Messages

Thanks, resizing the sd card to 256MB worked.

Thanks for the dumper.
Unfortunately it does not seem to dump anything. Nothing changed on the SD Card.
It looks like it freezes after saying "Dumping ROM0..." (i reset the camera after 1 hour).


This is the full log i get:

Code Select Expand

Magic Lantern Rescue
--------------------------
- Model ID: 0x0 ERROR
- Camera model: ???
- Firmware version: ??? / ???
- IMG naming: 100?????/????0000.JPG
- Artist: ???
- Copyright: ???
- Boot flags: FIR=0 BOOT=0 RAM=-1 UPD=-1
- Init SD... (101F64)
- Dumping ROM0...

Code Select Expand


CHDK CPU info for 0x0 ERROR
-----------------------
ID 0x41059461
Revision 0x1 1
Part 0x946 2374
ARM Arch 0x5 5
Variant 0x0 0
Implementor 0x41 65

Cache type 0x0F112112
Icache words/line 0x2 2 [8]
Icache absent 0x0 0
Icache assoc 0x2 2
Icache size 0x4 4 [8K]
Reserved0_2 0x0 0
Dcache words/line 0x2 2 [8]
Dcache absent 0x0 0
Dcache assoc 0x2 2
Dcache size 0x4 4 [8K]
Reserved1_2 0x0 0
Harvard/unified 0x1 1
Cache type 0x7 7
Reserved2_3 0x0 0
TCM type 0x000C00C0
Reserved0_2 0x0 0
ITCM absent 0x0 0
Reserved1_3 0x0 0
ITCM size 0x3 3 [4K]
Reserved2_4 0x0 0
DTCM absent 0x0 0
Reserved3_2 0x0 0
DTCM size 0x3 3 [4K]
Reserved4_10 0x0 0
Control 0x0005107D
Protect enable 0x1 1
Reserved0_1 0x0 0
Dcache enable 0x1 1
Reserved1_4 0xF 15
Big endian 0x0 0
Reserved2_4 0x0 0
Icache enable 0x1 1
Alt vector 0x0 0
Cache RRR 0x0 0
Disble loadTBIT 0x0 0
DTCM enable 0x1 1
DTCM mode 0x0 0
ITCM enable 0x1 1
ITCM mode 0x0 0
Reserved3_12 0x0 0
Protection Region 0 0x0000003F
Enable 0x1 1
Size 0x1F 31 [4G]
Undef0_7 0x0 0
Base 0x0 0 [0x00000000]
Protection Region 1 0x0000003D
Enable 0x1 1
Size 0x1E 30 [2G]
Undef0_7 0x0 0
Base 0x0 0 [0x00000000]
Protection Region 2 0x00000037
Enable 0x1 1
Size 0x1B 27 [256M]
Undef0_7 0x0 0
Base 0x0 0 [0x000000000]
Protection Region 3 0xC0000039
Enable 0x1 1
Size 0x1C 28 [512M]
Undef0_7 0x0 0
Base 0x60000 393216 [0xC0000000]
Protection Region 4 0xF8000031
Enable 0x1 1
Size 0x18 24 [32M]
Undef0_8 0x0 0
Base 0x7C000 507904 [0xF8000000]
Protection Region 5 0xFE000031
Enable 0x1 1
Size 0x18 24 [32M]
Undef0_7 0x0 0
Base 0x7F000 520192 [0xFE000000]
Protection Region 6 0x00000000
Enable 0x0 0
Size 0x0 0 [invalid]
Undef0_7 0x0 0
Base 0x0 0 [00000000]
Protection Region 7 0x00000000
Enable 0x0 0
Size 0x0 0 [invalid]
Undef0_7 0x0 0
Base 0x0 0 [00000000]
Region data perms 0x00333333
Region 0 0x3 3 [P:RW U:RW]
Region 1 0x3 3 [P:RW U:RW]
Region 2 0x3 3 [P:RW U:RW]
Region 3 0x3 3 [P:RW U:RW]
Region 4 0x3 3 [P:RW U:RW]
Region 5 0x3 3 [P:RW U:RW]
Region 6 0x0 0 [P:-- U:--]
Region 7 0x0 0 [P:-- U:--]
Region inst perms 0x00333333
Region 0 0x3 3 [P:RW U:RW]
Region 1 0x3 3 [P:RW U:RW]
Region 2 0x3 3 [P:RW U:RW]
Region 3 0x3 3 [P:RW U:RW]
Region 4 0x3 3 [P:RW U:RW]
Region 5 0x3 3 [P:RW U:RW]
Region 6 0x0 0 [P:-- U:--]
Region 7 0x0 0 [P:-- U:--]
DCache cfg 0x00000024
Region 0 0x0 0
Region 1 0x0 0
Region 2 0x1 1
Region 3 0x0 0
Region 4 0x0 0
Region 5 0x1 1
Region 6 0x0 0
Region 7 0x0 0
ICache cfg 0x00000024
Region 0 0x0 0
Region 1 0x0 0
Region 2 0x1 1
Region 3 0x0 0
Region 4 0x0 0
Region 5 0x1 1
Region 6 0x0 0
Region 7 0x0 0
Write buffer 0x00000024
Region 0 0x0 0
Region 1 0x0 0
Region 2 0x1 1
Region 3 0x0 0
Region 4 0x0 0
Region 5 0x1 1
Region 6 0x0 0
Region 7 0x0 0
DTCM cfg 0x40000006
Reserved0_1 0x0 0
Size 0x3 3 [4K]
Undef0_7 0x0 0
Base 0x20000 131072 [0x40000000]
ITCM cfg 0x00000006
Reserved0_1 0x0 0
Size 0x3 3 [4K]
Undef0_7 0x0 0
Base 0x0 0 [0x00000000]

Here are the images i took(with postprocessing for readability) for reference:
http://imgur.com/a/OIqck

I've used this one (http://www.magiclantern.fm/forum/index.php?topic=16534.0) but i guess it's only for cameras where ML is already installed?

Hi,
i'm a coder/immediate re who just bought a EOS 1300D and would like to port magic lantern to it.
I've read around the forum and the first step for porting is dumping the firmware. I've tried the portable rom dumper but unfortunately nothing happens(black screen, camera needs to be reset using the battery).
Another way i've seen is using specifically crafted .fir files.
What do i need to provide to get a .fir dumper for this camera from you?