60D Err 70

Started by mattv8, July 12, 2014, 08:13:22 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

mattv8

Hi all,

Decided to start a new thread since I'm not positive that my error 70 relates to the other topic, although it is similar.

Camera boots up in C mode, but only after switching on/off in auto mode, then immediately switching on in C mode. Otherwise it'll throw a 70. At first I thought it was a bad firmware, so once I got it to boot, I flashed 1.1 (previously 1.0). I'm leaning towards this issue being related to camera settings, but I can't clear settings from C mode...

Another interesting side effect is that when it does boot into C mode, the display shows that it is in P mode.  ???

Once I had flashed 1.1, I tried to flash ML so it would at least log some errors, which are attached. Log could be misleading since it failed upon install. Any ideas? I'm not sure what steps to take next.

Fri Jul 11 16:55:20 2014
      0:    11.698 [STARTUP]
K287 ICU Firmware Version 1.1.1 ( 3.3.7 )
      1:    11.760 [STARTUP]
ICU Release DateTime 2012.05.14 13:18:25
      2:    12.031 [SEQ] CreateSequencer (Startup, Num = 6)
      3:    12.266 [SEQ] NotifyComplete (Cur = 0, 0x10000, Flag = 0x10000)
      4:    13.361 [SEQ] seqEventDispatch (Startup, 0)
      5:    13.390 [STARTUP] startupEntry
      6:    50.291 [PROPST] Initialize Adjective & Situation
      7:    50.640 [HPD] # 1 0 1
      8:    53.653 [PROPST] Clear Adjective & Situation (StartupCondition)
      9:    54.023 [PROPST] AEMode New:0 Last:0
     10:    54.112 [PROPST] Active Adjective & Situation
     11:    54.217 [PROPST] ReqChangeCBR : Adjective 0, 0
     12:    54.249 [PROPST] Not ExecMultiConvert Already None : Adjective 0, 0
     13:    54.317 [PROPST] Not ExecMultiConvert : Situation 0
     14:    54.375 [PROPST]  CurrentAdjective 0 0
     15:    55.204 [HPD] CreateTask Master End
     16:    56.424 [EM] emSlaveChangeCBR : AUTO_POWEROFF (1)
     17:    56.561 [EM] emSlaveChangeCBR : UILOCK (0x0)
     18:    56.922 [HPD] ERASE SW OFF
     19:   107.757 [STARTUP] startupPropAdminMain : End
     20:   107.829 [SEQ] NotifyComplete (Cur = 1, 0x20000002, Flag = 0x20000000)
     21:   148.166 [SEQ] NotifyComplete (Cur = 1, 0x2, Flag = 0x2)
     22:   148.613 [PROPST] AEMode New:0 Last:0
     23:   149.020 [PRP] Deliv WaitID = 0x80000001, 0xFF1B8BF8(1)
     24:   149.465 [PRP] Complete WaitID = 0x80000001, 0xFF1B8BF8(0)
     25:   149.589 [PRP] SpecialComplete ID = 0x80000001, 0x80000001 1034
     26:   150.183 [SEQ] seqEventDispatch (Startup, 1)
     27:   150.223 [STARTUP] startupPrepareProperty
     28:   150.774 [PRP] MovieParamData
     29:   150.900 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
