426 on: February 25, 2017, 12:46:39 AM »
platform/1200D.101/internals.h

Code: [Select]
/** Properties are persistent (saved in NVRAM) => a mistake can cause permanent damage. Undefine this for new ports. */
#undef CONFIG_PROP_REQUEST_CHANGE

I do not know at what stage is the port 1200D.
If you are going to define it, you must know what you're doing.

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #427 on: February 25, 2017, 10:26:44 AM »
The camera appears very similar to 60D, so it's probably safe to enable.

Best way to try:
- make sure you have a backup of your ROM (just in case)
- enable it
- exercise all the new functions (in particular, grep the source code for prop_request_change to see which ones use this feature)

That way, if anything goes wrong (unlikely), there won't be too many cameras bricked at once.

Torkie

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #428 on: February 26, 2017, 08:44:55 PM »
I managed to compile ML for the 1200D properly, and now excluded the part of the selftest module that exercised the bv_toggle function.

I can execute the stubs test, it produces a log which I have added below.

In the end it says: Test complete. 4401 passed, 1 failed.

I also ran the quick test, that seemed to run without problems.


Code: [Select]
[Pass] is_play_mode() => 0x1
[Pass] f = FIO_CreateFile("test.dat") => 0x3
[Pass] FIO_WriteFile(f, (void*)0xFF000000, 0x10000) => 0x10000
[Pass] FIO_WriteFile(f, (void*)0xFF000000, 0x10000) => 0x10000
       FIO_CloseFile(f)
[Pass] FIO_GetFileSize("test.dat", &size) => 0x0
[Pass] size => 0x20000
[Pass] p = (void*)_alloc_dma_memory(0x20000) => 0x40997048
[Pass] f = FIO_OpenFile("test.dat", O_RDONLY | O_SYNC) => 0x3
[Pass] FIO_ReadFile(f, p, 0x20000) => 0x20000
       FIO_CloseFile(f)
       _free_dma_memory(p)
[Pass] count => 0x3a98
[Pass] buf = fio_malloc(0x1000000) => 0x423680d4
[Pass] FIO_GetFileSize_direct("test.dat") => 0x82000000
[Pass] f = FIO_OpenFile("test.dat", O_RDWR | O_SYNC) => 0x3
[Pass] FIO_SeekSkipFile(f, 0, SEEK_END) => 0x82000000
[Pass] FIO_WriteFile(f, buf, 0x10) => 0x10
[Pass] FIO_SeekSkipFile(f, -0x20, SEEK_END) => 0x81fffff0
[Pass] FIO_WriteFile(f, buf, 0x30) => 0x30
[Pass] FIO_SeekSkipFile(f, 0x20, SEEK_SET) => 0x20
[Pass] FIO_SeekSkipFile(f, 0x30, SEEK_CUR) => 0x50
[Pass] FIO_SeekSkipFile(f, -0x20, SEEK_CUR) => 0x30
[Pass] FIO_GetFileSize_direct("test.dat") => 0x82000020
[Pass] FIO_RemoveFile("test.dat") => 0x0
[Pass] SetTimerAfter(0, timer_cbr, overrun_cbr, 0) => 0x15
[Pass] timer_func => 0x2
[Pass] SetTimerAfter(1000, timer_cbr, overrun_cbr, 0) => 0x2268
       msleep(900)
[Pass] timer_func => 0x0
       msleep(200)
[Pass] timer_func => 0x1
[Pass] ABS((timer_time/1000 - t0) - 1000) => 0x9
[Pass] ABS((timer_arg - ta0) - 1000) => 0xa
[Pass] timer = SetTimerAfter(1000, timer_cbr, overrun_cbr, 0) => 0x226a
       msleep(400)
       CancelTimer(timer)
[Pass] timer_func => 0x0
       msleep(1500)
[Pass] timer_func => 0x0
[Pass] SetHPTimerAfterNow(0, timer_cbr, overrun_cbr, 0) => 0x15
[Pass] timer_func => 0x2
[Pass] SetHPTimerAfterNow(100000, timer_cbr, overrun_cbr, 0) => 0x258
       msleep(90)
[Pass] timer_func => 0x0
       msleep(20)
[Pass] timer_func => 0x1
[Pass] ABS(DeltaT(timer_time, t0) - 100000) => 0x13d
[Pass] ABS(DeltaT(timer_arg, ta0) - 100000) => 0xf8
[Pass] ABS((get_us_clock_value() - t0) - 110000) => 0xffffff8b
[Pass] SetHPTimerAfterNow(90000, next_tick_cbr, overrun_cbr, 0) => 0x25a
       msleep(80)
[Pass] timer_func => 0x0
       msleep(20)
[Pass] timer_func => 0x3
       msleep(80)
[Pass] timer_func => 0x3
       msleep(20)
[Pass] timer_func => 0x1
[Pass] ABS(DeltaT(timer_time, t0) - 300000) => 0x53
[Pass] ABS(DeltaT(timer_arg, ta0) - 300000) => 0xe
