Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - NikeFreak

#26
если в фотоаппарате стоит прошивка 104, как установить загрузчик? в шапке темы он для 101.
If the camera firmware is 104, how to install boot loader? in the cap threads it for 101.
#27
Quote from: satriani on August 03, 2013, 02:02:16 PM
Here is a new build for 1.0.4
https://www.dropbox.com/sh/hxsv61cq992egmy/8yORNshRBf/ML_N_03.08.2013.zip

But, please read this
http://www.magiclantern.fm/forum/index.php?topic=6320.msg63587.msg#63587
befor using this build!
а чем прошивать 104, что бы мл 104 прошивка читала?
какой порядок действий?
1, нужно удалить загрузочный флаг через утилиту EOScard
2, отформатировать флешку.
3, прошить фотоаппарат на официальную 1,0,4.
4, что дальше?
and sew than 104, which would be 104 ml firmware read it?
what course of action?
1, you must remove the bootable flag through the utility EOScard
2, format the USB flash drive.
3, flash the camera to an authorized 1,0,4.
4, what's next?
#28
Quote from: 1% on August 03, 2013, 12:05:28 AM
I don't have an auto nightly but I update when there is a change.
где можно найти обновленные сборки?
where you can find the updated build?
#29
пожалуйста дайте мл для 104 прошивк, у меня завтра съемка, я бы хотел использовать мл прошивку. буду благодарен.
please give ml for 104 firmware, I shoot tomorrow, I'd like to use the firmware ml. I will be grateful.
#30
здравствуйте, скажите есть ли свежие сборки мл для 6д,  для 650д есть такие https://www.dropbox.com/sh/hxsv61cq992egmy/BtTgp4q6i0 сборки, а есть ли подобное для 6д?
Hello, tell me is there any fresh assembly ml for 6d, 650d to have such https://www.dropbox.com/sh/hxsv61cq992egmy/BtTgp4q6i0 assembly, and there is similar for 6d?
#31
Quote from: lindor on July 25, 2013, 03:33:57 PM
Hello everyone, thanks for your work!!!
I have a problem with video crop. ( only with lens canon 18-135 mm and 100 2.8 macro... no problem with 28 1.8 and 50 1.4)
in low light conditions and with high iso ... there is a fixed dead pixels on the monitor for the entire shot.
below two example...



only with low brightness

in high light ...all ok




can you help?


thank you!!!

sorry for my english!!

это нормально, на всех фотоаппарат такое можно заметить, при высоких исо будут видно битый пиксиль, если включить кроп мод то их видно еще лучше, в обычном режиме я их не замечаю.
it is normal for all camera so you can see at high ISO will be seen broken piksil if you include crop modes that you can see them even better, as usual I did not notice.
#32
уже есть первый шаги.!!!
already have the first steps.!!!

[spoiler]Today's changes:
----------------

728e571a1276 | condellog: 650D.104: Stubs founds, some consts checked. Waiting for boot
ac3f8247a551 | alex: dual_iso: slower update when other menus are active; fine-tuned for less cpu usage (less accurate)
1f71148896cc | alex: Reduced CPU usage for black level calculation (using less accuracy)
aaf364feeff1 | alex: dual_iso: fix auto ISO calculation

platform/650D.104/mvr.h                     |  283 ++++++++++++++++++++++++++++
platform/650D.104/consts.h                  |  277 +++++++++++++++++++++++++++
platform/650D.104/stubs.S                   |  242 +++++++++++++++++++++++
platform/650D.104/internals.h, platform/650D.104/gui.h, platform/650D.104/features.h,
modules/dual_iso/dual_iso.c, platform/650D.101/stubs.S, platform/650D.104/cfn.c, src/raw.c,
platform/650D.104/Makefile, platform/650D.104/Makefile.platform.default,
platform/650D.104/Makefile.setup.default, platform/650D.104/misc.c

14 files changed, 1136 insertions(+), 12 deletions(-)[/spoiler]
#33
Quote from: nanomad on July 23, 2013, 03:00:32 PM
I'm working on the 1.0.4 port, more news in a couple of days :)
это очень хорошо, спасибо вам большое, скажите а возможно ли в 650д добавить Time code как например в 6д ?
it's very good, thank you very much, is it possible to tella 650d add Time code such as in 6d?
#34
возможно сделать кроп мод:
1, установить функцию на горячую кнопку?
2, работал в режиме записи видео?
3, при активации  кроп мод на экране отображались фокусные расстояния эквивалентные ему, то есть умноженные в 3 раза ?

possible to make a crop modes:
1, set the function of the hot button?
2, worked in the movie mode?
3, with the activation of the crop mode, the screen displays the focal lengths equivalent to it, that is multiplied by 3 times?
#35
кроп моде для других аппаратов будет доступен, для 6д например?
crop mode for other devices will be available, for example 6d?
#36
Quote from: Walter Schulz on July 17, 2013, 10:19:42 AM
No. No, for 7D too.