     30:   151.631 [FM] FM_Initialize (0, 1, 0)
     31:   152.634 [FM] fmResultCBR (0x80e344)
     32:   153.442 [FM] PROP_HDD_DCIM_PATH (/)
     33:   153.863 [PROPST] AEMode New:7 Last:0
     34:   153.895 [PROPST] FromSaveTimming = 2(489)
     35:   154.709 [PRP] Complete WaitID = 0x8000003F, 0x00000000(0)
     36:   156.014 [FC] FC_Initialize [drive:3][ClassID:39]
     37:   156.299 [FM] PROP_CARD1_STATUS = 0x1
     38:   156.396 [FM] PROP_CARD1_FOLDER_NUMBER = 142
     39:   156.462 [FM] PROP_CARD1_FILE_NUMBER = 0
     40:   156.537 [FM] PROP_CARD2_STATUS = 0x1
     41:   156.594 [FM] PROP_CARD2_FOLDER_NUMBER = 100
     42:   156.649 [FM] PROP_CARD2_FILE_NUMBER = 9637
     43:   156.711 [FM] PROP_CARD3_EXIST = 0
     44:   156.745 [FM] PROP_CARD3_STATUS = 0x1
     45:   156.779 [FM] PROP_CARD3_RECORD = 0 => 0
     46:   156.820 [FM] PROP_CARD3_FOLDER_NUMBER = 100
     47:   156.866 [FM] PROP_CARD3_FILE_NUMBER = 0
     48:   156.929 [FM] PROP_FILE_NUMBERING_MODE = 1, 0
     49:   156.968 [FM] PROP_CARD_EXTENSION = 69
     50:   157.005 [FM] PROP_CURRENT_MEDIA = 2
     51:   157.047 [FM] PROP_USBDEVICE_CONNECT = -1
     52:   157.094 [FM] PROP_NUMBER_OF_CONTINUOUS_MODE = 9637
     53:   157.130 [SEQ] NotifyComplete (Cur = 2, 0x10, Flag = 0x10)
     54:   157.225 [FM] PROP_DSDEFINE ModelId 80000287
     55:   157.283 [FM] PROP_FILE_NUMBERING_MODE = 1, 9637
     56:   157.338 [SEQ] seqEventDispatch (Startup, 2)
     57:   157.357 [STARTUP] startupPrepareCapture
     58:   157.914 [RSC] hMemoryQueue (0x620010) hStorageQueue (0x640012)
     59:   159.066 [RSC] AllocateMemoryUnit For ExMem1
     60:   159.088 [RSC] AllocateMemoryUnit For ExMem1_2
     61:   159.104 [RSC] AllocateMemoryUnit For OnlyMem1
     62:   159.935 [RSC] MemMgr(IMAGE) 0 2
     63:   159.961 [RSC] MemMgr(IMAGE) 0 0
     64:   159.981 [RSC] MemMgr(IMAGE) 0 7
     65:   159.998 [RSC] MemMgr(IMAGE) 0 0
     66:   160.058 [RSC] PROP_MEMORY_STATUS(SELF) (0->)3 (OTHER) 3
     67:   160.073 [RSC] Deliver PROP_MEMORY_STATUS 3
     68:   160.542 [RSC] SRMExMem1_1State Event 0 Result State 0->6
     69:   160.573 [RSC] hExMem1_2StateObject Through Event 0 State 0
     70:   161.015 [RSC] SRMExMem1_1State Event 4 Result State 6->6
     71:   161.043 [RSC] hExMem1_2StateObject Through Event 4 State 0
     72:   161.709 [RSC] this->dwCardStatus[0] = 0x1(552)
     73:   162.332 [RSC] this->dwCardStatus[1] = 0x1(552)
     74:   162.951 [RSC] this->dwCardStatus[2] = 0x1(552)
     75:   163.567 [RSC] PROP_PC_HDD_STATUS = 0x1
     76:   164.349 [RSC] NO IMAGEFORMAT EstimatedSize.c 13
     77:   164.380 [RSC] NO IMAGEFORMAT EstimatedSize.c 13
     78:   164.420 [RSC] ERROR SetDevelopImageCondition DevelopCombination.c 107
     79:   165.354 [RTC] !! RTC CHECK ERROR !!