[Pass] ABS((get_us_clock_value() - t0) - 310000) => 0xffffff22
       t0 = *(uint32_t*)0xC0242014 => 0x2e1d5
       msleep(250)
       t1 = *(uint32_t*)0xC0242014 => 0x6b235
[Pass] ABS(MOD(t1-t0, 1048576)/1000 - 250) => 0x1
       LoadCalendarFromRTC( &now )
       s0 = now.tm_sec => 0x35
       Date/time: 2017/02/26 19:49:53
       msleep(1500)
       LoadCalendarFromRTC( &now )
       s1 = now.tm_sec => 0x37
[Pass] MOD(s1-s0, 60) => 0x2
[Pass] MOD(s1-s0, 60) => 0x2
       m0 = MALLOC_FREE_MEMORY => 0x3dee8
[Pass] p = (void*)_malloc(50*1024) => 0xc6f28
[Pass] CACHEABLE(p) => 0xc6f28
       m1 = MALLOC_FREE_MEMORY => 0x316d8
       _free(p)
       m2 = MALLOC_FREE_MEMORY => 0x3dee8
[Pass] ABS((m0-m1) - 50*1024) => 0x10
[Pass] ABS(m0-m2) => 0x0
       m0 = GetFreeMemForAllocateMemory() => 0x141bcc
[Pass] p = (void*)_AllocateMemory(256*1024) => 0xba7fb4
[Pass] CACHEABLE(p) => 0xba7fb4
       m1 = GetFreeMemForAllocateMemory() => 0x101bbc
       _FreeMemory(p)
       m2 = GetFreeMemForAllocateMemory() => 0x141bcc
[Pass] ABS((m0-m1) - 256*1024) => 0x10
[Pass] ABS(m0-m2) => 0x0
       m01 = MALLOC_FREE_MEMORY => 0x3dee8
       m02 = GetFreeMemForAllocateMemory() => 0x141bcc
[Pass] p = (void*)_alloc_dma_memory(256*1024) => 0x40ba7ff4
[Pass] UNCACHEABLE(p) => 0x40ba7ff4
[Pass] CACHEABLE(p) => 0xba7ff4
[Pass] UNCACHEABLE(CACHEABLE(p)) => 0x40ba7ff4
       _free_dma_memory(p)
[Pass] p = (void*)_shoot_malloc(24*1024*1024) => 0x423680b4
[Pass] UNCACHEABLE(p) => 0x423680b4
       _shoot_free(p)
       m11 = MALLOC_FREE_MEMORY => 0x3dee8
       m12 = GetFreeMemForAllocateMemory() => 0x141bcc
[Pass] ABS(m01-m11) => 0x0
[Pass] ABS(m02-m12) => 0x0
[Pass] suite = shoot_malloc_suite_contig(24*1024*1024) => 0xc5888
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x1
[Pass] suite->size => 0x1800000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0xc58b0
[Pass] chunk->signature => 'MemChunk'
[Pass] chunk->size => 0x1800000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x423680b0
[Pass] UNCACHEABLE(p) => 0x423680b0
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite_contig(0) => 0xc5888
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x1
[Pass] suite->size => 0x1dd4000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0xc58b0
[Pass] chunk->signature => 'MemChunk'
[Pass] chunk->size => 0x1dd4000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a000070
[Pass] UNCACHEABLE(p) => 0x4a000070
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite(64*1024*1024) => 0xc5888
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x3
[Pass] suite->size => 0x4000000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0xc58b0
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x1c94000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x423680b0
[Pass] UNCACHEABLE(p) => 0x423680b0
       chunk = GetNextMemoryChunk(suite, chunk) => 0xc5910
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x2898000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x413f8070
[Pass] UNCACHEABLE(p) => 0x413f8070
       chunk = GetNextMemoryChunk(suite, chunk) => 0xc5948
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x4000000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a000070
[Pass] UNCACHEABLE(p) => 0x4a000070
       chunk = GetNextMemoryChunk(suite, chunk) => 0x0
[Pass] total => 0x4000000
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] suite = shoot_malloc_suite(0) => 0xc5888
[Pass] suite->signature => 'MemSuite'
[Pass] suite->num_chunks => 0x3
[Pass] suite->size => 0x4700000
[Pass] chunk = GetFirstChunkFromSuite(suite) => 0xc58b0
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x1c94000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x423680b0
[Pass] UNCACHEABLE(p) => 0x423680b0
