Messages

[- 3k 12bits lossless- Lens : EF 24 - 70mm 2.8- Graded on Resolve using Koji color lut]

Hello everyone,

It's been a while since I came back on the forum to post something but I switched from 5DIII ML RAW to Lumix S1H.

But like many I'm still strongly on the 5DIII RAW which with the years is still wonderful to use, I recently started guitar making, and of course why not use my good old 5DIII with ML to do a little teasing of a futur guitar build.

- 3k 12bits lossless
- Lens : EF 24 - 70mm 2.8
- Graded on Resolve using Koji color lut

A simple solution is to switch to Resolve, right click on the clip then "Clip attributes" then at the bottom you can make your scaling adjustments : 2x 4x.. It's work very well and fast

Awesome, I like it!

Thanks you !

Dear folks,
Great videos. And especially great colour grading! I would make an little advert for Dannes 5.7k magic lantern build.

Thanks for your feedback

I have indeed seen that Danne has released a new version a short time ago that I have not yet tried (I am now on the panny S1H and I shoot less with the 5DIII RAW but i'm still a great lover of MLRAW)

my footage of 2018 are only made with the old version which allows to shoot in lossless 11/12/14 bits

Hello folks,

a little edit greatly inspired by the universe of Akira and its soundtrack (Japanese manga/anime from the 80's that I particularly like) to show the loneliness one can feel in Tokyo despite the fact that this city is very populated.

I used my old rushes from my trip to Japan in 2018

5DIII RAW 1920x1080@30fps 12bits lossless

Very nice grade and cleans shots.

But masks at 0:18 and 0:27 are not clean. We can easly see borders of masks.

I think you could use just simple transitions.

what was your post workflow?

1) Using MLVFS for extract + import DNG in Davinci Resolve 14

2) Setting up my color management for Arri Log C in DR14 projects settings

3) White balance correction for each clips + ML Cinelog-C to Ektar 100 LANDSCAPE LUT +  custom grading

4) Export clip in DNXHD 422 10 bits and import in Premiere pro

5) Use Film Convert + custom correction with Lumetri on effect layer.

@Lars Steenhoff

Thanks you ! All was shot with the first canon 24 70 2.8 + ND filter.

@pc_bel

Thanks for you feedback !

Can you tell me which clips look like too burned ? I will try to fix it or replace scenes.

Hello,

I just finished my edit about my 2 week travel in Japan (march 2018)

All clip was recorded in 1920x1080 29 fps 14bits lossless, i get some pinkframe on 2 clips, but i think it was because i used the magic zoom (there are some liveview tools who cause this issue).

Graded in DR14 + Film Convert in PP

Lot of clips are recorded hand-held and stabilised on DR14, so there are some bad artifacts..

Cheers

Thanks, hyperlapse was a big question for me.

Ctrl + shift + skip, check mlvfs.exe and stop the program.

Maybe there is best solution than this one. 

I'm amazed by your film, grading/plans are perfect. I was hypnotised. The music is well chosen.

Good job.

I also use W10 and i use this version of Dokan and this version of MLVFS without any problems.

Hope this will help you.

What is your operating system + what is your version of Dokan ?

[html_template.html]

hello can someone give me a hand?
i did everything and the virtual drive is mounted but when i go to
http://localhost:8000
it just says
HTTP Error 404. The requested resource is not found.

Do you have these files, especially html_template.html and jquery-1.12.0.min in your MLVFS folder ?

Hello, un petit rappel pour dire qu'on existe on est tout juste 37 membres depuis, si vous voulez causer ML en Français n'hésitez pas !

Amazing work, congratulation for all the team behind this movie.

Bonjour,

J'ai eu l'idée de lancer ce groupe dans le but de rassembler la communauté Française s'intéressant de près ou de loin magic lantern. Je vois beaucoup d'utilisateurs francais débutants un peu perdu ou mal informés par rapport aux options, l'utilisation générale.

Donc je me dis que la création de ce groupe pourrait être la solution pour pas mal de réponses.

https://www.facebook.com/groups/610808995710189

@goldenchild9to5 thanks you ! It's really not much

Just use MLVBrowersSharp , right click on DNG+wave then it open to a window to save , (see next image)

1 by RedDeerCityTV, on Flickr

Select which drive or folder you want.

2 by RedDeerCityTV, on Flickr

Thanks for your answer, but as you can see in my picture :



all my DNG sequence are mixed in a same folder; i see you are using windows 7, maybe this issue is only about windows 10.

I did not know the existence of MLVViewSharp, thanks you reddeercity.

But do you know how extract DNG into separate folders ? All the DNG are exported in the same directory.

Today i was bored at my home, then took my 5D mark III for a walk and did some anothers test (because i love tests) in 3k 12bits lossless 

Extract with MLVFS and working/graded with Resolve 12.5.

=> Tokina 11-16mm 2.8 only

https://vimeo.com/221104635

Thanks you @DeafEyeJedi !

Sorry if i answer to late about your question i was a bit busy these last days.

I used the hyalinejim's Ektar 100 Landscape LUT with  the Color Management Setting of Davinci Resolve 12.5 :

Thanks for your links hyalinejim ! I will take a look and fav it !

About transitions i used the chung dha's transitions preset for premiere pro.
Smooth zoom transition are free, if you want pan/tilt/diagonal smooth transition its only 5 euro, it's a good deal, you don't lose time to adjust manuely your transitions.