     80:   167.089 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 128
     81:   167.236 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 128
     82:   167.362 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 128
     83:   168.047 [JOB] InitializeJobClass (ID = 8010, Num = 17)
     84:   168.267 [JOB] [BIND] dcsResultCBR (0x9322c8)
     85:   168.455 [JOB] PROP_CFN_TAB2 32 32
     86:   170.000 [CERES]  RegisterGPSInfoCallback
     87:   170.545 [EM] emLockControl (TYPE_JOBSTATE = 0x0)
     88:   171.390 [JOB] InitializeInnerDevelopJobClass (ID = 8010, Num = 16)
     89:   171.425 [JOB] InitializeMultipleExposureSaveAndEndJobClass ( Num = 10 )
     90:   171.734 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     91:   171.804 [STARTUP] ERROR ASSERT : Line 108
     92:   171.841 [STARTUP] ERROR ASSERT : FALSE
     93:   171.915 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     94:   172.294 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     95:   172.394 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)
     96:   173.608 [SND] Seq LPC 5-0
     97:   173.651 [SND]  HARB_ARBMODE  Before:0x00000000 Current:0x00000000
     98:   173.687 [SND]  HARB_HARBCTRL Before:0x002AEAA8 Current:0x002AEAA8
     99:   173.697 [SND] Seq LPC 5-1
    100:   173.731 [SND] Seq LPC 5-2
    101:   173.770 [SND] Seq LPC 5-3
    102:   173.793 [SND] Seq LPC 5-4
    103:   173.803 [SND] Seq LPC 5-5
    104:   173.822 [SND] Seq LPC 5-6
    105:   174.173 [SND] Seq LPC 5-7
    106:   174.183 [SND] Seq LPC fin
    107:   175.173 [SEQ] NotifyComplete (Cur = 3, 0xe0110, Flag = 0x40000)
    108:   175.358 [EM] emRegisterMulticastCallback : EventID = 14, ClassID = 147
    109:   175.527 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 147
    110:   175.662 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 147
    111:   175.790 [EM] emRegisterMulticastCallback : EventID = 15, ClassID = 147
    112:   175.919 [EM] emRegisterMulticastCallback : EventID = 5, ClassID = 147
    113:   176.038 [EM] emRegisterMulticastCallback : EventID = 6, ClassID = 147
    114:   176.160 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 147
    115:   176.287 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 147
    116:   176.411 [EM] emRegisterMulticastCallback : EventID = 8, ClassID = 147
    117:   176.523 [EM] emRegisterMulticastCallback : EventID = 9, ClassID = 147
    118:   176.634 [EM] emRegisterMulticastCallback : EventID = 10, ClassID = 147
    119:   176.755 [EM] emRegisterMulticastCallback : EventID = 17, ClassID = 147
    120:   176.906 [SHTC] scsInit
    121:   177.875 [ENG] [ENGIO](Addr:0x5c880000, Data:0x   30000)
    122:   183.614 [SEQ] NotifyComplete (Cur = 3, 0xa0110, Flag = 0x80000)
    123:   183.789 [SHTB] sbsInit
    124:   183.989 [SHTB] VShadingAddress:0x5c8c9960, Size:901120
    125:   184.655 [SHTP] spsInit
    126:   184.728 [FM] FM_RegisterSpaceNotifyCallback
    127:   184.838 [MRK] RegisterSpaceNotifyCallback : DriveNo = 2
    128:   184.874 [FM] voiRegisterSpaceNotifyCallback : DriveNo = 2
    129:   184.901 [FM] RegisterSpaceNotifyCallback : DriveNo = 2
    130:   184.956 [FC] FcmcRegisterSpaceNotifyCallback : DriveNo = 2
    131:   184.977 [FM] FM_RegisterSpaceNotifyCallback
    132:   185.185 [SEQ] NotifyComplete (Cur = 3, 0x20110, Flag = 0x100)
    133:   185.291 [WFT]  TOM_Initialize
