Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - ch_d

#1
OMG! ML team - You are the best!
#2
What I have noticed on the latest build is that the batteries are draining very fast.
Regularly I worked with a 2013 version on my 5DM2 and the batteries lasted longer.

#3
Quote from: timbytheriver on September 26, 2018, 02:37:30 PM
@Walter Schultz I did that. It doesn't appear to refer to my problem at all. Have I missed something?   ::)

Try mlv_rec and no mlv_lite.
Just load: mlv_rec, mlv_snd and raw_twk
#4
fyi: When I connect my smallHD DP6 I got bad frames every few seconds with mlv_rec + mlv_snd + raw_twk
#5
Hello.
I am new to MLV App and would like to know what is your best setting for the 5DM2.

Is it necessary to use: Raw Corrections like: Pattern Noise or Chroma Smooth?

Please share your experiences.

Thank you
#6
OK, I ask differently. Is it possible to record sound with the latest "anniversary build"?
#7
Sorry guys - I have to jump in:
When I load mlv_lite + mlv_play + raw_twk I have no sound.
On the audio tab there is this orange writings: "Sound recording is disabled. Enable it from Canon menu."
But it is enabled in Canon menu

Thank you!
#8
Hello guys.
Thank you very much for this excellent work on the 10bit 5DM2 version... Work really well.
Is it possible to implement sound into this build?

Thank you very much.
8)
#9
Long time no see / hear guys. What´s going on - Any news on the 10/12 bit progress on 5DM2?
#10
1:1 not working: That´s a pity. I don´t like the crop mode (because of FOV / DOF).
#11
@dfort: i would love to test a current 5D2 build (don´t know how to make a pull request  :-\)
#12
@reddeercity - yes, link please.
#13
Any updates for the 5DM2?
Where can I find the latest builds?

Thank you all - you are the best  8)
#14
What do you mean by "works on every other frame"?
#15
Let me know if you need a 5DM2 (+VAF Filter) tester ...
#16
Thank you for your help!
#17
Hi.

I still use an old build for my 5DM2 from: 24.Oct 2013 with good performance.
On an upcoming project i need ML again - is there any new and STABLE RAW build for my old 5DM2?
HDMI monitoring would be nice!

Thnx
#18
Hello.

What i really hate on recording h264 with the 5DM2 is, that the resolution drops on my external monitors. With the RAW recording feature the resolution stays super clear and sharp on my external monitor.

Now i have a project where i want to record "the old way" with h264 BUT i want this full res HDMI out!

Is there a way for this?

Thanks
#19
Hi.

I´ve always conformed (not converted) my 30fps files (sooner with the "normal" 5DM2 .movs) to 25fps in Apple Cinematools.
With the ProRes files coming out of RAW2DNG this feature is greyed out ...?
Is there a solution for this?

Thnx guys
#20
Quote from: meditant on May 09, 2014, 04:14:28 PM
Where can i find a compiled version for mac os x with mlv support, i try somes ffmpeg for mac os x but none can decode mlv ?

Best regards

+1
#21
Quote from: budafilms on April 10, 2014, 07:31:00 AM
I am working with March 17. No problems with .RAW

Thank you! I´ll try
#22
Quote from: Steven on April 09, 2014, 08:37:21 PM
@Midphase
What card exactly are you using? Are you on 1.1.3 oder 1.2.3?

@ch_d
I would stick with firmware 1.1.3 if you are ok with the slightly windowed 720p HDMI output (I personally have no experience using raw video and hdmi monitoring on the old 1.1.3 firmware, on 1.2.3 it worked fine...).
It is for now the more stable platform if you want to max out the write performance (I doubt you will reach continuous recording at 1920x1250@30fps).
And raw rec is more stable than mlv, so if it is not absolutely necessary, better find another solution
to sync sound in post.
If you really need 30fps, raw and 3:2 aspect, better settle for less resolution. It is still plenty of detail and will upscale nicely...
Using the HDMI for monitoring also might decrease write performance.

Oh yeah!
This sounds really great. Could you tell me which build you are using with 1.2.3?
You said HDMI out works fine on 1.2.3: This is what i really need for the directors monitor.
I don´t really need continuous recording - 15-20 seconds will do it (it´s a music video shooting) - i can still lower the resolution.
And i want to use RAW rec because this is a more comfortable workflow for me.

Thank you for your help!

#24
Hey.

What is the latest, most stable RAW (not MLV) build for the 5DM3 on 1.1.3?
Please tell me.

Thank you,
ch_d
#25
Hello.

I shot a lot of footage on my 5DM2 RAW with my Iscorama Anamorphot 1.5x. Mostly (cause of the CF limitation) like 10sec clips.
Next week i have a shooting where i need continuous 1920x1250 on 30fps. (i don´t need all the 1920 - so about 1750 would do it too)
So i will shoot with the 5DM3. Can you give me a hint / links where i can find the best / stable version for the 5DM3 on 30fps with sound (low quality is enough, just for synching), please.
And stability on an external HDMI monitor.
And what Canon firmware do i need on the 5DM3?

Thank you,
ch_d