       chunk = GetNextMemoryChunk(suite, chunk) => 0xc5910
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x2898000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x413f8070
[Pass] UNCACHEABLE(p) => 0x413f8070
       chunk = GetNextMemoryChunk(suite, chunk) => 0xc5948
[Pass] chunk->signature => 'MemChunk'
[Pass] total += chunk->size => 0x4700000
[Pass] p = GetMemoryAddressOfMemoryChunk(chunk) => 0x4a000070
[Pass] UNCACHEABLE(p) => 0x4a000070
       chunk = GetNextMemoryChunk(suite, chunk) => 0x0
[Pass] total => 0x4700000
       shoot_free_suite(suite); suite = 0; chunk = 0;
[Pass] strlen("abc") => 0x3
[Pass] strlen("qwertyuiop") => 0xa
[Pass] strlen("") => 0x0
[Pass] strcpy(msg, "hi there") => 0x16bcbc
[Pass] msg => 'hi there'
[Pass] snprintf(a, sizeof(a), "foo") => 0x3
[Pass] snprintf(b, sizeof(b), "foo") => 0x3
[Pass] strcmp(a, b) => 0x0
[Pass] snprintf(a, sizeof(a), "bar") => 0x3
[Pass] snprintf(b, sizeof(b), "baz") => 0x3
[Pass] strcmp(a, b) => 0xfffffff8
[Pass] snprintf(a, sizeof(a), "Display") => 0x7
[Pass] snprintf(b, sizeof(b), "Defishing") => 0x9
[Pass] strcmp(a, b) => 0x4
[Pass] snprintf(buf, 3, "%d", 1234) => 0x2
[Pass] buf => '12'
[Pass] memcpy(foo, bar, 6) => 0x16bc80
[Pass] foo => 'asdfghuiop'
[Pass] memset(bar, '*', 5) => 0x16bc60
[Pass] bar => '*****hjkl;'
       bzero32(bar + 5, 5)
[Pass] bar => '****'
       EngDrvOut(LCD_Palette[0], 0x1234)
[Pass] shamem_read(LCD_Palette[0]) => 0x1234
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       call("TurnOffDisplay")
[Pass] DISPLAY_IS_ON => 0x0
       call("TurnOnDisplay")
[Pass] DISPLAY_IS_ON => 0x1
       task_create("test", 0x1c, 0x1000, test_task, 0) => 0x67c00be
[Pass] test_task_created => 0x1
[Pass] get_task_name_from_id(get_current_task()) => 'run_test'
[Pass] task_max => 0x68
[Pass] task_max => 0x68
[Pass] mq = mq ? mq : (void*)msg_queue_create("test", 5) => 0x67e0096
[Pass] msg_queue_post(mq, 0x1234567) => 0x0
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x0
[Pass] m => 0x1234567
[Pass] msg_queue_receive(mq, (struct event **) &m, 500) => 0x9
[Pass] sem = sem ? sem : create_named_semaphore("test", 1) => 0x6800304
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] take_semaphore(sem, 500) => 0x9
[Pass] give_semaphore(sem) => 0x0
[Pass] take_semaphore(sem, 500) => 0x0
[Pass] give_semaphore(sem) => 0x0
[Pass] rlock = rlock ? rlock : CreateRecursiveLock(0) => 0x682006a
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] AcquireRecursiveLock(rlock, 500) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0x0
[Pass] ReleaseRecursiveLock(rlock) => 0xf
       SetGUIRequestMode(1); msleep(1000);
[Pass] CURRENT_GUI_MODE => 0x1
       SetGUIRequestMode(2); msleep(1000);
[Pass] CURRENT_GUI_MODE => 0x2
       SetGUIRequestMode(0); msleep(1000);
[Pass] CURRENT_GUI_MODE => 0x0
[Pass] display_idle() => 0x1
       GUI_Control(BGMT_PLAY, 0, 0, 0); msleep(1000);
[Pass] PLAY_MODE => 0x1
[Pass] MENU_MODE => 0x0
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(1000);
[Pass] MENU_MODE => 0x1
[Pass] PLAY_MODE => 0x0
[Pass] dialog->type => 'DIALOG'
       GUI_Control(BGMT_MENU, 0, 0, 0); msleep(500);
[Pass] MENU_MODE => 0x0
[Pass] PLAY_MODE => 0x0
       SW1(1,100)
[FAIL] HALFSHUTTER_PRESSED => 0x0
       SW1(0,100)
[Pass] HALFSHUTTER_PRESSED => 0x0
[Pass] is_play_mode() => 0x1
[Pass] is_pure_play_photo_mode() => 0x1
[Pass] is_pure_play_movie_mode() => 0x0
[Pass] is_play_mode() => 0x1
[Pass] is_pure_play_photo_mode() => 0x0
[Pass] is_pure_play_movie_mode() => 0x0
[Pass] is_play_mode() => 0x1
[Pass] is_pure_play_photo_mode() => 0x0
[Pass] is_pure_play_movie_mode() => 0x1
[Pass] is_play_mode() => 0x1
[Pass] is_pure_play_photo_mode() => 0x0
[Pass] is_pure_play_movie_mode() => 0x0