    134:   186.007 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 158
    135:   186.193 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 158
    136:   186.323 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 158
    137:   186.893 [EM] emRegisterMulticastCallback : EventID = 0, ClassID = 167
    138:   187.046 [EM] emRegisterMulticastCallback : EventID = 11, ClassID = 167
    139:   187.087 [EM] Already SW1OFF
    140:   187.236 [MC] cam event metering timer start
    141:   187.531 [EM] emRegisterMulticastCallback : EventID = 7, ClassID = 167
    142:   187.708 [EM] emRegisterMulticastCallback : EventID = 1, ClassID = 167
    143:   187.838 [EM] emRegisterMulticastCallback : EventID = 4, ClassID = 167
    144:   187.959 [EM] emRegisterMulticastCallback : EventID = 3, ClassID = 167
    145:   188.074 [EM] emRegisterMulticastCallback : EventID = 2, ClassID = 167
    146:   188.201 [EM] emRegisterMulticastCallback : EventID = 18, ClassID = 131
    147:   188.330 [EM] emRegisterMulticastCallback : EventID = 19, ClassID = 131
    148:   188.879 [EM] emRegisterMulticastCallback : EventID = 13, ClassID = 167
    149:   188.981 [TA10] TA10_Initialize : Start
    150:   189.388 [TA10] TA10S_Initialize : Start
    151:   189.474 [TA10] TA10S_Initialize : CreateStageClass
    152:   189.693 [TA10] TA10S_Initialize : End
    153:   189.816 [TA10] TA10_Initialize : End
    154:   189.946 [FM] fmInitialized
    155:   190.015 [FC] _FC_SetDirSuffix (CANON)
    156:   190.096 [FC] _FC_SetConsecutiveMode (mode = 1, DCF = 9637)
    157:   190.201 [FM] fmPrepare
    158:   192.004 [FM] ALV_Initialize (36, 25)
    159:   192.324 [FM] fmAllocDcfNo(0x80e100)(0x0)
    160:   203.413 [TERM] terminateChangeCBR : SHUTDOWN (255)
    161:   203.465 [TERMINATE] SHUTDOWN init comp
    162:   203.593 [TERM] terminateChangeCBR : AUTO_POWEROFF (1)
    163:   203.649 [TERMINATE] Abort init comp
    164:   204.227 [WFT]  PROP_WFT_IMAGE_TRANS (1)
    165:   205.897 [MC] PROP_DISPLAY_OFF_SENSOR : 1
    166:   206.057 [MC] DisplaySensor : 1(0)
    167:   206.571 [MC] PROP_GUI_STATE 0
    168:   206.733 [MC] PROP_LV_ACTION : LV_STOP
    169:   206.829 [MC] PROP_LV_DISPBUSY : not Busy
    170:   206.928 [MC] PROP_LV_LOCK : LVLOCK_PERMIT
    171:   207.021 [MC] PROP_DISABLE_PLAY_IMAGE : Enable Play
    172:   207.123 [MC] JobState 0
    173:   208.140 [MC] QRTime : 2
    174:   208.480 [MC] PROP_VARIANGLE_GUICTRL : Enable
    175:   208.769 [MC] regist master CardCover
    176:   209.734 [TA10] ta10_ChangePropCBR ShotsPlan 45 / TotalSheets 45
    177:   211.457 [PRP] MovieParamData
    178:   211.547 [PRP] mode 0 size 0x0 , framerate 0x1e , type 0xf zoom 0x0
    179:   212.623 [JOB] PROP_CFN_TAB2 0 0
    180:   213.050 [MC] GuiGroundState : 1
    181:   213.375 [MC] PROP_LV_ACTION : LV_STOP
    182:   215.833 [SHTC] Mem1Component Size=0x37a54
    183:   216.620 [SHTC] DarkcurAddress:0x5c9a5960, Size:131072
    184:   216.724 [SHTC] scsProperty ID=0x0(0x80)
    185:   216.779 [SHTC] scsProperty ID=0x80040004(0x0)
    186:   217.536 [PRP] Deliv WaitID = 0x8000003F, 0xFF02BE84(1)
    187:   217.659 [PRP] Deliv WaitID = 0x8000003F, 0xFF02A10C(2)
    188:   217.769 [TA10] ta10_ChangePropCBR ShotsPlan 2 / TotalSheets 2
    189:   217.870 [PRP] Deliv WaitID = 0x8000003F, 0xFF080794(3)
    190:   218.200 [PRP] Complete WaitID = 0x8000003F, 0xFF02A10C(2)
    191:   218.568 [PRP] Complete WaitID = 0x8000003F, 0xFF080794(1)


