Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - satriani

#1
70D_EDMAC_33




70D_NO_SLURP


No comment ;)

EDIT: Link from Dropbox is not a good idea  ::)
#2
Archived porting threads / Re: Canon 70D
January 04, 2015, 07:40:07 PM
Actually, there should not be this problem. Because the focus technology is different.
But there are still to discover some new stubs, which makes it very exciting :P
#3
Archived porting threads / Re: Canon 70D
September 15, 2014, 06:35:37 PM
Don't cry. Come better to Photokina  ;)
Small hint: Canon don't tolerate ML anymore and try to prevent things like this. But as you know there are no impossible tasks, you just need a little longer :P
#4
Archived porting threads / Re: Canon 70D
June 27, 2014, 03:40:05 PM
a1ex motivates others to become coders. I like this  :D
Just share the dumper, maybe any one have a lot of free time and motivation.
#5
Archived porting threads / Re: Canon 70D
May 11, 2014, 10:16:49 PM
Nanomad got the camera and fled the country :o
Joke  :P This is not an easy task to port 70D. Please be patient a little bit :)
#7
General Chat / Re: Canon EOS 70D (RAW possibility)
March 31, 2014, 11:50:06 AM
Not so pessimistic, maybe something will come of it ;)
#8
General Chat / Re: Canon EOS 70D (RAW possibility)
March 28, 2014, 11:35:00 AM
nanomad is as always ready to help
Good guy :D and I'm ready to help you if you need it ;)
#9
In most cases, no difference. I experiment sometimes with modules, so my builds can be unstable as of alpha builds on the ML site.
#10
Archived porting threads / Re: Canon 70D
January 19, 2014, 12:02:34 PM
No, I don't have 70D yet. But I see many owners complain about AF in the viewfinder. Not in LV mode!
#11
Archived porting threads / Re: Canon 70D
January 18, 2014, 06:33:53 PM
Hey guys,
anyone here have AF issue with 70D? :-)
#13
Just run a last firmware update.
#15
Also I can confirm that. How long can it take when specified too little info ;)
#16
Nice solution, but sadly we treat symptoms and not the cause :-/
#17
Guys please, befor posting your issue
1. Remove autoexec.bin and ML folder from your SD and extract new build again to SD. Then test again.
2. If issue is not with ML, then start your cam without ML by press and holding SET while start the cam or better with other SD without ML. Test again.
And always tell which build you use!

Quote from: NikeFreak on August 20, 2013, 02:34:57 PM
не работает зум, при нажатии + не приближает как раньше, не х10, не х5, не работают .
Zoom does not work when you press+ not advance like before, not x10, not x5, do not work.
Maybe, you mean

У меня зум работает отлично. Попробуйте без ML.
#18
Quote from: Ftlz on August 20, 2013, 02:24:53 PM
Well, I've upgraded but I cant see any options for LCD sensor. How can I enable it?

#19
The new build is online, enjoy the LCDsensor Remote  ;)
#20
Thats looks exactly like a RAW_TYPE 121 or something like this, which I tested yesterday. But the streaming seems to be unstable and give sometimes a broken pics.
Look at this:

this is a good pic


and this is a broken picture, which was taken two seconds later


But I think we are already closer to the solution  :)
#21
Quote from: magcharlie on August 19, 2013, 09:09:34 PM
Anyone else who noticed this problem? Maybe it has to do with those 1088 lines where in movie crop mode the last 8 lines are filled with rubish. It shows in Microsoft Media Player and in CyberLink PowerDirector which I am using.

Thanks

You're right. At least I can confirm that.
As always, wait for the solution :)
#22
So, you know what to do, it's time to use the warranty :)
But, do you see the frame freezes on the cam display while recording?
#23
Quote from: spider on August 19, 2013, 08:48:23 PM
But in this build you uploaded was no possibility to try it, right?
It was possible to load the module, but there was no new menu point, right?

There was a menu option, but the function was invalid, because adjustments are still required.
#24
No, I can't confirm this. It works fine for me.
Which build? Which SD card? More info please.
#25
Quote from: roterrion on August 19, 2013, 07:33:42 PM
my heart stopped a sec when i saw that dual iso toggle on my menu. you got me sir!  ;D

I have experimented with dual_iso and forgot to exclude this befor compiling ;D
This is not ready yet, but that will come ;)

Hey nanomad, you are really fast  :)