canonlover

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #429 on: February 26, 2017, 09:20:09 PM »
Hola!  estoy haciendo pruebas con el video RAW de la canon 1200D y tengo resultados.

https://youtu.be/MwSieujggcY

es algo rapido espero tener tiempo en estos dias para hacer algo mas serio con davinci resolve y mejor composicion.

______________________________________________________________
ENGLISH


Hello! I am doing tests with the RAW video of the canon 1200D and I have results.

https://youtu.be/MwSieujggcY

Is something quick I hope to have time these days to do something more serious with davinci solves and better composition.


a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #430 on: February 27, 2017, 07:21:57 AM »
In the end it says: Test complete. 4401 passed, 1 failed.

Thanks; the failed one requires property changes enabled. That's pretty good.

Hello! I am doing tests with the RAW video of the canon 1200D and I have results.

I was expecting some actual test results...

Test, as in really test. As if you were QC working for a software company. Don't just use ML in normal situations and submit problems when things go wrong (and don't just do another ML RAW vs. H264 test, there are more than plenty of those out there). Try to break a feature. Think of as many possible scenarios as you can. Throw everything you can think of at a feature to break it. Try every value of every setting. Try it in extremely unusual scenes or lighting. Write down your results like a scientist doing an expirement. Then share your results, even if nothing went wrong. It's also helpful for devs to know when something actually works. Test for the sake of testing, with specific intention, not for the sake of making your 'budget short film'.

