Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - matteopd

#1
Camera-specific Development / Re: Canon 750D
November 12, 2019, 11:43:20 PM
Ingenuous question: what may happen if I try to install the release for 700D on my 750D?  :D
#2
Camera-specific Development / Re: Canon 750D
September 12, 2019, 11:45:50 PM
Alex what do u think?

Quote from: names_are_hard
link=topic=17627.msg220502#msg220502 date=1568254372

I'll do it for $20k a month, if you pay a year in advance.  I don't know if I'll succeed.

Or, see this thread where trying to arrange paying devs is discussed:
https://www.magiclantern.fm/forum/index.php?topic=24339.0
#3
Camera-specific Development / Re: Canon 750D
September 12, 2019, 12:48:40 AM
Hi Alex! I tried but I'm not so skilled in coding. However I really wish to help. Is there any developer I can finance personally to build the release? Thank you!



Quote from: a1ex on September 07, 2018, 09:54:00 AM
Just a heads up - porting the 80D startup code to other models is really just a matter of updating the stubs and startup constants, and can be tested/debugged in QEMU. Verified on 5D4 and 200D. Source code (still) on the digic6-dumper branch.
#4
Camera-specific Development / Re: Canon 750D
August 21, 2018, 12:13:15 PM
Hi All! How are you?

@t3r4n it seems you are the one with deeper experience in this porting.

Months ago I helped with the ROM dumpering but I wasn't able to go further due to my lack of programming knoledge.

Is there anything I can help now, for example testing something with a real 750D?

Thank you
#5
Camera-specific Development / Re: Canon 750D
November 11, 2017, 10:02:05 AM
Quote from: t3r4n on October 22, 2017, 09:24:46 AM
Hi a1ex,
thanks for the reply regarding booting I was able to solve that. On my way to the qemu directory I saw the the makeboot script and inside there I saw my fault of not giving the right name to the card ...  :-\

CPU Info from here http://www.magiclantern.fm/forum/index.php?topic=17714.25 works as FIR not the autexec.bin Version (stalls after the second line). I will try to post some good images in the relevant thread later (during blanking the phone focusses out and when it has gained focus again the data already scrolled away  >:( and the camera with manual focus is not able to shoot its own back  ;)
The display Test http://www.magiclantern.fm/forum/index.php?topic=14732.0 works but will show only one solid colour as background.
Model ID: 0x393 750D, Camera Model: EOS K393, Firmware 1.0.0 / 8.7

Regarding qemu after some trouble with python pip not working with the compiler I had enabled in my environment I was able to compile qemu and boot it with the default ML and my ROM in the end I got the same result as above.

Hi t3r4n, where are you from?
#7
Camera-specific Development / Re: Canon 750D
September 22, 2017, 02:33:19 PM
Quote from: Walter Schulz on September 22, 2017, 02:20:00 PM
http://www.magiclantern.fm/forum/index.php?topic=7569.msg65360#msg65360

I thank you very much.

So what a1ex said in his last message is to use his file to enable the camera boots from the SD? But then, what to do if we do not have a proper ML file to upload on the SD cause it's on development?

Thank you
#9
User Introduction / Re: Italian ML users say Ciao here!
September 22, 2017, 01:05:34 AM
Quote from: eNnvi on August 10, 2017, 05:39:25 PM
Beh inizia facendo un dump del firmware poi il primo passaggio è fare il boot in qemu.

Fatto ciò sei a buon punto, bisognerà risolvere i problemi di cache, per farlo però, una volte che sei riuscito, dovrai testare direttamente se funziona in camera perchè qemu, per quanto sia un ottimo emulatore, non riesce a riprodurli.



Benvenuto :D

PS se fai un dump passamelo che provo anche io

Grazie! Ho scaricato il file per il dump ma non ho ben capito dove devo caricarlo. Sulla SD della camera?
Ho trovato l'inghippo: io attendevo l'avvio automatico con l'accensione della macchina invece dovevo cliccare su "aggiorna firmware".
Morale: ce l'ho fatta ed i file li trovi qui https://drive.google.com/open?id=0B1i8JM5O4Zi8TmdkX1VTWUdzcWs
#10
Esiste qualche guida su come muovere i primi passi per un porting su 750d?
#11
Camera-specific Development / Re: Canon 750D
August 09, 2017, 11:47:17 PM
Quote from: Lenodroid on February 13, 2017, 09:39:19 AM
So Quick Update:

I need someone who is ready to work with me. The .dis file is 410MB big the firmware dump.......

If someone is ready to bring ML to 750D please PM me...

Are you still here? I've tried to PM you several times.
#12
Camera-specific Development / Re: Canon 750D
August 09, 2017, 11:43:43 PM
Quote from: Walter Schulz on July 12, 2017, 03:05:18 PM
Again: If there is no ML for your cam (and there isn't for 750D) act like there will be no ML port for this cam ever.

You can buildup your skills in programming ARM architecture in C and assembler.

Is there a guide to follow step by step to help?
#13
Camera-specific Development / Re: Canon 750D
June 30, 2017, 12:02:48 AM
I'm still here willing to help if someone more skilled tells me what to do or with what to start with.
Thank you
#14
Camera-specific Development / Re: Canon 750D
February 27, 2017, 11:33:54 PM
Hi, how may I help? I'm ready to test!
#15
User Introduction / Re: Italian ML users say Ciao here!
December 29, 2016, 12:33:03 PM
Ciao a tutti.

750D come prima esperienza