Stedda

Lots of things to try in this thread instead of waiting....

http://www.magiclantern.fm/forum/index.php?topic=4105.0
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

mattv8

Thanks for the reply.
I've read through the thread and have tried various things. That's how I was eventually able to get the camera to boot into C mode. Looking at my error log, I notice the same few errors as in the other thread regarding the assert handler. Would it be too risky to attempt a boot that bypasses the AH with the modified autoexec?


     90:   171.734 [STARTUP] ERROR ASSERT : DevelopCombination.c, Task = RscMgr
     91:   171.804 [STARTUP] ERROR ASSERT : Line 108
     92:   171.841 [STARTUP] ERROR ASSERT : FALSE
     93:   171.915 [STARTUP] ASSERT Time 1899/12/31 0:0:0
     94:   172.294 [STARTUP] startupErrorRequestChangeCBR (0x1d)
     95:   172.394 [STARTUP] startupErrorRequestChangeCBR : ErrorSend (101, ABORT)


Perhaps this is far too similar to the other post. Reading again, a1ex quoted the symptoms of another brick that seems identical to mine:

Quote from: a1ex on January 08, 2013, 09:55:14 AM
My canon 60d got bricked with error 70 when I connected a flash extension cable to my canon 430EX II flash. It will display error 70 on all shooting modes except in "C", but I need to set first the shooting mode in "CA" then switch off, set shooting mode to "C" and switch on. [...]

Crash Log:

ASSERT: FALSE
at DevelopCombination.c:108, task RscMgr
lv:0 mode:0


Magic Lantern version : v2.3.60D.111
Mercurial changeset   : 7fee07c3b461+ (unified) tip
Built on 2012-07-23 16:06:13 by alex@thinkpad.
Free Memory  : 152K + 1341K

Stedda

Reply 42 looks like the ticket... start there....
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

mattv8

Thanks for pointing me in the right direction, I'll try it out and get back.

mattv8

Alright I'm back. I was able to get gphoto2 to work and connect to my camera. I executed the two commands that a1ex recommended. Still getting the error 70  Attempted to reflash 1.1.1 again (just to be safe) yet still the same sypmtoms. :(


C:\win32>gphoto2.bat

C:\win32>set CAMLIBS=camlibs

C:\win32>set IOLIBS=iolibs

C:\win32>gphoto2.exe
Usage: gphoto2 [--usage] [--debug] [--debug-logfile=FILENAME] [--quiet]
        [--hook-script=FILENAME] [--stdout] [--stdout-size] [--auto-detect]
        [--show-exif=STRING] [--show-info=STRING] [--summary] [--manual]
        [--about] [--storage-info] [--shell] [--list-cameras] [--list-ports]
        [--port=FILENAME] [--speed=SPEED] [--camera=MODEL] [--usbid=USBIDs]
        [--list-config] [--list-all-config] [--get-config=STRING]
        [--set-config=STRING] [--set-config-index=STRING]
        [--set-config-value=STRING] [--wait-event=COUNT]
        [--wait-event-and-download=COUNT] [--capture-preview] [-B SECONDS]
        [-F COUNT] [-I SECONDS] [--reset-interval] [--capture-image]
        [--capture-image-and-download] [--capture-movie=COUNT or SECONDS]
        [--capture-sound] [--capture-tethered=COUNT] [-m DIRNAME] [-r DIRNAME]
        [-p RANGE] [-t RANGE] [--get-metadata=RANGE] [--get-all-metadata]
        [--upload-metadata=STRING] [--get-raw-data=RANGE] [--get-all-raw-data]
        [--get-audio-data=RANGE] [--get-all-audio-data] [-d RANGE] [-u FILENAME]

        [--filename=FILENAME_PATTERN] [-f FOLDER] [--no-recurse] [--new]
        [--force-overwrite]

C:\win32>gphoto2 --auto-detect
Model                          Port
----------------------------------------------------------
Canon EOS 60D                  usb:bus-0,\\.\libusb0-0001--0x04a9-0x3215

C:\win32>gphoto2 --set-config /main/imgsettings/imageformat=0

C:\win32>gphoto2 --set-config /main/imgsettings/imageformatsd=0

C:\win32>

Stedda

You need more help than I can offer... I guess you'll have to wait for a DEV to help.
5D Mark III -- 7D   SOLD -- EOS M 22mm 18-55mm STM -- Fuji X-T1 18-55 F2.8-F4 & 35 F1.4
Canon Glass   100L F2.8 IS -- 70-200L F4 -- 135L F2 -- 85 F1.8 -- 17-40L --  40 F2.8 -- 35 F2 IS  Sigma Glass  120-300 F2.8 OS -- 50 F1.4 -- 85 F1.4  Tamron Glass   24-70 2.8 VC   600EX-RT X3

mattv8

Thanks for the help so far. I'll mess with some other potential solutions as I wait for a dev.

a1ex

Easy to solve, just give me a few days.

mattv8

Thank you a1ex, I can wait until you're free.

mattv8

A1ex will you have a free moment the next few days? I still have not been able to fix my error 70. Thanks!

bo_vagabundo

I have the problem with 60D and error 70. After shooting outdoor, the camera stopped working first, the mode AV was on but it wouldn't shoot when shutter was pressed. Then it switched off. After recharging the battery fully, the screen showed Error 70, after I pulled the battery out and put it back, camera switches on on M mode, but freezes. I can't enter into menu to reset or choose any other mode to switch to. It stays the same. Can you please advise what i could do to put it back in normal? Does camera have a hard reset option?

a1ex

@mattv8: solved by PM.