PankajDubey

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #431 on: March 16, 2017, 04:32:05 AM »
I am using it on EOS 1200D with 1.01 firmware by downloading the files from the link below and the video.
 I had to use the EOScard.exe file to get it working.

https://youtu.be/R9-hteAFBPg

Pankaj

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #432 on: March 17, 2017, 11:10:19 AM »
That means, the installer didn't work?

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #433 on: March 18, 2017, 09:09:09 AM »
Hi,

I could also install ML on my 1200D, it got stuck at the "EnableBootdisk" message first. So this was in the installer part I guess.
But after using the EOScard.exe utility on mySD card it works, thanks to all developers !

Cheers,
Janos

RobMac

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #434 on: March 19, 2017, 09:30:35 PM »
Hi I was just wondering where I can download the most recent build to use? I found a post that said it was the latest build but it was dated july 30 2016 so I just wanted to make sure it was the most recent one!
Thanks
Rob

PankajDubey

  • New to the forum
  • *
  • Posts: 3
Re: Canon 1200D
« Reply #435 on: March 20, 2017, 04:56:04 AM »
That means, the installer didn't work?

Yes, for me it worked only after I used the additional step.
(Or, no, it didn't work until I used the additional step of making the card bootable.)

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #436 on: March 20, 2017, 09:44:45 AM »
I'm talking about this installer, not the one from youtube...

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #437 on: March 21, 2017, 09:20:00 PM »
Hi,

I am looking forward to have the advanced intervalometer module available for the 1200D. Hopefully it doesn't take much effort to make it work on this camera.
Does anyone know if someone is working on it ?

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #438 on: March 21, 2017, 09:57:00 PM »
This one (and most other interesting stuff) will work as soon as somebody enables changing Canon properties (discussed on this page).

Reminder: I'm still waiting for feedback on this build. For example, nobody reported whether the installer works or not (the previous report appears to be for an older version). Also, a menu walkthrough would be nice; I'm pretty sure that build contains more than the Overlay menu and API tests, already covered.

Please remember this is a blind port (none of the active developers has a 1200D), so we really don't know how it looks or behaves if you don't provide feedback.

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #439 on: March 22, 2017, 08:42:40 AM »
Hi A1ex,

I have tested your installer yesterday evening, it stops at the "EnableBootdisk" message, than the screen goes blank. Nothing happens after unless I switch the camera off/on, then ML starts. In my case I have enabled boot with EOScard.exe already earlier,

cheers,
Janos

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #440 on: March 22, 2017, 08:50:03 AM »
Was it a fresh install (no ML on the camera before), or you already had it installed with the older installer (the one with smiley face)?

If you format the card from the camera, is ML restored successfully?

(just trying to narrow down the step where it got stuck)

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #441 on: March 22, 2017, 01:18:36 PM »
Hi a1ex,

I had already ML installed with the older installer, and I could do a format succesfully with ML preserved ( after executing your installer ).

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #442 on: March 22, 2017, 04:48:32 PM »
Can you record a video of the installation process? The exact moment of crash should give additional clues.

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #443 on: March 23, 2017, 03:49:01 PM »
Hi a1ex,

I have recorded the installation, you can watch it here and see where it stops:  https://youtu.be/fLUH9sNVsFQ
The camera is not freezing when I get the blank screen, just power saving. When I press the shutter half way the menu comes back and ML stays active ( boot flag was set already earlier as I explained )

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #444 on: March 23, 2017, 04:17:29 PM »
This is the old installer; please test the one I've linked a couple of times...

jarbi

  • New to the forum
  • *
  • Posts: 9
Re: Canon 1200D
« Reply #445 on: March 24, 2017, 08:51:38 AM »
Hi a1ex,

I'm sorry for the confusion, now I made sure I'm using your installer. Before installation I have disabled the boot flag on my SD card, and the installation was flawless this time !! But Murphy was also "present": the video I have recorded is somehow corrupt. Nevertheless I can post some screenshots from it: https://drive.google.com/open?id=0B5rc5Ssg9hE-c0JucnZCMlZFUUk

So your new installer works fine as I see, thanks again,

Cheers,


a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #446 on: March 24, 2017, 09:32:21 AM »
Looks good, thanks.

