Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - blade

Pages: [1] 2 3 ... 8
1
Camera-specific discussion / Re: Canon 650D / T4i
« on: July 13, 2015, 07:47:07 AM »
Last week I thought I was missing the overlays. But figured it was something I did. I will check asap

2
Camera-specific discussion / Re: Canon 650D / T4i
« on: June 23, 2015, 11:04:32 AM »
Quote
My Problem
When i focus Object 1 and after that i focus with +/- to Object 2,then its going back automatically (its focusing back to Object 1) to object 1.it does not remain on Object 1.

From the user guide:

Quote
Follow Focus

Very simple follow focus (like a rack focus controlled manually).

Arrows: you will be able to focus with the arrow keys.
LCD Sensor: on 550D/500D, focus by placing your hand near the LCD sensor (avoiding shake). To use this, you may need to disable LCDsensor Remote.
Recommended focus step settings:

Focus StepSize: 1 or 2
Focus StepDelay: small values, without Step Wait
If the motion is not smooth, try larger delays (100ms)
Quick rack focus while recording:

Press MENU to save current focus point (this means I want to return here);
Use follow focus to change focus point (focus somewhere else);
Press PLAY to go to saved focus point;
Press PLAY again to go back.

Does it behave differently?

3
Camera-specific discussion / Re: Canon 650D / T4i
« on: June 05, 2015, 08:47:05 AM »
Quote
I am currently running the build from 1st of September 2014
Are there there some important changes between this and the most recent build?

There are changes almost daily, check the changelog or repository to see what is changed. If it is important....? that really depends on your needs i think.

4
Camera-specific discussion / Re: Canon 650D / T4i
« on: May 08, 2015, 12:29:05 PM »
Did you press the trashcan?

5
Camera-specific discussion / Re: Canon 650D / T4i
« on: April 01, 2015, 10:59:36 PM »
Please follow the instructions on screen. Post results here

6
Thanks for the effort Pelican. Sill not working do, should not matter as the link works!

7
EOS 650D, got some more info than walter

(not sure how to post the picture from dropbox, but here is the link.

Cool that it works without turning the camera on!

https://www.dropbox.com/s/uawd0finhm9kl28/Foto%2016-03-15%2023%2030%2005.jpg?dl=0


8
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 07, 2015, 04:57:38 PM »
Walter,

Also confirmed..

I have tested this setup
Ml nightly 2015mar02

Raw video  1728x972  ( I get 3 sec of recording)

After pressing +, I got a crash 2 times a had to remove the battery, last time i got a crash log:
https://www.dropbox.com/sh/9gf1ab6a4vl8nq1/AACAGY0fhBF8LX9iWQR-MRl6a?dl=0

set to 1280x720 test 3 times, 3 times camera freeze after pressing +, no crash log

set to 640 x360 est 3 times, 3 times camera freeze after pressing +, no crash log

Happy to test more if you find something!







9
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 05, 2015, 12:11:40 PM »
Quote
MLV recording. Start recording and press Loupe(+) -> Cam stalls, screen frozen. Have to remove battery.
Can you confirm?

I will test it asap, most likely this weekend!

10
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 04, 2015, 01:17:33 PM »
Confirmed,

I can trigger e.g. dim display by pressing info, however can't trigger it by lcd sensor.

11
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: December 11, 2014, 09:19:09 PM »
http://www.magiclantern.fm/forum/index.php?topic=3072.900

Please read the post of oct 29 of A1ex , it looks like some of the devs have run out of spare time, but they will be back.

If you look at the source:

https://bitbucket.org/hudson/magic-lantern/commits/all

You can see the lates commit is of Nov 22. So its just slow at the moment.

12
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: June 17, 2014, 03:28:33 PM »
Any updates on how the coding of the audio chip is going?

I believe you can find all info here± https://bitbucket.org/hudson/magic-lantern/commits/all

13
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: June 08, 2014, 03:36:11 PM »
Hi guys,

Where are the nightly 650d builds held? Or a reliable working version with some of the latest features. On my version if i enabled movie crop, then go back to photo mode i can't take a photo.