@bo_vagabundo: this seems to be a different issue; do you have any error log on the card? can you record a movie of your camera screen, that shows the issue?

Seedubs

Hi,

I am new to the forums, although have used ML in the past.   I currently have the dreaded Err 70 problem and whilst I have read the forums for solutions, mine is somewhat different. 

My 60D is completely unresponsive, I cannot even connect to it via USB if there is a SD Card in the slot.   I have managed to get Gphoto2 working, and can query it, but since I have no access I cannot flash the firmware at all.  Can this be done with Gphoto2, or at least reset it back to default.

I have applied the two suggested entries:

C:\win32>gphoto2 --set-config /main/imgsettings/imageformat=0

C:\win32>gphoto2 --set-config /main/imgsettings/imageformatsd=0

But both fail with errors shown:

*** Error ***
Failed to set new configuration value 0 for configuration entry /main/imgsetting
s/imageformatsd.
*** Error (-110: 'I/O in progress') ***

Log file (not sure if it actually says anything useful?):

0.000000 main(2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDING DEBUG MESSAGES TO THE MAILING LIST:
0.000000 main(2): gphoto2 2.4.14
0.000000 main(2): gphoto2 has been compiled with the following options:
0.000000 main(2):  + gcc (C compiler used)
0.000000 main(2):  + popt (mandatory, for handling command-line parameters)
0.000000 main(2):  + exif (for displaying EXIF information)
0.000000 main(2):  + no cdk (for accessing configuration options)
0.000000 main(2):  + no aa (for displaying live previews)
0.000000 main(2):  + jpeg (for displaying live previews in JPEG format)
0.000000 main(2):  + no readline (for easy navigation in the shell)
0.000000 main(2): libgphoto2 2.4.14
0.000000 main(2): libgphoto2 has been compiled with the following options:
0.000000 main(2):  + gcc (C compiler used)
0.000000 main(2):  + ltdl (for portable loading of camlibs)
0.000000 main(2):  + EXIF (for special handling of EXIF files)
0.000000 main(2): libgphoto2_port 0.8.0
0.000000 main(2): libgphoto2_port has been compiled with the following options:
0.000000 main(2):  + gcc (C compiler used)
0.000000 main(2):  + ltdl (for portable loading of camlibs)
0.000000 main(2):  + USB (libusb, for USB cameras)
0.000000 main(2):  + serial (for serial cameras)
0.000000 main(2):  + no resmgr (serial port access and locking)
0.000000 main(2):  + no ttylock (serial port locking)
0.000000 main(2):  + no lockdev (serial port locking)
0.000000 main(2): CAMLIBS = './camlibs'
0.000000 main(2): IOLIBS = './iolibs'
0.000000 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto
0.000000 setting/gphoto2-setting.c(2): Can't open settings file for reading
0.000000 setting/gphoto2-setting.c(2): Loading settings from file "/home/Chris/.gphoto/settings"
0.000000 setting/gphoto2-setting.c(2): Can't open settings for reading
0.000000 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto
0.000000 setting/gphoto2-setting.c(2): Can't open settings file for reading
0.000000 setting/gphoto2-setting.c(2): Loading settings from file "/home/Chris/.gphoto/settings"
0.000000 setting/gphoto2-setting.c(2): Can't open settings for reading
0.000000 main(2): The user has not specified both a model and a port. Try to figure them out.
0.000000 gphoto2-port-info-list(2): Using ltdl to load io-drivers from './iolibs'...
0.000000 gphoto2-port-info-list(2): Called for filename './iolibs/disk'.
0.000000 gphoto2-port/disk(2): found fstab fsname C:/bin
0.000000 gphoto2-port/disk(2): found fstab fsname C:/lib
0.000000 gphoto2-port/disk(2): found fstab fsname C:
4.602009 gphoto2-port/disk(2): found fstab fsname E:
4.602009 gphoto2-port/disk(2): found fstab fsname F:
4.602009 gphoto2-port/disk(2): found fstab fsname K:
4.617609 gphoto2-port/disk(2): found fstab fsname Y:
4.633209 gphoto2-port/disk(2): found fstab fsname Z:
4.664409 gphoto2-port/disk(2): found mtab fsname C:/bin
4.664409 gphoto2-port/disk(2): found mtab fsname C:/lib
4.664409 gphoto2-port/disk(2): found mtab fsname C:
4.664409 gphoto2-port/disk(2): found mtab fsname E:
4.664409 gphoto2-port/disk(2): found mtab fsname F:
4.664409 gphoto2-port/disk(2): found mtab fsname K:
4.680009 gphoto2-port/disk(2): found mtab fsname Y:
4.695609 gphoto2-port/disk(2): found mtab fsname Z:
4.711209 gphoto2-port-info-list(2): Could not load port driver list: 'Unspecified error'.