A few days ago, I've attempted to test the installer myself in QEMU (wanted to find out why it crashed, based on previous reports). The result is this - you can now run the unmodified autoexec.bin under QEMU and navigate the menus (both Canon and ML), on 1200D and a bunch of other models.

Previously, this was only possible on 500D (other models required modified autoexec.bin or did not start the GUI at all).

Fredestroyer007

  • New to the forum
  • *
  • Posts: 7
Re: Canon 1200D
« Reply #447 on: March 27, 2017, 01:57:19 AM »
a1ex, I confirm that the installer is working! I just install Magic Lantern on my camera. Will start extensive testing as per the preceding instruction ;)

Fredestroyer007

  • New to the forum
  • *
  • Posts: 7
Re: Canon 1200D
« Reply #448 on: March 27, 2017, 03:00:37 AM »
First problem! I can't acess the Magic Lantern menu in video mode (work just fine in Program, Manual, Aperture Priority and Shutter Priority!)! Is it normal?

Second problem! Each time I change the shutter speed using the dial, the menu seems to jump to the normal Canon menu than goes back to the magic lantern menu. Is it normal?

1. Overlay:
    - Zebras : NOT OK!
    - Focus Peak : NOT OK!
    - Magic Zoom : OK!
    - Cropmarks : OK!
    - Ghost Image : OK!
    - Spotmeter : OK!
    - False Color: NOT OK!
    - Histogram : OK!
    - Waveform : OK!
    - Vectorscope : OK!

2. Movie :
    - Bit Rate (CBR) : OK! (Tested up to 2x at 6400 ISO, don't know if it will go higher!)
    - REC key : OK!
    - Gradual Exposure : OK!
    - FPS override : OK!
    - HDR video : OK!
    - Vignetting : OK!
    - Image Fine-tuning : Not sure what it is suppose to do...
    - Creative Effects : OK!
    - Movie Tweaks : OK!

3. Shoot :
    - Intervalometer : OK!
    - Motion Detect : OK!
    - Shoot Preferences : OK!

4. Focus :
    - Trap Focus : OK!
    - DOF Settings : What is that???

5. Display :
    - LV DIGIC peaking : NOT OK! (The edge image option makes the menu unreadable, Slightly Sharper works fine!)
    - LV saturation : OK!
    - LV display gain : OK!
    - Clear overlays : OK!
    - Advanced settings : OK! (I didn't test HDMI out...)

6. Prefs :
    - Everything seems to be fine!

7. Modules :
    - I didn't test any module...

8. Debug :
    - How to test the debug module?

9. Help : NOT OK! (The help files aren't on the SD card...)

All test were done at 100 ISO and 6400 ISO using the Technicolor Cinestyle with a manual m42 lens (adapted to Canon Ef).

If there is any question, I will gladly answer them :)

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 10342
  • 5D Mark Free
Re: Canon 1200D
« Reply #449 on: March 27, 2017, 10:32:52 AM »
ML menu in video mode: select Debug -> Show GUI events and write down the values that appear when pressing the delete button (or record a video).

Focus peaking and false colors: what exactly is wrong with them?

Image Fine-tuning:
- ML digital ISO should... change brightness
- Black level: should adjust the blacks (deep shadows) in LiveView
- Absolute zero sharpness: should override picture style sharpening (should give lower sharpness than Canon's minimum level). If you don't want to pixel-peep, set picture style sharpness to maximum, then enable this option (so the difference will be obvious).
- Edge emphasis: you may need some pixel peeping for this one; not sure if it's of any use in practice.

- DOF settings: here and here
- LV DIGIC peaking: sounds like OK to me, as the effect applies to the entire image (including menus)