Thanks

https://builds.magiclantern.fm/#/

14
Feature Requests / Re: LCDsensor Remote - halfpressed/pressed mode
« on: June 08, 2014, 06:55:22 AM »
haha a1ex, you would almost tempt me to give it a try, however my coding skill are virtually non existent.

Can it be added to this list? http://www.magiclantern.fm/forum/index.php?topic=9625.0. ?

15
Feature Requests / Re: LCDsensor Remote - halfpressed/pressed mode
« on: June 07, 2014, 08:05:49 PM »
Unfortunately I also have no programming skills. lets hope that one of the devs picks this up!

16
Feature Requests / Re: LCDsensor Remote - halfpressed/pressed mode
« on: June 01, 2014, 09:10:14 PM »
I just wanted to request a similar feature. A friend uses a Panasonic, and they have the option to use the LCD sensor for autofocus. So if you move the camera to your eye, the camera starts autofocus or half shutter press. This can be a neat feature. Of course not as needed as the request from n8hawk. 

n8hawk, have you considered using a battery grip? http://www.camerashop.nl/product/178459/category-182632-battery-grip-voor-canon-cameras/canon-bg-e11-battery-grip.html The shutter butten is alo present on the device, maybe on a beetr location for you?


17
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 17, 2014, 10:43:41 AM »
any news on wether or not this is the data sheet needed to get things going with headphone monitoring?
[/quote

https://bitbucket.org/hudson/magic-lantern/commits/09dded0ff50e5e1ad50168fb0dc42b3177f6fc33
https://bitbucket.org/hudson/magic-lantern/commits/874a80577fd16d7e352f247f857bc5dd87c01e71

Looks like someting is happening with the datasheet..... 

18
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 10, 2014, 07:08:07 PM »

19
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 10, 2014, 06:32:18 PM »
 :P Looks like Nanomad has you covered.... sounds like it should be finished in no time  ;)

20
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 10, 2014, 06:26:40 PM »
How long do you think it will be before we see headphone monitoring on the 650D? I’m not trying to be a pest, I’m just curious. I know the people who help in the development work hard and donate a bunch of their time. Do you think it could me a few weeks out, a few months out, a year or so, or could there be some factor that could make it so it might never happen?

Generally, what’s involved with adding a feature like this? Are there other problems that have to be solved or reversed engineered before hand?

your question may be considered a troll question. I do however believe that your requested feature is on the wish list of the developers. If you are a developer yourself, please feel free to contribute. A time frame is: its done when its done... could be tomorrow, could be never....

21
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 09, 2014, 01:18:11 PM »
i can't fine the DUAL_ISO.MO in "Module".

But i found ettr.mo, file_man.mo, pic_view.mo and raw_rec.mo only. Any idea how to put in or make the DUAL_ISO.MO appear and working?

Do you use the latest build?

22
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 04, 2014, 01:22:45 PM »
There are issues. Check the first post.

I am aware of the bugs, and other stuff that is not working 100%, but please consider that this an alpha build...

23
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: April 04, 2014, 07:00:39 AM »
just a shout out to the devs...  its nice to see so much active development. I use ML 100% of my shooting, and (almost) everything is 100% stable. Best alpha i have ever tested. Its clear from that activity on this tread that there are almost no issues. Props!

Keep up the work, if there is any additional stuff i can help with ( i will keep moderating these treads) you know how to find me! 

24
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 23, 2014, 07:43:26 AM »
Hello, is there any side, for good Setting for ML... thx

http://wiki.magiclantern.fm/userguide

25
Camera-specific discussion / Re: Canon 650D/T4i 1.0.4 [Status: Alpha]
« on: March 20, 2014, 03:22:36 PM »
as far as i know, you are out of luck, decrease the resolution and you will be fine.

Pages: [1] 2 3 ... 8