4.711209 gphoto2-port-info-list(2): Called for filename './iolibs/ptpip'.
4.711209 gphoto2-port-info-list(2): Loaded 'PTP/IP Connection' ('ptpip:') from './iolibs/ptpip'.
4.711209 gphoto2-port-info-list(2): Loaded '' ('^ptpip') from './iolibs/ptpip'.
4.711209 gphoto2-port-info-list(2): Called for filename './iolibs/serial'.
4.711209 gphoto2-port-info-list(2): Loaded '' ('^serial') from './iolibs/serial'.
4.711209 gphoto2-port-info-list(2): Called for filename './iolibs/usb'.
4.726809 gphoto2-port-info-list(2): Loaded '' ('^usb:') from './iolibs/usb'.
4.726809 gphoto2-port-info-list(2): Loaded 'Universal Serial Bus' ('usb:bus-0,\\.\libusb0-0001--0x04a9-0x3215') from './iolibs/usb'.
4.726809 gphoto2-port-info-list(2): Called for filename './iolibs/usb1'.
4.726809 gphoto2-port-info-list(2): Could not load './iolibs/usb1': 'The specified module could not be found.'.
4.726809 gphoto2-port-info-list(2): Called for filename './iolibs/usbdiskdirect'.
4.726809 gphoto2-port-info-list(2): Called for filename './iolibs/usbscsi'.
4.726809 gphoto2-port-info-list(2): Counting entries (6 available)...
4.726809 gphoto2-port-info-list(2): 2 regular entries available.
4.726809 gphoto2-abilities-list(2): Using ltdl to load camera libraries from './camlibs'...
4.726809 gphoto2-abilities-list(2): Found './camlibs/adc65'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/agfa_cl20'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/aox'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/ax203'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/barbie'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/canon'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/casio_qv'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/clicksmart310'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/digigr8'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/digita'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/dimagev'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/dimera3500'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/directory'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/enigma13'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/fuji'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/gsmart300'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/hp215'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/iclick'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/jamcam'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/jd11'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/jl2005a'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/jl2005c'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/kodak_dc120'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/kodak_dc210'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/kodak_dc240'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/kodak_dc3200'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/kodak_ez200'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/konica'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/konica_qm150'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/largan'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/lg_gsm'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/mars'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/mustek'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/panasonic_coolshot'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/panasonic_dc1000'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/panasonic_dc1580'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/panasonic_l859'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/pccam300'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/pccam600'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/polaroid_pdc320'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/polaroid_pdc640'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/polaroid_pdc700'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/ptp2'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/ricoh'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/ricoh_g3'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/samsung'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sierra'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sipix_blink2'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