Ciao, Walter
для других камер это возможно? для 650д например ?
For other cameras, it is possible? 650d for example?
#37
скажите, dual_iso может быть на наших камерах? или это только для марк3 ?
say, dual_iso be on our cameras? or is it just for mark3?
#38
Quote from: nanomad on July 14, 2013, 07:14:16 PM
And we have video crop mode! (just pushed it)
это просто замечательно, я так долго этого ждал, супер, еще бы аудиометр и порт для прошивки 1,0,4 и больше нечего желать)) больше спасибо!!!
it's just wonderful, I've been waiting for this, super, still audiometer and a port for firmware 1,0,4 and nothing more to wish for))  Thank you very much!
#39
Quote from: satriani on July 12, 2013, 01:22:27 PM
А без грипа ML работает?
Какой грип конкретно?
Какой билд?
В принципе проблем быть не должно.
Which grip? Which build Version? Please more info.
я уже решил проблему, оказывается флешка с мл была от 500д, короче все работает как надо. спасибо.
I have already solved the problem with the flash drive is from 500D ml was, in short everything is working as it should. Thank you.
#40
del
#42
General Help Q&A / 500d ML 2.3 & Eye-Fi
July 11, 2013, 01:40:11 PM
есть карта с Wi-Fi которая пристрастно работает с 650д, в 650д стоит МЛ на другой флешке, с картой Wi-Fi фотоаппарат работает на стандартной прошивке и карта нормально запускается с ним и передает файлы на ПК, а вот на 500д это карта не запускается, то есть фотоаппарат не включается, если удалить загрузочный флаг то фотоаппарат включается, но нет значка Wi-Fi и фалы не передаются файлы, а с загрузочным флагом 500д не включается с этой картой, помогите, как удалит МЛ с 500д что бы работала карта Wi-FI или как на нее установить МЛ. мне нужно что бы на 500д работала Wi-Fi, не важно с МЛ или без нее, главное Wi-Fi.

there is a map with Wi-Fi which is biased works with 650d, in 650d costs ML on other flash card, with Wi-Fi map the camera works at a standard insertion and the map is normally started with it and transfers files on the personal computer, and here on 500d it is a map is not started, that is the camera does not turn on if to remove a loading flag that the camera joins, but is not present the Wi-fi badge and фалы are not transferred files, and with a loading flag 500d does not join with this map, help, as will remove ML with 500d that would work a map of WI-FI or as on it to establish ML. it is necessary for me that on 500d would work with Wi-fi, the main thing of Wi-fi is not important with ML or without it.


#43
Quote from: _DK_ on July 01, 2013, 06:40:30 PM
The DISP button is missing on the 650D. Here is a view from above, where you can spot the missing button:
[spoiler][/spoiler]
кнопки "дисплей" на 650д нет, но есть датчик, если его закрыть то дисплей отключается, он делает туже работу что и кнопка "дисплей" на 600д.

the 'display' on the 650d, but there are sensor if you close the display is turned off, it does the same job as the button 'display' on the 600d.
#44
Quote from: nanomad on June 29, 2013, 10:02:51 AM
Yeah gonna push the fix out later today.

On a side note, good old 600D video crop mode is coming back (5x only)
я не совсем понял о чем речь, цифровой зум в режиме записи в 650д, я правильно понял?
I do not quite understand what I mean, the digital zoom is in the recording mode in the 650d, I understand correctly?
#45
как же 104 не может иметь высокий приоритет, если раньше из за нее откладывалась разработка МЛ для 650, разработчики сами сказали что не имея прошивки не могут сделать полноценную МЛ на 650, и вот когда она появилась говорят обратное.

as 104 can't have a high priority if earlier because of it development of ML for 650 was postponed, developers told that without having an insertion can't make full ML on 650, and here when it appeared tell the return.

how 104 can not be a high priority, if earlier it was postponed due to the development of ML 650, the developers themselves have said that without the firmware can not make a full ML 650, and that's when it appeared they say the opposite.

#46
скажите пожалуйста, когда примерны сроки выхода МЛ на новей версии прошивки 104? хотя бы примерно.

tell please when terms of an exit of ML are approximate on the version of an insertion 104 is newer? at least approximately.

please tell me when about release dates ML Keep up to firmware version 104? even approximately.

#47
Quote from: nanomad on June 15, 2013, 10:57:34 AM
but you'll loose the ability to run ML

да, но я думаю скоро появится МЛ под 104, или нет?
сейчас из МЛ я использую только фокус пикинг и гистограмму, но гистограмма есть и в стандартной прошивке. аудиометра все нет, сырое видео я не снимаю. думаю под 104 скоро должно быть обновления МЛ и там будет все работать хорошо.

yes, but I think there will be a ML soon under 104, or not?
now from ML I use only Focus peaking and the histogram, but the histogram is and in a standard insertion. the audiometer everything isn't present, I don't shoot raw video. I think under 104 there have to be ML updatings soon and everything will work there well.

yes, but I think I will soon be under the ML 104, or not? now from ML I only use the Focus peaking and histogram, but the histogram is in the standard firmware. audiometer no, raw video, I do not shoot. I think under 104 will soon be updating ML and there will be all work well.
#48
спрашиваю третий раз, потому что ни кто не ответил на прошлые сообщения. как можно удалить МЛ, что бы установить официальную прошивку 1,0,4, или МЛ можно не удалять, а  поставить сверху 1,0,4 ?

I ask the third time, because who didn't respond to last messages. how it is possible to remove ML what to establish an official insertion 1,0,4, or the ML can be not deleted, and to put from above 1,0,4?

asked a third time, because no one has responded to past reports. how to remove the ML that would establish official firmware 1,0,4, or ML can not be removed and put on top 1,0,4?

#49
I ask already the third time, so anybody and didn't answer how to remove ml what to put an official insertion, or it is possible not to delete and put on top?
#50
already in a course about an insertion official, tell and how me to be updated on it if costs ML how it is possible to remove ML?