sipix_web2'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/smal'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sonix'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sony_dscf1'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sony_dscf55'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/soundvision'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/spca50x'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sq905'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/st2205'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/stv0674'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/stv0680'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/sx330z'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/topfield'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/toshiba_pdrm11'.
4.726809 gphoto2-abilities-list(2): Found './camlibs/tp6801'.
4.726809 gp-abilities-list(2): Found 63 camera drivers.
4.773609 gphoto2-abilities-list(2): Failed to load './camlibs/jl2005c': The specified module could not be found..
4.929609 gphoto2-abilities-list(2): Failed to load './camlibs/sipix_blink2': The specified module could not be found..
4.992009 gphoto2-port-info-list(2): Counting entries (6 available)...
4.992009 gphoto2-port-info-list(2): 2 regular entries available.
4.992009 gphoto2-port(2): Creating new device...
4.992009 gphoto2-port-info-list(2): Getting info of entry 0 (6 available)...
5.007609 gphoto2-port(2): Setting settings...
5.007609 gphoto2-port-info-list(2): Getting info of entry 1 (6 available)...
5.007609 gphoto2-port(2): Setting timeout to 5000 milliseconds...
5.007609 gphoto2-port(2): Setting settings...
5.007609 libusb(2): gp_port_usb_update(old int=0, conf=-1, alt=-1), (new int=0, conf=-1, alt=-1)
5.007609 gphoto2-abilities-list.c(1): Auto-detecting USB cameras...
5.007609 gphoto2-port-usb(1): Looking for USB device (vendor 0x4a9, product 0x3215)... found.
5.007609 gphoto2-port-usb(2): inep to look for is 81
5.007609 gphoto2-port-usb(1): Detected defaults: config 1, interface 0, altsetting 0, inep 81, outep 02, intep 83, class 06, subclass 01
5.007609 gphoto2-abilities-list.c(2): Found 'Canon EOS 60D' (0x4a9,0x3215)
5.007609 gphoto2-port(2): Freeing port...
5.007609 gphoto2-port(2): Closing port...
5.007609 gphoto2-camera(2): Setting abilities ('Canon EOS 60D')...
5.007609 setting/gphoto2-setting.c(2): Creating $HOME/.gphoto
5.007609 setting/gphoto2-setting.c(2): Can't open settings file for reading
5.007609 setting/gphoto2-setting.c(2): Loading settings from file "/home/Chris/.gphoto/settings"
5.007609 setting/gphoto2-setting.c(2): Can't open settings for reading
5.007609 gphoto2-setting(2): Setting key 'model' to value 'Canon EOS 60D' (gphoto2)
5.007609 gphoto2-setting(2): Saving 1 setting(s) to file "/home/Chris/.gphoto/settings"
5.007609 setting/gphoto2-setting.c(2): Can't open settings file for writing
5.007609 gphoto2-port-info-list(2): Looking for path 'usb:bus-0,\\.\libusb0-0001--0x04a9-0x3215' (6 entries available)...
5.007609 gphoto2-port-info-list(2): Getting info of entry 1 (6 available)...
5.007609 gphoto2-camera(2): Setting port info for port 'Universal Serial Bus' at 'usb:bus-0,\\.\libusb0-0001--0x04a9-0x3215'...
5.007609 gphoto2-port(2): Setting timeout to 5000 milliseconds...
5.007609 gphoto2-port(2): Setting settings...
5.007609 libusb(2): gp_port_usb_update(old int=0, conf=-1, alt=-1), (new int=0, conf=-1, alt=-1)
5.007609 gphoto2-setting(2): Setting key 'port' to value 'usb:bus-0,\\.\libusb0-0001--0x04a9-0x3215' (gphoto2)
5.007609 gphoto2-setting(2): Saving 2 setting(s) to file "/home/Chris/.gphoto/settings"
5.007609 setting/gphoto2-setting.c(2): Can't open settings file for writing
5.007609 gp-camera(2): Freeing camera...
5.007609 gphoto2-port(2): Freeing port...
5.007609 gphoto2-port(2): Closing port...
5.007609 gphoto2-filesystem(2): resetting filesystem
5.007609 libgphoto2/gphoto2-filesys.c(2): Clearing fscache LRU list...
5.007609 libgphoto2/gphoto2-filesys.c(2): fscache LRU list already empty
5.007609 gphoto2-filesystem(2): Internally deleting all folders from '/'...
5.007609 gphoto2-filesystem(2): Lookup folder '/'...
5.007609 gphoto2-filesystem(2): Found! / is 0x20042668
5.007609 gphoto2-filesystem(2): Recurse delete folder 0x20042668//

I shall PM a1ex, but if anyone has any suggestions I would be very grateful.

Cheers

Seedubs